Posts by MikeBuzz

Have had to downgrade to 8.2.3 as 8.2.5 was causing issue with sound breaking up

Quote from HiassofT

Thanks for the feedback!

After disabling Lirc in LE settings you have to reboot, then in-kernel decoding will be used (running Lirc disables that) and the remote should work again. Could you try that?

so long,

Hias

Works fine now after reboot

Quote from HiassofT

Yes, you are absolutely right, the "slice" DT overlay seems to be broken. I'll ping the

To get back IR on the Slice the following line in /flash/config.txt should work

Code

dtoverlay=gpio-ir,gpio_pin=37

This will use the more modern gpio-rc-recv driver which means you'll also be able to disable Lirc in LE settings.

so long,

Hias

This has fixed IR, you have to leave the setting enable in the settings as i tested disabling it and it stopped it working

http://ix.io/17pf

i am guessing this is the issue

003223.334: dtdebug: Opened overlay file 'overlays/slice.dtbo'
003225.094: brfs: File read: /mfs/sd/overlays/slice.dtbo
003238.793: dterror: can't find symbol 'cprman'
003238.805: Failed to resolve overlay 'slice'

http://ix.io/17p5

Slice 3, totally factory lircd configure, will upload the logs in next 5 mins

Lirc is enable in settings, but still does not work, this was working fine in the release 8.2.3

Quote from F1Fanb0y

I don't seem to have any problems with 8.2.4 but i have already turned off the RSS feed is yours switched on?

RPI3B+ freeze

Are you running CM1 or CM3 in your Slice?

Quote from popcornmix

MikeBuzz Can you test this firmware? Latest firmware with emmc clock change just reverted for external emmc platforms.

uc?id=1Jn9je-wtpSsa-fvU77f40EcyleKPoz5R&export=download

popcornmix

that version is working fine as well

LibreELEC:~ # vcgencmd version

Mar 23 2018 16:27:37

Copyright (c) 2012 Broadcom

version d92349b3d22c277e44d508a2aae6af2b1e5bb224 (clean) (release)

popcornmix

that version seems fine

LibreELEC:~ # vcgencmd version

Mar 16 2018 17:27:35

Copyright (c) 2012 Broadcom

version db815f3ae3dc88cf21fed2765f3b25d9d2bea67a (tainted) (release)

popcornmix

The firmware you suggested works fine

It seems it is the 8.2.4 firmware, boots works for a few mins then stops responding to any input, now back to 8.2.3 and working as it should

Hi Milhouse,

Mine is box default with no over clock, i will stick the 8.2.4 firmware files on now and let you know if get the same issue

I had auto updates enabled, on updating to 8.2.4 the system hangs, will not respond to any local input and also network fails to respond.

I have not had time to check the logs, but it could be do with the new RPI 3+ updates

Any one interested in a heat sink for the CM3?

Slice CM3 cooling mods - Hacks and Tweaks - FiveNinjas

Quote from chewitt

MikeBuzz, how?

Well i have no idea. i accidentally copied over the Slice instead of the Slice3 file over to the update folder, on the 1st reboot it extracted the files no problem on the reboot after the update i just got the normal rainbow splash which is kinda of expected as could not load the kernel.img, so i powered off and connected the usb mini to the pc, it detected the internal HDD no problems, then i connected the power and loaded up rpiboot, all i get is "Waiting for BCM283x" i can see no way past this and have no idea why it would of happened

I have killed my CM3, so waiting on a replacement

Quote from g7ruh

chewitt
in the latest build for CM3 posted here 7-95-1 Slice analog audio is not supported. There is no
ALSA: Default (snd_slice Analog) option shown in Settings/System/Audio

Are you planning to update the Index of /slice/ again or is the link above the correct one to use?

Where will I find a fix to test?

Thanks
Roger

Roger, what the file you have downloaded? is it the RPi2 version as i see no mention of Slice on that page

you can get the Slice3 build here

LibreELEC-Slice3.arm-7.95.1.tar