Posts by rosede

  • Something causing my TV to turn on by itself

    Quote from Da Flex
    • go to Settings -> System -> Input -> Peripherals -> CEC Adapter
    • disable "Put devices in standby mode when activating screensaver"
    • disable "Wake devices when deactivating the screensaver"
    • set "When the TV is switched off" to "Ignore"
    • set "Action when switching to another source" to "None"

    As I've stated several times in this post, these are the settings that I change as soon as I build a new PI.

    Just to verify that there wasn't anything else on the PI that can be causing this, or perhaps the update mucked something up, I rebuilt this PI from scratch with a fresh download of LibreELEC-RPi4.arm-10.0.1. So far all I've done is make the above changes in CEC and set the region/time information. The skin is default. Nothing else installed etc.....

    After rebuilding, I tested, and I am seeing the exact same thing. The only way to stop this, is to turn off CEC, which as I stated earlier, defeats the purpose of having CEC.

    This is an issue with CEC in this build. Please look into it.

    Thank you.

    Daryl

  • Something causing my TV to turn on by itself

    Yes, that is how I have my Pi setup. This is how I set it up when I first build a new PI.

    I always disable everything in CEC with the exception of keeping CEC enabled. Everything else gets disabled, or set to stop, or stop playback etc.. Identical to how you show.

    This just started when I upgraded to v10.0.0.1. All was working fine prior to the upgrade, so this tells me that the upgrade broke something and LE needs to fix it.

    Thank you.

    Daryl

  • Something causing my TV to turn on by itself

    With both PVR and screensaver disabled, this is what I get when the LE turns on the TV

    The only constant is

    Quote

    2022-01-04 09:28:47.664 T:829 DEBUG <general>: SetConfigurationFromLibCEC - settings updated by libCEC

    This seems to be the issue. At this moment, the only options that I have are to shut down the Pi when turning off the TV, or disable CEC, which defeats the purpose of having CEC.

    This seems to be an issue with LE. Please take a look at this and resolve.

    Thank you.

    Daryl

  • Something causing my TV to turn on by itself

    Quote from Da Flex

    It seems like the Kodi screensaver activates the TV over CEC.

    Test these workarounds:

    • Deactivate the Kodi screensaver.
    • Go into LE's input device settings, select "CEC Adapter", and make the RPi always send A/V signal over HDMI (and/or disable all TV wake-up calls).

    I don't see anything about sending A/V signals over HDMI. And all of the wake-up calls have been disabled, as a matter of fact, that is one of the first things taht I do when setting up a PI for this particular TV. When I first started using kodi years ago, this was an issue and I figured out that I needed to disable all wake-up calls to prevent this from happening.

    I also thought that it was the screensaver and disabled it as well, but the TV still turns on.

    Any additional thoughts?

    Daryl

    I disabled the screensaver and tested again. This time (and I've seen this before) I get a similar error when LE queries my local PVR.

    I've seen this before, and disabled the PVR, but the TV still turned on. However, I've never disabled the screensaver and PVR at the same time. I'll try that and see what happens.

    Daryl

  • Something causing my TV to turn on by itself

    After watching the kodi logs and turning the TV off and allowing it to turn back on, I finally determined that this is the moment that the TV turns on.

    Hopefully someone can figure why and resolve this for me.

    Thank you.

    Daryl

  • Logitech Harmony 650 not working with LE v9.97.1

    Okay. Doing a little digging and I discovered that either the RPi4 is not compatible with Sony Bravia, or Kodi v19. Either way, I got a message telling me that Bravia will enable once a compatible device is set up. This is perplexing, because the previous Pi's / kodi that I've used all worked. Why all of a sudden Kodi v19 / LE 9.97.1 is not working?

    Thanks

    Daryl

  • Logitech Harmony 650 not working with LE v9.97.1

    I just stood up a new installation on an RPi4 using LE v9.97.1. My TV is a Sony smart TV with CEC and I use a Logitech Harmony 650 remote. In the past, its just always worked. I have the Harmony configured for the Sony, and the pi had just always worked.

    I'm just wondering why the harmony remote is no longer working with the pi? I verified that the CEC plug-in is setup and enabled. Any other thoughts that I should look at?

    Thanks

    Daryl

    Its not just the Logitech that isn't working, I tried the regular Sony remote as well and its not working either. When I reboot the Pi, I see a message saying that the CEC is connected to the TV, but something just isn't working.

    Thanks

    Daryl

  • No video output

    Quote from Da Flex

    You can increase the log level (1 or 2 will be fine) by editing your existing advancedsettings.xml. It's worth to comment out all other tags inside <advancedsettings> for testing.

    Thinking similar to what you mentioned, I moved advancedsettings.xml to advancedsettings.xml_sav and sources.xml to sources.xml_sav, rebooted. I'm not sure if it was something in one of those files that was causing the video from being displayed, but after a couple of reboots, the video suddenly came back. I then moved both files back to their correct names, and all is good.

    Quote from lrusak

    Are you leaving the RPi on? does it work if you boot the RPi after turning the TV and receiver on?

    I did not try leaving the pi off turning of/on the TV and then booting the pi. If this happens again, I'll give that a try as well.

    Thanks

    Daryl

  • No video output

    I have an RPi4B running the LibreElec 10.0 beta, kodi v9.95.2 image. The reason why I am using the beta version is because I wasn't getting any video output using the LE v9.2.6, kodi v18.9. Someone on either this forum, or on kodi suggested that I use the beta and it worked, up until now.

    I now turn on the TV, and.......no video. I can tell there is a signal to the TV, but no video. I've tried everything that I can think of and have run out of idea's, so now I'm turning to the experts.

    Please find the error logs here. Pastebin logs

    Sorry, no debugging. I don't know how to turn on debug without going into the settings and enabling it.

    Thank you

    Daryl