Really strange! Is this likelier a TvH or oscam problem? I'm trying to remove oscam completely (deleting its addon_data folder) and reinstall.
not sure, tvh 4.1... works for me like a charm
as long the "new" version works I don't really care why its working ;D
This is the error that comes up:
Log: 2016-05-27 21:25:36.763 [ INFO] subscription: 0167: "127.0.0.1 [ Kodi Media Ce - Pastebin.com
[WARNING] descrambler: XXXX odd stream key is not valid
[ ERROR] descrambler: ECM late (18 seconds) for service "XXXX"
sounds for me that tvh didn't get the keys in time
I`m not sure if there is a oscam problem but if this is fixed with the new package - why not ;D
Hi. On older oscam versions I have set oscam dvb api boxtype set to pc-nodmx and everything works great with vdr and tvh. With new versions of oscam (higher than 11077) for proper work with vdr I have to change boxtype in oscam on pc . Then Everything works good . If I have pc-nodmx it decode just one channel and then stop decoding after change channel. With TVH everything is good with boxtype pc-nodmx
[WARNING] descrambler: XXXX odd stream key is not valid
[ ERROR] descrambler: ECM late (18 seconds) for service "XXXX"sounds for me that tvh didn't get the keys in time
I`m not sure if there is a oscam problem but if this is fixed with the new package - why not ;D
Sadly, it is not. I've had some more time to test and I'm getting the same error messages with build 11233 after a while. To summarize:
LE oscam: Not working - getting error messages from the beginning.
OE oscam (Build: 10607!): Working - pretty stable, getting said error message once in an hour.
Build 11211: Not working - getting error messages from the beginning.
Build 11233: Not working - getting error messages each 10 minutes.
So I haven't found a fully working oscam version yet. And I do think that maybe not oscam but tvh is the source of this problem. Any Wetek Play users that have LE fully working (tvh+oscam)?
CvH: When I update to OE oscam using GUI, I do not get 7.0.1 but 6.0.1. So it installs addons from the old OE 6 repo. This means that the semi working build is not 11211, but 10607.
Well this could explain "something". OSCam was "!always" the same but at Tvh we changed the descrambling (nobody said a word that this is not working - maybe nobody uses it).
test
pls test to install over the normal tvh - reboot
This is deactivating a descrambler - dvbcsa - module (like in 6.0) - maybe it works.
Well this could explain "something". OSCam was "!always" the same but at Tvh we changed the descrambling (nobody said a word that this is not working - maybe nobody uses it).test
pls test to install over the normal tvh - reboot
This is deactivating a descrambler - dvbcsa - module (like in 6.0) - maybe it works.
Could you provide this build for 4.0.9? I'm using the latest stable version of TvH.
Could you provide this build for 4.0.9?
done
Sadly not working at all, no playback. Log file: 2016-05-30 10:44:17.525 [ INFO] subscription: 0003: "epggrab" unsubscribing 2 - Pastebin.com
dvbcsa module has always been enabled for arm / WeTek Play. That's why your build isn't descrambling at all. Hmm, so it is more likely that it is a problem with oscam...
dvbcsa module has always been enabled for arm
no - oe tvh has -disable-dvbcsa
we had bumped csa some time back maybe this is the curlpit - do a build later
no - oe tvh has -disable-dvbcsa
we had bumped csa some time back maybe this is the curlpit - do a build later
I'm pretty sure that oe6 tvh had enabled dvbcsa for arm only. With oe7 dvbcsa is always enabled.
A build later of what? TvH or oscam?
I'm pretty sure that oe6 tvh had enabled dvbcsa for arm only
oh well you are right ;D
then I try to revert the csa changes maybe it helps 
I updated Tvheadend with the old dvbcsa - maybe this is the curlpit.
test (same name like the last one)
@chippotle
any news ?
Hi. On older oscam versions I have set oscam dvb api boxtype set to pc-nodmx and everything works great with vdr and tvh. With new versions of oscam (higher than 11077) for proper work with vdr I have to change boxtype in oscam on pc . Then Everything works good . If I have pc-nodmx it decode just one channel and then stop decoding after change channel. With TVH everything is good with boxtype pc-nodmx
Hi,
ich habe zwar Openelec aber hatte seit der Version 6.95.3 das gleiche Problem. Oscam ist r11211.
Der Tipp von zbigzbig20 hat mir aber Abhilfe geschafft. Habe in den oscam settings von pc auf pc-nodmx umgestellt und jetzt läuft es wieder. Bei den vorherigen Openelec Versionen hatte ichd as Problem nicht.
Vielen Dank nochmal für den Hinweis.
Hi Guys, I'm also experiencing this problem with the oscam version on LibreElec (generic build).
I have another oscam version r11209 on windows with exactly the same config that works without any problems but for some reason the libreelec version consistently fails to descramble.
If it helps my TVH version is 4.0.8
Any help much appreciated
I use vdr, not tvheadend. Tried libreelec 7.90 alpha. Oscam not descramble channels.
