Thanks, which client do I need to install and do I also need to install tvheadend service?
#1,325 Photo and all. Install TVHeadend Service as well.
You need to read quite a bit. I only just got familiar with TV Tuner /PVR by reading to get my head around how it works.
When I boot from USB is the pvr client expected to be preinstalled?
No.
Install from LE Repo. You must go to kszaq's version afl1 is away. Read page 1
For people saying SMB is working could you possibly mention what OS your server is running? Thanks.
My 1TB Drive is plugged into my router and files are shared wirelessly.
Probably not much use to you but Fing Screenshot.
Works perfect including SMB #3,801
For those interested, I uploaded a first preview 8.2 build with Nougat kernel: [Testing] LibreELEC 8.2 for S905/S905X
Excellent results. "SMB" Fixed all my issues from previous post. All pretty good with testing so far.
The only thing i noticed is on some of the live TV Streams on a couple of Greek Channels ,
Krypton seems to not pause and Buffer and then resume perfect Playback then pause buffer on the channels with slow servers at peak times.
Not an issue as these 2 channels just pause and buffer continuously using jarvis so not worth worrying about.
It's just that Krypton kind of freezes and resumes at a crawl or just freezes without a buffer notification or wheel.
All in all very good results.
Thank you for extensive report. I am now working on 8.2 build and I hope it is fixed then.
[Testing] LibreELEC 8.2 for S905/S905X Fixed SMB
I too use DVB-T in Australia (Perth) - quite a lot actually.
For me TvHeadend v4.0.9 & v4.2 works with both the tuner in the WeTek Play2 and the PS3 Dual DVB-T Tuner.
I bet you are in Victoria - where for some reason people have been having LibreELEC DVB-T issues.
Correct.
Even worse for me i get a Retransmission from Como Tower in Melbourne.
have access to one 7MHz DVB-T mux and it doesn't work with the driver we have.
Hopefully it is the Driver. afl1 is away so wait and see.
Thanks for the info wrxtasy
I thought i was the only one with issues in Victoria ,Melbourne.
Have you checked the bandwidth setting? I believe Australia uses a 7Mhz bandwidth.
I have access to one 7MHz DVB-T mux and it doesn't work with the driver we have.
T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy
ABC
T 226500000 7MHz ¾ NONE QAM64 8k 1/16 NONE
Seven
T 177500000 7MHz ¾ NONE QAM64 8k 1/16 NONE
Nine
T 191625000 7MHz ¾ NONE QAM64 8k 1/16 NONE
Ten
T 219500000 7MHz ¾ NONE QAM64 8k 1/16 NONE
SBS
T 184500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
C31
T 557625000 7MHz ¾ NONE QPSK 8k 1/16 NONECorrect. The table above is a Transmitter in Melbourne which i don't access as i get a Retransmission from the Muxes i
supplied #3,765 .
But yes 7Mhz is correct.
So the Driver must be an issue as i know the Muxes are in the Pre Defined Muxes as i saw them in the log.
Thank you for responses as i have given up for the time being. It drove me mad.
1. He asks if anyone's tried the box (post #73).
No response.
I responded 2 hours after he first posted.
Mini M8S Pro T95N Google Android 6.0 TV Box 2GB 8GB 4K Amlogic S905
No point asking members about any MiniM8sPro s905 or any MiniM8s on page #1 as these boxes are all different depending on the date purchased as to what the hell is inside the Generic plastic case or who on Flebay or scAmazon gets the box from. #79
Have any of you good people had experience of this little box?
Superview ® Mini M8S Pro T95N Google Android 6.0 TV Box 2GB 8GB 4K Amlogic S905 Quad Core with WiFi HDMI DLNAIt looks like it'll work.
I guarantee you it will not be an S905 Chip as advertised.
It will be a S905X Chip.
You better hope the Wifi Chip is not a 9082xs or SSV6051
If it is , NO WIFI.I've got the box, and tried one Libreelec build and found no wifi. It's working on Android. How do I confirm what chip it has?
Another member BUM STEERED by this Thread.
I'd like to stop this thread. If you want a hardware listing it should be in a maintained wiki page not a forum thread that very quickly becomes 20+ pages and hard to follow. I would also ask you to refrain from using the terms "to buy" and "not to buy" as forum rules ask you not to promote commercial products
Display MoreAnd next batch of the misleading Branding MXQ's or T95's or A95's or A95x's are not working as the previous batch.
Most of these names are not "BRANDS" but names.
Whatever Hardware they can get at that particular month for the "CHEAPEST" price is what you will get.
This includes remotes, wifi chips, heat sink, thermal pads, usb, ram, tf card port, boards etc .
It is laughable how they all claim to be "Manufacturers."
So my problem with this thread is we will have members giving certain named boxes the OK to run on LE when in fact that is not
100% guaranteed.
Plus we are not test pilots for these Chinese Sellers who can't even provide a working Android Version.
Lets all remember this LE forum is for those who want a challenge and are prepared to test and get a cheap small media box to work as best as possible. If you don't want the challenge BUY an OFFICIALLY supported device and move off.
If I'm Hijacking this thread, it's done to help members who stumbled here.
It would be great to have an option to insert or not insert signature when posting.
It would save a lot of space taken up by signatures inserted when they are not required.
Example being replying to help a member does not require my signature and so on.
I believe Signatures should be mandatory but an option to insert when posting.
With my NEXBOX S905 MXQ Pro 4K I tried :
gxbb_p201.
gxbb_p200_1G_100M_RealtekWiFi,
gxbb_p200_1G_mxq_pro_4k.dtb,gxbb_p200_1G_100M
Have you installed CPU-Z CPU identification tool in Android to see what Chip you REALLY have ??
I presume you have read
I'm assuming it's the same as many of the boxes already listed, just with a different branded box.
I guarantee you it will not be an S905 Chip as advertised.
It will be a S905X Chip.
You better hope the Wifi Chip is not a 9082xs or SSV6051
If it is , NO WIFI.
For clean installation LE Leia you can use service.tvheadend42-9.0.112d.zip.
Installed OK . Tried 4 reboots but error.
You have to verify preconfigured muxes.
I have spent a few hours in the last few days getting my head around how this works.
Lots of Google Searching. Went round in circles trying to find more details on the changes i have to make in verifying the Muxes.
I am in an area where the transmitter is a retransmission and the only details i can find so far are the one's below.
I know there are only six Muxes and i believe the preconfigured AU with 100 Muxes has the frequencies i am after BUT i believe they need to be configured even more in the settings for linux to convert into service.
I know that in the Background i see full signal during scanning so i know the channels are being found but no information.
In Australia it is DVB-T no DVB-T2
Service Network Freq(MHz) Channel Polarisation
ABC ABC 634.5 MHz 43 V
SBS SBS 613.5 MHz 40 V
HSV Seven 620.5 MHz 41 V
GTV Nine 641.5 MHz 44 V
ATV Ten 648.5 MHz 45 V
MGV Commtv 627.5 MHz 42 V
I will have to dig deeper and get more info outside of the frequencies.
For Tvheadend42 install pvr.hts-4.1.0.2.zip.
Installed pvr via zip but Services TVHeadend 4.2 not installing from LE repo Dependency not met. ?
Have any of you good people had experience of this little box?
Remove Link To SELLERS.
It looks like remote.conf from Android firmware doesn't work with amremote driver
Not a problem. One thing i must ask, If the correct remote.conf file is replaced to the root of the SD Card whilst using SD Card LE,
Will the correct remote be installed when installtointernal command to install to nand. ?
Unfortunately I cannot provide support for DVB driver
No problem. I saw the changelog and mentioned it. I have never gone down the TV / PVR options with Kodi.
I've gone in head first to learn how it works.
I don't have 4K , UHD, 3D, HDR , VP9 or whatever so i plunged into the K1 Pro for the Tuner.
Really good when i got some services working. Picture is better than the Android which has Audio/Video sync issues.
