I'm not sure, because Android also crashes/freezes and without you u-boot CE/LE/Android not. Has nothing to do with CE/LE or Android i think. Maybe a small piece in u-boot, wrong memory addressing or something.
Remote power trouble
-
tyrol_gangster -
January 24, 2018 at 8:54 PM -
Thread is Unresolved
-
-
Thank you for your reply.
I have fixed the bug. You do not have to disable the CEC driver
Download (for LPDDR3 Devices)
Does it work in the h96 pro+ revision wisdom? I suffer from this problem
-
Please make some photos of the PCB, memory type (ddr3, ddr4 or lpddr3) is crucial
Edit: You have DDR3-
1600..? I'll post it late at night. -
...Maybe a small piece in u-boot, wrong memory addressing or something.
All devices with LPDDR3 work without problems with this u-boot, except yours. Mine runs day and night. Nobody has any trouble with his box until now.
At the memory addressing nothing was changed.
-
-
mega-samu
not testedOk, thanks. This weekend I'm trying, I'm examining.
I leave the photos of the box and I am sorry for not being able to send them to you before.
-
Which uboot should i use
i would like to retain alteast the ram speed that the stock uboot uses
H96 PRO+ 3GB 32GB
PCB CZ-S32-v2.2 20161012(A15)
QL 1730
JOB20170808 3+32/9377
1 x amlogic S912 OCTA-CORE BODGHN01404 J-TNA346.00
1 x 32GB Toshiba 19nm THGBMBG8D4KBAIR 170821AE EMMC HS400 V5.0 Read 270MB Write 90MB
1 x Fn-Link 8223A-SR COB009 1732 (QCA9377 433Mbps 1T1R 802.11a/b/g/n/ac BTLE 4.1)
1 x RTL8211F H6120H4 GH25 Gigabit Ethernet Transceiver
1 x GL850G HH4JB05Y22 713SGF9891 Genesys Logic 4 Port USB 2.0 Hub
2 x 1GB SpecTek 512X16DDR3 HL - FC4F 1708 / DY6L 1704 (SpecTek State 1600MHZ DDR3 1.5v) (rebadged Micron 512x16 DDR3L 1866 CL13)
2 x 512MB Micron 6EN77 D9SDD 3ZRJ (256X16 DDR3L 1866 CL13) D9SDD full PN=MT41K256M16LY-107:N
-
i would like to retain alteast the ram speed that the stock uboot uses
then i need a log from stock u-boot
-
then i need a log from stock u-boot
is there any way to get that without serial access as i dont have a serial cable
-
is there any way to get that without serial access as i dont have a serial cable
No.
Please test the u-boot@912Mhz_DDR3. I doubt that your stock uboot runs over the 1000..Mhz range
-
No.
Please test the u-boot@912Mhz_DDR3. I doubt that your stock uboot runs over the 1000..Mhz range
ok will make an image now with the amlogic customization tool
is that 912mhz/1824ddr
or
406mhz/912mhz ddr
-
is that 912mhz/1824ddr
or
406mhz/912mhz ddr
Both memory variants run at 912Mhz
-
Sorry im not explaining it right
PC3-12800 Runs at 800mhz which is 1600 DDR
is the 912mhz the actual mhz e.g. 1824 DDR
-
It bricked btw flashing 912
flashing my stock bootloader back now via sd card
-
It bricked btw flashing 912
flashing my stock bootloader back now via sd card
That's why I need log from Serial console
-
I pulled the 792mhz bootloader.PARTITION from S912_H96_3G_DDR34_171120_MAC_ubootfix
and im flashing it now combined in aml_7.1.2_s912_q9377-S912_mac-20180409
-
ok it worked
and its powering on and off from the remote in le 8.2.2.3 kszaq build
can i get a link to your latest ddr3 uboot @ 792
just incase the one in S912_H96_3G_DDR34_171120_MAC_ubootfix
is an old build with problems
-
Sorry im not explaining it right
PC3-12800 Runs at 800mhz which is 1600 DDR
is the 912mhz the actual mhz e.g. 1824 DDR
Supported DDR3 CLK Range:
7-7-7: 375 ~ 533mhz
9-9-9: 533 ~ 667mhz
11-11-11: 667 ~ 800mhz
12-12-12: 800 ~ 933mhz
13-13-13: 933 ~ 1066mhz
