New builds are up, just reboot your device to force an update check and then reboot again once it has finished downloading for it to be applied.
Changes:
Fixed wifi for users with qca9377 chipset
Fixed netflix addon
Added kodinerds repo (contains netflix repo)
Made addons folder browseable over the network
Posts by GDPR-2
-
-
GDPR-2 Will you add bluetooth?
It should already be there
-
Netflix offers one month free subscription, you can use it for debugging
Its okay, a friend offered theirs up and I noticed the problem immediately, I'm just doing some final testing before pushing a new build out.
-
thanks for that, installed netflix just to get the same problem as you. keeps freezing and rebooting after i try to play an episode
It would help if you had provided a copy of your kodi log
Nevertheless I have discovered the problem with the Netflix addon, it will be fixed in the next build. -
I don't have a Netflix account so I'm unable to debug that issue unless someone wishes to share their account with me to debug the problem.
Wifi has been fixed for some devices in the next build.
I appreciate people reporting bugs but I need a copy of your logs to look into them further. -
Nokogiri I see exactly, what you mean, I have pm'd you a link to a build to see if this fixes the issue, please let me know.
-
Nokogiri You shouldn't be having any issue as all the modules are symlinked to their old location, there was changes in 9.x by the LE team and keeping them at their old location breaks the build.
DS-1 Extract the img.gz and download rufus and burn the image to your USB drive with that as I've just tried it and had no issues, an easier option and the way I update is to just place the tar file in the Update folder on the Windows share and reboot the device.2re I have looked into this, disp_cap only displays what values the kernel is reporting and this is taken from the edid data your tv provides, the necessary kernel options are already enabled for 23/29hz @ 4k, all I can suggest is rebooting your tv/device and see if the option appears if your tv does indeed support these modes.
-
There's a different way to make it boot on a S905X box?
8.x Libreelec boots normally, while this one (copied on a microSD using Libreelec sd creator) makes hang the box on the S905X logo!Be sure to download and rename the correct dtb.img for your device and place it on your microSD.
-
Do Tuner definitions wetek play2 are incorporated?
The wetekdvb module is included on the latest build, I don't know if it works but you can test it and post your results.
-
New build has just been pushed, all new builds after v1.0.0 will now automatically update once you reboot your box after it has downloaded.
-
@routir I think you would be better to install Android and run it along side the Android version of Kodi if you require this
@Gendo Thank you for your pull request, I have merged it, I wasn't aware about the addons not being available
@ChimeyJimmey As above, a new build will be pushed later tonight that will auto update itself in the future and include Gendos patch for inputstream.adaptive, I also don't own an S912 device so I don't really wan't to put something out there that I can't personally debug and test, sorry.
-
Interesting "bug":
- On S905X box - inputstream adaptive suddenly disappeared and cannot be activated/installed manually. Hence - no amazon & netflix...
- On S905 box - no such issue.
Can you please post steps to reproduce this bug and I will look into it as it's an S905X box I use myself, thanks.
On another note, I will be pushing a more final build towards the end of the work that will auto update so people can stay on the very latest bleeding edge build if they so wish. -
Thanks for the feedback, I wasn't aware somebody had already made a Leia build, I can't speak for Gendo's build as I haven't looked at his source however I have merged most of kszaq's work into the master branch from scratch taking into account patches that have been superceeded and reworking older ones to make them compatible for Leia, I will push the source code later tonight I used to build this image.
-
LibreELEC 9.0 Alpha for Amlogic S905/S912 devices.
Read this first: [HOWTO + FAQ] Install community builds on S905/S905X/S912 device
Important notes:
- These are unofficial, community supported builds so please post all bugs/issues in this forum area only.
- These builds are highly experimental and based upon the LibreELEC master branch and as such should never be considered stable.
- I work on these builds in my free time. I also don't know a lot of things so please be kind and patient if you encounter any bugs.
- Bugs? Read this first: [READ FIRST] Reporting bugs
- if you choose a device tree with LIRC support, you have to configure your remote control from the scratch (amremote cannot work toghether with LIRC)
- I'd like to thank kszaq as without his work then none of this would be possible, device support for this build is based upon his 8.2 branch!
- I'd like to thank afl1 for adding DVB support to these builds and for all his contributions to the project.
- I'd like to thank johngalt for his work on improving the Nougat kernel and making HDR available!
- I'd like to thank GDPR-1 for keeping me going and encouraging this project.
Note on downloads:
- Odroid C2 is not supported, use the build by GDPR-1
- If you experience freezing then downgrade to kszaq's 8.2 -temp_sensor_disabled version
- If upgrading from 7.0/8.0 builds remember to update the device tree!
If you forgot to use a new device tree or used wrong one and your device doesn't boot:
- don't panic!
- if booting from SD/USB, simply connect SD/USB to your computer, download a proper device tree, rename it to dtb.img and place on SD/USB
- if booting from internal:
- Boot this build from SD card or USB with correct device tree.
- Login over SSH and execute dd if=/dev/zero of=/dev/dtb bs=256k count=1 then dd if=/flash/dtb.img of=/dev/dtb bs=256k
- Power off, remove SD/USB, boot from internal.
Downloads: here
Choose .img.gz file for burning to a new usb drive or SD card and choose .tar if you are upgrading
Device trees: here
Known issues and important notes:
- SAMBA/SMB/Shared folder issues? Read this blog post first
- Built-in DVB tuners may or may not work and supported only for "K" series devices. For "K" series I use driver from afl1 with some modifications, please do not report issues with the driver to him!
- 4K support is experimental.
- 3D and HDR are not supported, i.e. they might work but I don't provide support.
- CEC might not work when your box has incompatible u-boot or your TV is not that well supported by Amlogic low-level CEC driver.
-
kszaq please can you push the tag to github for 8.1.10-rc1 thanks
-
Both TX3 (S905) and TX3 Pro (S905X) work
-
Couldn't find the remote for the non-pro Tanix TX5, but I have added a few remote confs to this zip. One of them may work.
If people could post their remote.conf and brand of box I will add them to the zip.
For people installing this via TWRP. Here is the 2016-10-11 update zip.
TX3/TX5 remote.conf Zj3ZkTpN =)
-
I usually don't upload source code for devel builds as my workflow includes lots of rebasing. But you can always request the source: here is the source for the latest development build: 2016-10-11-devel
Thanks for this
