Posts by kowalmisiek

    Hello CvH.

    I have a problem with the option: Use predictive tuning to speedup channel switches

    In general, the channels switch very quickly. However, there are 3 channels on which the switching is very slow. HBO 2 HD, HBO 3 HD, H2 HD. Do you have an idea what the cause is and can you do something about it?

    Do you mean EPG configuration files? If so, where to find them?

    Picons are showing me so they are well configured.

    For 2h, when I go home I turn off the "idle scan" and check the effects.

    In the log it seems to me that at 20:10 the movie stopped working and buffered again. In the log I noticed this error:

    1. 2017-11-02 20:10:17.033 [ ERROR] tsfix: transport stream H264, DTS discontinuity. DTS = 1827804, last = 926004
    2. 2017-11-02 20:10:17.036 [ ERROR] tsfix: transport stream MPEG2AUDIO, DTS discontinuity. DTS = 1801440, last = 892080
    3. 2017-11-02 20:10:17.036 [ ERROR] tsfix: transport stream MPEG2AUDIO, DTS discontinuity. DTS = 1801440, last = 892080

    This is not RPi0-3. I have a computer based on intel kay lake.

    Procesor Intel Pentium G4600

    gigabyte ga-z170x-gaming 7

    8GB ram

    geforce 1050

    DVBSKY 952

    I noticed that sometimes under windows (dvbviewer recorder) and kodi also such a problem appeared to me, but there the picture buffered practically immediately.I do not know what it could be. I prefer to use LibreELEC but it is annoying. I will also tell you that I used to have an enigma2 decoder and never had such problems with the same satellite installation.

    This is my log file Mobile File


    I have long had a problem with TVHeadend. The problem is that when I turn on a channel, it disappears after a while and needs to be buffered again. It takes a while and it makes me nervous.

    I have an HTPC with a DVBSKY 952 card

    I do not know what else I can give to help find the error? Maybe some logs?

    Satellite installation is diseqc 2/1 Hotbird 13E and Astra 19.2E

    Theoretically, I have everything set up well.


    Please help me.

    I made the file and added these entries to it:

    1. xrandr --newmode "3840x2160p60" 593.41 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync
    2. xrandr --addmode DP2 3840x2160p60
    3. xrandr --output DP2 --mode 3840x2160p60

    After restarting the computer, there is no picture on the TV.


    I would like to have the option to choose 3840x2160x50Hz and 3840x2160x60Hz.

    Thanks for your message.

    This is my HTPC

    Intel pentium G3250
    Gigabyte B85M-HD3
    4GB RAM
    Geforce 630 GT
    Dvbsky S952

    Libreelec 8.0.1

    I also purchased a geforce 1050 graphics card and it is also a problem. At 4k resolution and full hd.
    I have also checked also on the intel graphics card and similarly. It looks like you do not want to get along with TV with HTPC

    The old tv full hd works smoothly at 1920x1080 / 60Hz
    My TV is 120Hz.
    Maybe there is a problem here? The Libreelec has no 120Hz option. I have read that it should also support 24Hz, 50Hz, 60Hz.


    Since when I bought tv samsung 4k EU55KS7000 I still have trouble stucking movies. When playing movies or live TV, stuttering often occurs. When I changed the resolution to 1920x1080 25.02Hz the vibrations disappeared but the movie is blurring. Is there any cure for this?


    I want to buy Asrock J4205-ITX. I want to watch movies and 4K channels.
    How does Asrock J4205-ITX work in LibreELEC? Does it have sound or movie problems?
    Do satellite channels SD, 1080i and 4K work smoothly?

    I recently bought a geforce 1050 graphics card and found that the libreelec does not support it. I do not want to spend money anymore.

    Does anyone have such a motherboard and it works well on it's satellite TV?

    Nvidia is not supported for 4K video and stuttering video in 1920x1080. I think it remains for me nothing else. I have to give up LibreELEC :( Still 4K films left me but stuttering in Live TV and 1920x1080 do not give advice. :(


    This is my HTPC

    Intel pentium G3250
    Gigabyte B85M-HD3
    4GB RAM
    Geforce 1050
    Dvbsky S952

    Libreelec 8.0

    I bought a graphics card GeForce 1050 and I have a problem.

    During playback of movies and live TV is very often stutter image. It seems to me that there is a problem with integrated controller.

    It seems to me also that the image does not have a 60Hz.

    My TV is 4K. I checked with a resolution of 3840x2160 and 1920x1080. Changed too Hz refresh but still wrong.

    In the old graphics card GeForce 620 at 1920x1080 everything was fine.

    Another problem is the lack of support hardware graphics card for movies 4K. When I turn on the video 4K HEVC is a very big stutter .

    Is anyone working on this? I know that the graphics card GeForce 1050 quite fresh but is there any chance that these problems will be fixed soon? Because if not I'll have to upload windows + kodi. I really like LibreELEC and wanted me to stay with him.

    It can help my log. -

    Please reply support