Posts by WebEye

Hello all,

It's rather a Kodi Problem, but I've got no luck in the Kodi Forum, so maybe someone here can help me out:

I'don't know, if it's skin related, or it's Kodi itself.

Sometimes Kodi will access the filesystem where a specific movie or tv-show is stored, just while browsing movie/tv show database (database view).

I can't figured out, when this is happen, it seems to happen by accidient. But I think it's maybe in some relation with reading mediatags or something out of the files.

I turned every option in the skin settings to off, to prevent this behavier... No luck

Why this is so important:

My media files are stored on a NAS with sleeping hdds, so these hdds will wake up with this behavier.

My configuration

Kodi 19.3 with the standard Estuary skin

Only one share on hdd, which is always on

The database holds another few shares (different hdds, which are mainly asleep)

So my questions, can I somehow prevent this behavier? Can I, if necessaary, stop Kodi to read mediaflags / media info from files?

This happens only with Kodi19 and above....

Thanks for your support,

WebEye

Business trip is ok, but no toys? That's hard

Never mind, I will test it by my self this weekend!

Thanks again....

Thanks for support chewitt

Never thought ist's an Amlogic issue, I thought the LE team has disabled sysfs intentionally!

do you mean this ones: https://yadi.sk/d/dhepyyrcterlf

e.g. LibreELEC-AMLGX.aarch64-9.1-devel-20190608144541-a41fdf1-odroid-c2.img.gz ?

thanks again,

WebEye

PS: If you got a device with such an image, can you access "/sys/class/gpio"

This would save a lot of time for me!

Sry, hate bumping!

But seriously nobody?

I can't imagine nobody uses sysfs with Libreelec nor can explain, how to build libreelec to get this feature back!

It's no problem to build it myself, but I need hint, how to enable sysfs.

Meanwhile I tried CoreElec, they have still enabled sysfs, but I don't get warm with CoreElec and i love to have back my LibreElec

Thanks,

WebEye

Hi everybody,

this week I upgraded from LE 8.2.5 to LE 9.0.2

All seems to work fine, but now I realize, I've got no access to /sys/class/gpio/

I've got a second ir receiver connected via gpio and I have to set some gpio values.

Have I to compile LE with some different settings, or what is my fault?

Thanks for support,

WebEye

Hello everybody,

yesterday I upgraded fom LE 8.2.5 to LE 9.0.2.

My XBox-One IR works with my old ir-keytable config and out of the box as well!

But, what would happen, if everything works proper, after an upgrade?

So I realized, if I press a button often a little faster, some click events are skipped, or nothing happens anymore till I press another button!

So I played a little with some ir-keytable settings and found these ones for acceptable:

ir-keytable -D 200 -P 120
ir-ctl -t 20000

But these are not perfect compared with LE 8.2.5, so maybe someone has found out some nicer settings for this remote.

Thanks for support,

WebEye

PS: Great work with LE 9

Quote from gohakn

After that the Remote Protocol is changed from rc-6 to nec and everything works fine.

But after a reboot of the box i have to execute this three commands again to change the Protocol back to NEC and the delay time etc...

Hoy can I permanently "set" the Protocol from "rc-6" to "nec"??

Thank you....

you can add the lines to your autostart.sh stored in /storage/.config

remember to make this file executeable

Greets,

WebEye

works like a charm...

Thank you very much!!!

Maybe you can update the addon repository to deliver these new build!

Thanks,

WebEye

Thanks vpeter,

this works on my rp3; I've to do some testings with this.

But, can you do me a favour? This RP3 is just for testings, my main device is an Odroid C, so could you maybe do a rebuild for the arch64 platform too?

Thanks,

WebEye

Hi vpeter,

thanks for that, but I'm not authorize to open this part of the forum!

Maybe you can repost the solution here?

Thanks,

WebEye

Ssome news about this?

I saw this thread in Kodi Forums, but there seems to be no conclusion!

today I made a fresh installation on a rp3+, but still the installation of scummvm seems a little buggy.

So, when it's installed, it crashes...

And i don' know event where to put these .scummvm files

Thanks for advise,

WebEye

Could you try change the kodi database to local instead of mysql?

I had a similar problem with mysql, it was very laggy, the only solution for me was to replace mysql with mariadb....

Hello,

since LE 8.2, I had no more issues with my remote (using ir-keytable)!

Maybe you got another issue!

I don't know, how to compile LE on a Windows machine, maybe you should setup a virtual machine with some linux....

Good luck,

WebEye

Sadly no one?!

But I've got a walkaround solution; I set the output configuration from "optimized" to "best match". Now the clicking noise is gone, at least very quiet...

I think "best match" is not a worse setting, than "optimized", maybe someone has another clue and why this is happened at all.

Thanks,

WebEye

Hey All,
first of all, i havn't change anything on my audio settings or setup.

Since a few days I got clicking noise, when changing audio input codec,

eg when I listen to a audio playlist and the next song has another codec then the last one (MP3 --> AAC, or something)

I got this also when audio device get active/off

The most bothering one is, when I watch TV via DVB-T2 the tv-show changed and got another codec....

My setup:

odroid C2 via hdmi to Kenwood receiver

But I don't think, it's the hardware, as I said, it's since a few days, my first thought was, a related addon or something was updated, but I saw nothing

Can anybody help me, at the moment it's very annoying....

Thanks,

WebEye

Thanks for advice...

They wrote, this EDIMAX device has a good reception, but probably you're right....

WebEye

found EDIMAX EW-7811UN Wireless USB Adapter, 150 Mbit/s, IEEE802.11b/g/n on amazon!

Any doubt with libreelec?

Hi,

simple question:

Recommend WIFI USB Stick for Raspberry 1 B+

Can I do something wrong?

Thanks,

WebEye