rk3399 device has two vops. vopl and vopb. vopb supports four windows of 4960x2160p while vopl only supports two 2260x1920p windows.
I'll have to check the DTS and make hdmi use vopb.
Keep in mind I don't own this board and hence I have no ability to test this board.
rk3399 device has two vops. vopl and vopb. vopb supports four windows of 4960x2160p while vopl only supports two 2260x1920p windows.
I'll have to check the DTS and make hdmi use vopb.
Keep in mind I don't own this board and hence I have no ability to test this board.
Oh wow, thank you for this, I didn't realize you could even choose which VOP in the DTS.
I'm going to switch mine later today and undo my VOP source hack.
Once you know what the DTS edit is, please let me know, I'll immediately test it on my pine rockpro64 rk3399 board.
My VOP is indeed using the little version, and when I look at my DTS, it's not immediately obvious to me how to select the big VOP.
Thanks all for explanation but if we take the look on the my first post we see what early build not have samba, 4K, CEC, sound problems.
This BOX under native installed Android 7.1 and latest KODI working fine. Only one issue. Framerate auto switching. This is my cause to open observance to find alternatives.
Positive moment in the last NP build is very good downscaling speed and network cashing for 4K content. I dont have freezing and dropout. Maybe new drivers for Ethernet and hardware acceleration is implemented.
samba: install it yourself
framerate switching: that has always worked, just not for >1080p
4K: VOP problem is getting fixed now
if having CEC problems: I suggest rolling backwards to ayufan kernel 4.4.138-1100
if having sound problems: same; I suggest rolling backwards to ayufan kernel 4.4.138-1100
Here you go:
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-linux.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-linux.dtsi
index 2851cd529e04..79a520a704f9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-linux.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-linux.dtsi
@@ -124,12 +124,12 @@
route {
route_hdmi: route-hdmi {
- status = "disabled";
+ status = "okay";
logo,uboot = "logo.bmp";
logo,kernel = "logo_kernel.bmp";
logo,mode = "center";
charge_logo,mode = "center";
- connect = <&vopl_out_hdmi>;
+ connect = <&vopb_out_hdmi>;
};
route_dsi: route-dsi {
@@ -152,6 +152,14 @@
};
};
+&dp_in_vopl{
+ status = "disabled";
+};
+
+&hdmi_in_vopl{
+ status = "disabled";
+};
+
&pinctrl {
isp {
cif_clkout: cif-clkout {hello I try to install the second last version I have took from Mega I create image in SD card I start but no display ,
how is the right way to install
thank you
ve uploaded a new image with minimal changes: MEGA Let me know if everything still works
hello anybody know how to install this rom im my Videostrong-mecool vs rk3399 device
Etcher works flawlessly. It should help you to flash sd card.
ve uploaded a new image with minimal changes: MEGA Let me know if everything still works
hello anybody know how to install this rom im my Videostrong-mecool vs rk3399 device
Write image to SD card. Put SD card in the SD card slot and power on 3399
AWESOME!
Will that VOPB fix make it upstream so everyone's builds will get better?
Pretty much everyone with any rockchip device is going to need their DTS fixed up.
( I also had to enable RKVDEC, RGA, VPU, and so forth, just to be able to decode HEVC/x265/4K@60fps. )
Write image to SD card. Put SD card in the SD card slot and power on 3399
thank you I have done but nothing happens when I power on no display on screen
i use two soft to burn
balenaEtcher-Setup-1.4.9-x64
LibreELEC.USB-SD.Creator.Win32
and sd ca 2g
both shows ok but i put the sd card in the slot power on but nothing,any help please
AWESOME!
Will that VOPB fix make it upstream so everyone's builds will get better?
Pretty much everyone with any rockchip device is going to need their DTS fixed up.
( I also had to enable RKVDEC, RGA, VPU, and so forth, just to be able to decode HEVC/x265/4K@60fps. )
That's the plan.
i use two soft to burn
balenaEtcher-Setup-1.4.9-x64
LibreELEC.USB-SD.Creator.Win32
and sd ca 2g
both shows ok but i put the sd card in the slot power on but nothing,any help please
Change HDMI input on TV or connect to PC Monitor via HDMI and check.
thank you I try the HDMI is check but is not this problem
That's the plan.
1) Is this build hardcoded to speak to Videostrong hardware, or does it contain the full DTB tree for the tons of rk3399 variants, such that if I threw it on my pine rockpro64, it would figure itself out?
2) What kernel version is it? ( if it's not exactly 4.4.138 I will be unable to use it, because my designware/synposis "i2s"/bridge driver goes bad past 4.4.138 which is what my rockpro64 uses for HDMI-carried audio I think?; anyway >4.4.138 floods dmesg with 'fail to clear' errors and audio goes -1,000x speed, sounds like a demon when you play a file if using >4.4.138). How would I even begin getting help with that?
