Posts by Gallahad

the analog audio out is really spotty sometimes it works sometimes it doesnt(it solves itself after a reboot but this happens very rarely). When i was running LE 11 i didnt had this problem and when i tried using alsactl restore to re initialize things it gave this out put

alsactl: load_state:1689: Cannot open /var/lib/alsa/asound.state for reading: No such file or directory
alsa-lib /build/build.LibreELEC-H3.arm-11.0.6/build/alsa-lib-1.2.8/src/ucm/main.c:1541:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2
Found hardware: "simple-card" "" "" "" ""
Hardware is initialized using a generic method
alsa-lib /build/build.LibreELEC-H3.arm-11.0.6/build/alsa-lib-1.2.8/src/ucm/main.c:1541:(snd_use_case_mgr_open) error: failed to import hw:1 use case configuration -2
Found hardware: "H3_Audio_Codec" "" "" "" ""
Hardware is initialized using a generic method

i really need this as this is the only out i have (i cant use hdmi audio as my tv speakers dont work and it also doesnt have an audio out)

update: i tried again and this time i got stuck in the uboot the last line said "end kernel panic init not found" something like that. so what i did was insert another sd card with le and edit the extlinux.conf file of emmc install. after doing this booting back up it boots and the output resolutiin is of the tv but the video signal looks stretched (im using an hdmi monitor with 4:3 aspect ratio and the resolution 1280x1024) tried changing the resolution in kodi but that didnt help

Quote from chewitt

/flash/extlinux/extlinux.conf is not an equivalent to config.txt (RPi config commands won't work) but if you follow the instructions for Intel GPUs here Custom EDID [LibreELEC.wiki] the same process for forcing a specific edid.bin file (so the kernel drm framework always thinks an HDMI device is connected and powered) should work - Allwinner boards are also using the same kernel drm framework.

When i use this command on my allwinner H3 setup it does create a .bin file but it does not use that when booting. So when I boot with my tv off and turn the tv on after a couple of minutes I get blackscreen (the tv does detect the 1080p output)

you could the "share my libraries" in the upnp menu but this only work on local network (it works by streaming your media from one device to all the other LE devices)

Hi it's me again after updating to LE12 the H3 audi codec out doesn't work but it works when booting from sd card tried reinstalling didn't work

i had the same problem and then i saw chewitt's post and manually updated it and it booted just fine in LE 12 the problem im having is some of my addons are not comapatible other thn that everything works fine (some of the problems that i have been facing before is still there such as missing cpu frequency)

hey when im running the installation commands it shows that some of the packages are having conflicts with other packages . i asked help from chat gpt and did what it said and im still facing problems

this is the exact command that im having problem with apt-get install -y git make gcc g++ ...

hey do i need seperate ubuntu installation or can i use my existing installation in my pc

will try and thank you for the help

im not really good with linux, would you be able to guide me through it

also could my current settings be copied to the new os

modprobe: FATAL: Module sun8i_cpufreq not found in directory /lib/modules/6.1.74

this is the output that i get when using modprobe

when i go through the dmesg output it shows for all the cores that the cpu clock-frequency is missing and when i try to check cpu frequency with cpufreq it shows no such directory

i used the same with an allwinner android image and it works fine so can i like copy paste things from that image

https://paste.libreelec.tv/sweeping-marmoset.log here's the link

update, i found the problem i used FDTOVERLAY instead of FDTOVERLAYS, spdif out does show up but theres no audio through the spdif optical port

FYI, i have also tried to do the same with the build on the sd card that i had previously used for recovery purposes. and i got the same output

it looks like i cant attach the file . so here's the contents that i copied

LABEL LibreELEC
LINUX /KERNEL
FDT /sun8i-h3-orangepi-pc-plus.dtb
FDTOVERLAY /overlays/sun8i-h3-spdif.dtbo
APPEND boot=UUID=2601-4656 disk=UUID=c8d7999e-09ae-49aa-bf85-76c35602095c quiet console=ttyS0,115200 console=tty1

like i said in the title im facing problems with overlays. im using a tv box with allwinner h3 running opi pc plus image installed to the emmc. the overlay im trying to use is sun8i-h3-spdif.dtbo. i also intend to use the sun8i-h3-tve.dtbo overlay for cvbs out. what happens is when try to boot it shows the initialising procces and just straight up hangs by the line /run init. tried rebooting didnt help. so what i did was use an sd card booted with le and change the extlinux.conf file with stock one. any help is appreciated