stops samba till next reboot
systemctl stop smbd
stop samba completely
systemctl mask smbd
reactivate samba again
systemctl unmask smbd
Posts by CvH
-
-
No proper HW
you need an Nvidia GPU, most have Intel only or like me AMD
-
you talking about a technotrend, right ?
yes, he did already drivers/modifications for other TT devices
-
It should work in theory, but no LE dev has the proper HW to test it at all. Afaik there are still problems with it.
-
mysql server is easily doable possible via Docker + Portainer (both at the LE repo via Linuxserver.io repo)
-
we could attempt some more dirty hacks
okay
for 4600 only atm (terratec has some additional problem it seems)1. update to the image from test, activate hauppauge addon (as the hacks are only there)
2. upload the dvb-demod-m88ds3103b firmware to Add a firmware to LibreELEC [LibreELEC.wiki] (how it works) AND rename it to dvb-demod-m88ds3103.fw
3. nano /storage/.config/modprobe.d/dvb.conf options m88ds3103 dyndbg=+pmf4. remove the 4600 stick, reboot
5. after reboot enter at ssh modprobe m88ds3103 dyndbg=pmf
6. attatch the 4600 stick again
7. dmesg | paste
-
maybe dvb-core could do the job ?
no idea and also no idea how I should test it
-
I hope that helps
said General Protection-Fault
Index of /test/tt-4600-new-rev/
for you both a new image with dynamic debug activated
currently not yet an idea how to activate the logging
MAYBE:
nano /storage/.config/modprobe.d/dvb.conf
options m88ds3103 dyndbg=+pmf
+ reboot + dmesg
-
no idea actually, did you tried to activate "use backend channel groups" at the pvr settings ?
-
closed - working add-on at the thread above
-
Yes indeed it failed. here is the output
could you
nano /storage/.config/modprobe.d/dvb.conf
Codeoptions tuner debug=1 options dvb-core frontend_debug=1 options dw2102 debug=1and reboot ? this "should" enable debugging
after reboot and dmesg | paste as usual
-
did you tried to reset/clear the pvr db (at the pvr settings) ?
it should and it does behave exactly the same as at windows
-
-
do I need to activate AddOn's or just update and go ?
LibreELEC-Generic.x86_64-9.0-devel-terratec-V1.img.gz
pls activate the hauppauge addon, its the easiest way to test this
-
can you do "the trick" for Terratec's too ?
what image (platform) do you need ?
-
find a solution
LibreELEC-RPi2.arm-9.0-latest-media_tree_V2.img.gz
could you try this ? Activate the hauppauge addon after updating.
its likely not working but we would do a step forward, dmesg | paste is needed
-
Is this how it should look like?
yes exactly, at least windows kodi looks the same
-
If tuner and demod are the same the boxes are practically the same (changes only the id).
no this isn't that true, you also need to know what usb bridge is used
