Seems to be cause edid.cpio contains newedid.bin parameter
thank you for all
Seems to be cause edid.cpio contains newedid.bin parameter
thank you for all
i followed manual guide
Custom EDID [LibreELEC.wiki] from point
Next a cpio archive file will be created which will be loaded at boot:
to create a new edid.cpio
but some commands give me error
at Search for “extlinux.conf” or “syslinux.cfg” and edit it. Only one of them is available.
seems that the parameter -w doesn't exist cause it ask to check the valid parameter for nano
I edited my edid file to drop 10 and 12 bit and avoid black screen issue with Intel graphic card and denon avr
see here for info:
Occasional Refresh Rate Change Problems
Original edid was created using getedid script, i edited edid file with 8 bit flag
And now what are the steps ? i suppose that i must edit also edid.cpio file and is not enough to overwrite edid.bin file in /storage/.config/firmware/edid
btw i found also this bug with avr
Occasional Refresh Rate Change Problems
(but in my case i get only black screen not unsupported signal)
edid sorry for my ot
I get it to work on my old 1080p plasma but no image on my brand new 4k qled (QE65Q9FN )
Any log or something I should get out of the system as I get ssh acccess but no picture after the uefi boot screen?
cause sometimes ago i also had coldboot problem a developer teach me to append to custom edid autostart also the resolution and refresh rate at autostart but i'm sorry i'm not able to tell you
so i have a string like that
BOOT_IMAGE=/KERNEL boot=LABEL=System disk=LABEL=Storage ssh quiet initrd=/edid.cpio drm_kms_helper.edid_firmware=HDMI-A-1:edid/edid.bin video=HDMI-A-1:1920x1080@50D
ah sorry i forgot to post what i use
software solution
Audio Profiles - Easy switch between different audio settings (that can also auto switch from avr mode to tv mode )
i toggle tv to avr via remote key mapping
so your avr is always on ? or you set action to harmony ?
Like: Tv series only audio tv..... avr switch standby
Like : film avr switch on
But how do you switch ? for audio i use
btw i forgot to say that i found this bug also on rpi forum
BUG: Black screen when returning after watching in 23.976hz.
I still get a black screen on switching. If I set the Kodi gui to 30hz there is no problem. This only seems to happen on 1920x1080. There is also no problem if the Kodi gui is set to 3840x2160@60hz .
Same (in my case) for my braswell and broadwell Nuc in combination with AVR
Someone on Kodi forum almost 18 months ago said that was an issue caused by AVR (onkyo or Denon) and I found other users with AVR and same issue (something about clock delay due AVR passthrough )
After many months of bad WAF (everytime a blackscreen =force reboot) i read on libreelec forum that a solution was to force gui to 30hz and now I found this thread with same issue and same solution works
So probably is the same bug ?
Semi ot
23.98 refresh rate solution is only for Gemini architecture or for all Intel architecture ?
I ask because me and many other users have this bug in combination with AVR
Only solution set Kodi GUI at 30hz
If I set 50, 59.94 or 60hz I get black screen switching back from 23.98
This problem occurs on chromebox with broadwell and on braswell
Yes please post a video,if you have time, cause i'm curious
In my case i have black screen (no i don't lost signal) after peter anvin et al boot message or kodi logo
I forced AVR Edid cause in xorg log there was a mention about hdmi lost signal /disconnected (not exact error but i don't rembember now)
lucky these problem with my avr happens only with kodi (tried a chromebox and nuc with braswell thinking about hardware issue)
23.98>50/60 refresh rate switch is another bug
Black screen on play when refresh rate switching is enabled
You are lucky because with my Denon avr (but other users with onkyo) have this problem also with Kodi 17
This problem happen less since I forced edid
And also me and other users have black screen when refresh rate changed on play/stop
This issue finally solved forcing GUI at 30hz.. , found it after almost year of pain just fews days ago
(and probably this solution solved also black screen at boot)
These issues was so frustrating and not WAF that I mapped a remote button for hardware reboot
Found this solution even if is for Raspberry
BUG: Black screen when returning after watching in 23.976hz.
unlucky after years problem still exist ![]()
Did you solve ?
So i read on kodi forum that There are other user with Black screen on play /stop
And also with marantz avr
Tried kernel 4.9.1 and problem is still there
Display More
hello forum,i recently switched from openelec to libreelec and i am very satisfied with my media center. but, there is a small but annoying thing i couldn't fix yet. sometimes i have some strange display flickering while playing a movie. it happens mostly at scenes with a lot of motion, but sometimes on slower ones, too. it's hard to describe, as english is not my native language, so i made a video with my phone and extracted a frame with the "flickering".
it looks like this, happens only for a fraction of a second. don't mind the borders, TV is 16:9, movie 21:9
the video files itself are not the culprit, they are playing on PC just fine. the flicker occurs random, never at the same time if i rewind the scene and only while playing a movie (not in menu). i changed from displayport to hdmi and switched the hdmi cable, but with no luck. maybe it's some sort of driver issue, back at openelec everything was fine - but i want to stay with libreelec
here my setup:
Libreelec on Intel NUC D54250WYKH2 (i5-4250U Haswell), with 2x8 GB RAM and 60 GB m.2 SSD. Movies are played via SMB from a NAS connected via gigabit ethernet, using up to 8GB of RAM as playback cache. the NUC is connected via HDMI to my Samsung J-Series UHD TV, running at 4K@30Hz. Problem occurs at 1920x1080, too.
Did You also try Mulhouse build ?
For video settings to get best video quality and performance refer to
Point 2 and below
Take note that some video settings was moved in other menù (You must search them)