Migrated From windows

Trunks81 · September 25, 2017 at 8:03 AM

Hi

I previous used windows and now installed libreelec because this software supports hd audio

No the software is unable to find the media disk from 3tb and iam a totally not into libre so no clue how to fix it.

Allready did some searching but noting that wil fix it

**DaVu** · September 25, 2017 at 3:34 PM Official Post

Is that an internal HDD or some USB-HDD?

Trunks81 · September 25, 2017 at 4:47 PM

Hi it is an internal disk

Blkid

/dev/sda1: LABEL="NieuwVolume" UUID="F49CBC1D9CBBD876" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="c664fb5b-a946-465c-8fb9-0ddcc633498f"

/dev/sdb1: LABEL="System" UUID="59C8-3B46" TYPE="vfat" PARTLABEL="primary" PARTUUID="c728b7e8-7ed3-4f79-9ff2-64126752ebcb"

/dev/sdb2: LABEL="Storage" UUID="a45680fb-4b70-4fa6-b40b-e92d5d97d688" TYPE="ext4" PARTLABEL="primary" PARTUUID="fe328895-c4fd-4d00-97aa-c40dfbbb5379"

/dev/loop0: TYPE="squashfs"

Mount

devtmpfs on /dev type devtmpfs (rw,relatime,size=3810164k,nr_inodes=952541,mode=755)

proc on /proc type proc (rw,relatime)

sysfs on /sys type sysfs (rw,relatime)

/dev/sdb1 on /flash type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro)

/dev/sdb2 on /storage type ext4 (rw,noatime,data=ordered)

/dev/loop0 on / type squashfs (ro,relatime)

tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)

devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)

tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)

tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)

cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/usr/lib/systemd/systemd-cgroups-agent,name=systemd)

cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)

cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)

cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)

cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)

cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)

cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)

cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)

mqueue on /dev/mqueue type mqueue (rw,relatime)

tmpfs on /var type tmpfs (rw,relatime)

debugfs on /sys/kernel/debug type debugfs (rw,relatime)

tmpfs on /tmp type tmpfs (rw,nosuid,nodev)

fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)

**chewitt** · September 25, 2017 at 5:10 PM Official Post

In 99/100 cases the failure is due to a lack of clean shutdown in Windows; Linux will not mount the "dirty" NFTS filesystem to prevent corruption. If you run "dmesg | paste" and share the URL we can see the mount failure in the system log and hopefully confirm.

Trunks81 · September 26, 2017 at 9:10 AM

Hi

I used an win 10 usb to check the disk after this LE found the disc,

Only big issue now is when playing an movie the first 10 seconds goes oke after this it freezes and every 30 seconds it plays one frame,

And also no sound over hdmi.. but still searching for that

**chewitt** · September 26, 2017 at 9:26 AM Official Post

No Kodi debug log = no problem

Trunks81 · September 26, 2017 at 10:05 AM

Hi Sorry about that

fjPg

Trunks81 · September 26, 2017 at 9:02 PM

Same issue also when playing file from usb stick .. also not playable

Edit Did an total new install on an other usb stick which did an low level format.

Even after the new install files dont play i see the first 5 seconds than it freezes and like so every minute it show a next frame

**milhouse** · September 27, 2017 at 3:09 PM

Quote from Trunks81

Hi Sorry about that

fjPg

Not a debug log.

Your audio configuration is totally messed up, fix that.

Trunks81 · September 27, 2017 at 11:10 PM

Hi

What is total messed up ? i tried diferrent things so.

Tought that file whas the debug log. going to search further for the debug log file

**milhouse** · September 27, 2017 at 11:43 PM

Based on your log it looks like your HDMI connection to the Marantz AVR has no audio channels:

Code

m_channels        : NULL

But aside from that, your log is full of Kodi Audio Engine errors.

There's something about your hardware setup/configuration that Kodi really, really, doesn't like.

Trunks81 · September 28, 2017 at 12:07 AM

Mayba that is also causing the video playback issues..

Dont get it its a total fresh install

Found the debug log now a way to download them

Edit i disabled the onboard soundcard because iam running an Xonar DX. that maybe why it says null audio channels.

Trunks81 · September 28, 2017 at 12:22 AM

Solved..

This is what by disabling the onboard card is also disabled the hdmi audio.

Bacause iam running the Xonar Dx. Strange that is still gives the option hdmi audio