Khadas VIM2 and DTV board

So...do we have to install this addon in LE 9.0?

Or only with the dtb will be enough?

Regards

In kernel is standard internal dvb tuner. In this special dvb driver addon is modified I2C communication for internal dvb driver. After installing addon you can select driver version. Video how it works.

Thnx, afl1

but Tvheadend don't scan muxes with any drivers version.

Pls, provide debug log from TVH. In Debugging menu (in webif <ip>:9081) enable Debug subsystems: linuxdvb,mpegts. Send me log from both scanning.

Quote from afl1

Pls, provide debug log from TVH. In Debugging menu (in webif <ip>:9081) enable Debug subsystems: linuxdvb,mpegts. Send me log from both scanning.

OK, but tomorrow

I am trying LE 8.90.1.1 + proposed DTB by afl1 in this thread and dmesg says "i2c i2c-1: avl6862: attach failed reading id"

Please afl1 , can you put the right links to the LE and DTB images intended to test the khadas vim2 pro + VTV expansion?

Just installed the android firmware with VTV drivers (VIM2_Nougat_vTV_V171024.7z) and it works perfectly (including a 4K channel). Here the dump of DTB partition and the dts.

Try to use this gxm_kvim2.zip .

Quote from afl1

Pls, provide debug log from TVH. In Debugging menu (in webif <ip>:9081) enable Debug subsystems: linuxdvb,mpegts. Send me log from both scanning.

Hi afl1

Logs here

logs.zip

Quote from sch61

Hi afl1

Logs here

logs.zip

Have you replaced dtb in box from my previuos post?

No. Now I'll try

Quote from sch61

No. Now I'll try

Yes, I think issue is in wrong dtb. Pls, test it.

afl1, With your dtb.img

All logs looks good, from point of driver operations. Driver can scanned pids, but something is wrong with content. Have you tested dvb-t?

No. Can try dvb-c.

afl1

Sorry, configure dvb-c in first time. Could make mistakes.

Quote from afl1

Try to use this gxm_kvim2.zip .

Thank afl1

I am trying that DTB with LE-8.2.2.3 from kszaq and it seems to scan, but not tunning. I attach the TVH log for DVB-S and DVB-T.

By the way, the predefined muxes configuration for Astra19.2E in the TVH 4.2.5 from LibreELEC repo 8.2.113 is wrong and I have had to manually add 3 in order to test (I think data is right, from kingofsat listings).

Quote from caligari

Thank afl1

I am trying that DTB with LE-8.2.2.3 from kszaq and it seems to scan, but not tunning. I attach the TVH log for DVB-S and DVB-T.

By the way, the predefined muxes configuration for Astra19.2E in the TVH 4.2.5 from LibreELEC repo 8.2.113 is wrong and I have had to manually add 3 in order to test (I think data is right, from kingofsat listings).

they previously said us that we have to test in libreelec 9.x . Driver won't work at all for 8.2.2.3