Posts by kodiuser1

Awesome, I can connect on my local network. AWESOME.

Is it possible to connect to a remote Libreelec???

That would be the icing on the cake.

If I restore from a backup will it overwrite my library and other addon settings?

Hi All,

I have a Beelink MIII II S905X running 7.0.3.012c 32bit. The remote does not work even a little bit. I was on build 7.0.3.009 64bit and it worked just fine.

Does anyone have a working remote.conf for this build they could share with me. Or please point me in the right direction.

Thanks

Hi there,

I have a MXQ Pro 4K box and i'm trying to run LE from the SD card. I'm using 7.2.008. Every time I push the reset button in for 10, it boots into Android Recovery. In there I can click reboot to bootloader but then the screen goes blank.

Anyone got any ideas to run from SD card??

Cheers.

AWESOME. Works perfect. THANKS SO MUCH.
[hr]
Is there an easy way to return the DNS to what it was prior? If you didn't make a not of what they were before you changed them?
[hr]
I did return the IP addressing back from manual to dhcp and that seemed to do the trick.

Quote from redger

Have you tried "manual" IP addressing ?

I have successfully set DNS, no problem, just needs manual IP address (which will be copied from the DHCP address initially allocated, then you modify it)

Please explain this for me if you could.

Hi all, I'm running @kazac build on my S905x box. I can't seem to find anyway to add a DNS setting in the box.
Is there any way or do I have to do it in my router?

Hi there,

I have a MXQ Metal cased box running LE. I can't seem to get the remote working at all rally, just a few buttons. I have tried 2 other remote files and they don't work either. It's funny I swear the remote used to work just fine without a remote.conf file added. I am using the LibreELEC-S805.HD18Q.arm-7.0.2.7 build.

Could anyone post a working remote file or point me in this thread to a working remote file.

Many thanks.

Thanks for your help.

Good to know. So if I install a 32 bit version on SD CARD S905x and create a backup, then I would be able to restore that on an S805 cpu without any issues?
Many thanks.

Hi guys, I just wanted to check that it is okay to create a backup on one device S805 and restore is to a different device S905x, without wrecking anything.
Regards.

Use the LE backup feature in LE settings.

Is it me or had anyone else noticed the sound through a TV being horrible on this build? 009 was perfect.
NEXBOX A5 S905X

What do you need from me, or do you know already?
[hr]
Is it me or had anyone else noticed the sound through a TV being horrible on this build? 009 was perfect.
NEXBOX A5 S905X

What do you need from me, or do you know already?

Seems as though my router was throwing me off. Wired connection not working but wifi is.
Sorted now. [emoji1]
[hr]
Seems as though my router was throwing me off. Wired connection not working but wifi is.
Sorted now. [emoji1]

Hi there,

I have build 7.0.2.009 installed and went to put that build on another NEXBOX A5. I did a install to NAND. I went to restore my data, using my addon and for the first time ever I am getting an error that is caused by LE I think.

Here is the logs: Dropbox - Link not found

I hope you guys can help

Quote from honolulu1

As I understand you are using this build (11) ? So you haven't used (9) and seen the problem I described? Because every single DTSHD-HR movie is doing this DTS core extraction and I want to be sure before updating because I would have to do all my configurations again which would take me hours.

Why can't you just use the LiBreELEC backup and restore function??
[hr]

Quote from honolulu1

As I understand you are using this build (11) ? So you haven't used (9) and seen the problem I described? Because every single DTSHD-HR movie is doing this DTS core extraction and I want to be sure before updating because I would have to do all my configurations again which would take me hours.

Why can't you just use the LiBreELEC backup and restore function??
[hr]
I don't quite understand the instructions. I want to go from 011 32 bit to 009 64 bit.
I don't have any USERDATA or addons installed.
011 is installed on NAND.
Can I just boot from sd card with 009 and then installtointernal??
[hr]
I don't quite understand the instructions. I want to go from 011 32 bit to 009 64 bit.
I don't have any USERDATA or addons installed.
011 is installed on NAND.
Can I just boot from sd card with 009 and then installtointernal??
[hr]
Why are my posts coming up twice??
[hr]
Why are my posts coming up twice??

Hi @kazaq,

I just upgraded to this build and is it me or does it seem way faster. Great work.

I did notice something not sure if anyone else has. I have a notification come up at startup which makes a noise. That noise is now about 2 octaves higher than it was before. Any ideas why this might be?

Regards

Nexbox A5 2gb/16gb

Quote from Virtex

I would like to give my contribution to the discussion helping other readers to install transmission daemon on LE for Amlogic s905X with LE 7.0.2.009

I have a T95X box. I previously installed a LE 7.0.2.006 downloaded from index - powered by h5ai v0.29.0 (https://larsjung.de/h5ai/) and I was able to install transmission daemon on standard repository.
To solve an issue with bluetooth I installed kszaq 7.0.2.009 build but transmission daemon wasn't in standard repos.
I tried downloading the transmission zip build from thoradia/7.0/S905/aarch64/service.transmission at master · thoradia/thoradia · GitHub but the zip file seems to be corrupted. Can't open it and can't install.

So I looked inside the old 7.0.2.006 build (mounted on my PC), and I found the add-on in /.kodi/addons/service.transmission
I copied via ssh the whole directory to the box running the new 7.0.2.009
Then I connected via ssh to the box and added the service to systemd, typing from shell:
# systemctl enable /storage/.kodi/addons/service.transmission/system.d/service.transmission.service

A message alerted me that the script is missing the [Install] section and some possible issues are listed. Don't care.
Rebooted the box, transmission daemon is there, working

Hope it helps
giuliano

Display More

giuliano will this Transmission addon enable me to watch acestreams? Acestreams are torrents in nature but I think plexus has something to do with it?

Regards.