Remote power trouble

  • I'm not sure, because Android also crashes/freezes and without you u-boot CE/LE/Android not. Has nothing to do with CE/LE or Android i think. Maybe a small piece in u-boot, wrong memory addressing or something.

  • mega-samu

    Please make some photos of the PCB, memory type (ddr3, ddr4 or lpddr3) is crucial


    Edit: You have DDR3-1600 ..? I'll post it late at night.

    Edited 2 times, last by bumerc ().

  • ...Maybe a small piece in u-boot, wrong memory addressing or something.

    All devices with LPDDR3 work without problems with this u-boot, except yours. Mine runs day and night. Nobody has any trouble with his box until now.

    At the memory addressing nothing was changed.

  • Which uboot should i use

    i would like to retain alteast the ram speed that the stock uboot uses



    H96 PRO+ 3GB 32GB

    PCB CZ-S32-v2.2 20161012(A15)

    QL 1730

    JOB20170808 3+32/9377


    1 x amlogic S912 OCTA-CORE BODGHN01404 J-TNA346.00

    1 x 32GB Toshiba 19nm THGBMBG8D4KBAIR 170821AE EMMC HS400 V5.0 Read 270MB Write 90MB

    1 x Fn-Link 8223A-SR COB009 1732 (QCA9377 433Mbps 1T1R 802.11a/b/g/n/ac BTLE 4.1)

    1 x RTL8211F H6120H4 GH25 Gigabit Ethernet Transceiver

    1 x GL850G HH4JB05Y22 713SGF9891 Genesys Logic 4 Port USB 2.0 Hub

    2 x 1GB SpecTek 512X16DDR3 HL - FC4F 1708 / DY6L 1704 (SpecTek State 1600MHZ DDR3 1.5v) (rebadged Micron 512x16 DDR3L 1866 CL13)

    2 x 512MB Micron 6EN77 D9SDD 3ZRJ (256X16 DDR3L 1866 CL13) D9SDD full PN=MT41K256M16LY-107:N



  • Sorry im not explaining it right


    PC3-12800 Runs at 800mhz which is 1600 DDR


    is the 912mhz the actual mhz e.g. 1824 DDR

  • I pulled the 792mhz bootloader.PARTITION from S912_H96_3G_DDR34_171120_MAC_ubootfix

    and im flashing it now combined in aml_7.1.2_s912_q9377-S912_mac-20180409

  • ok it worked

    and its powering on and off from the remote in le 8.2.2.3 kszaq build


    can i get a link to your latest ddr3 uboot @ 792

    just incase the one in S912_H96_3G_DDR34_171120_MAC_ubootfix

    is an old build with problems

  • Sorry im not explaining it right


    PC3-12800 Runs at 800mhz which is 1600 DDR


    is the 912mhz the actual mhz e.g. 1824 DDR

    Supported DDR3 CLK Range:

    7-7-7: 375 ~ 533mhz

    9-9-9: 533 ~ 667mhz

    11-11-11: 667 ~ 800mhz

    12-12-12: 800 ~ 933mhz

    13-13-13: 933 ~ 1066mhz