Posts by Da Flex

Makes sense. Is your firmware up-to-date? Some PC have firmware for the graphics chip, which is HDMI-related.

Probably not enough processing power for Full HD:

https://www.chip.de/test/Medion-akoya-Mini-E1312-Netbook-Test_139958389.html

Try HD Ready.

It's a VC4 graphics driver option. It has a dependency, because codecs are higher level on the stack.

Try this:

Thread

[RPi5] How to set RGB Full in LE12?

Hi,

It's been a week now that I search the forum and the web for a solution to my problem. I have a new LG OLED TV and a new RPI5 on which I have installed LE12. I need to set it to full RGB in order to get the perfect image quality (on my old NUC i3 11 with LE10, I managed to have FULL RGB and I can compare). I have deactivated "limited" in kodi - system - display, I have tried "boot=UUID=2504-0815 disk=UUID=9f7b1397-4586-452d-a897-b3f9f95035f5 quiet console=ttyAMA10,115200 console=tty0…

agabrean

June 10, 2024 at 9:16 AM

I bet it's only the buttons with TV AND Kodi functions, and you don't have any trouble with the color buttons, right?

So TV has higher CEC priority at some Kodi states. If you really need a fix, ask the developer of CEC Adapter at Kodi forum.

Disable all screensaver-related settings at CEC adapter.

When I turn off the TV while Kodi still on, then CEC still works after turning on the TV again. Do you lose all CEC functions on that procedure, or only the customized buttons?

At CEC adapter settings: When the TV is switched off: Ignore.

Quote from olze

When i power off the rpi5 with the menu in LE, the TV powers off too but the AV receiver not.

Click at Settings -> System -> Input -> Peripherals -> CEC Adapter to setup the AVR behavior.

Thanks!

2024-06-12 00:00:54.214 T:850   warning <general>: CXRandR::Query - output eDP1 has no current mode, assuming disconnected

That could be similar to this HP ProDesk issue, so please read:

Thread

No audio on a mini PC

Hello,

New to the forums, hello again!

Right, so I've got a HP Prodesk 400 G4,

Intel i3 8100

UHD 630

I have a really weird issue, where the audio will come out of the inbuilt speaker, but will not route through to my TV.

I'm having to use a DP to HDMI adapter, which does route audio through on my main PC, just not with Libreelec for some reason.

I've done some digging, but cannot figure out how to get it to route the audio through, I've tried the EDID config, tried a patch I found on here, with…

boostedvtak

September 14, 2023 at 11:08 PM

• click at Settings -> System -> Input -> Peripherals -> CEC Adapter
• enable "Switch source to this device on startup"

On your TV RC switch to TV mode, and then back to AV mode. Does that make CEC work?

Quote from drnicolas

negative. Just plugged the new Rpi5 with the same cbale in another TV set

Negative what? Please start answering precisely, or we can't help you.

Try this on SSH (it's from popcornmix) :

systemctl stop kodi
modetest -M vc4 -w 32:"Broadcast RGB":1
systemctl start kodi

Side question: I can't find the RPi5 hardware revision code, which is part of the above logs:

RPi Hardware Revision: 0000b900

Current list of RPi hardware revision codes:

documentation/documentation/asciidoc/computers/raspberry-pi/revision-codes.adoc at develop · raspberrypi/documentation

The official documentation for Raspberry Pi computers and microcontrollers - raspberrypi/documentation

github.com

Quote from chewitt

Just compress the log in a zip file and upload it somewhere

Yeah, that's less time-consuming.

Thanks. I still would like to compere the logs. Maybe a different modifier is in use on DRM Prime:

2024-06-08 09:47:33.736 T:1007    debug <general>: SetHDR: setting connector colorspace to Default
2024-06-08 09:47:33.736 T:1007    debug <general>: CDRMPlane::SupportsFormatAndModifier - found plane format (P030) and modifier (BROADCOM_SAND128)