Mount error on reboot

Tuuvian · August 23, 2017 at 1:41 PM

*** Error in mount_storage:mount_common. Could not mount /dev/data ***

### Starting debugging shell...type exit to quit ###

sh: can't access tty: job control turned off

What are my options if any to avoid full reinstall?

Thanks.

**Klojum** · August 23, 2017 at 4:37 PM Official Post

No details at all. No hardware, no version, no build number, also no cold beers on a 26+ Celsius day...

Tuuvian · August 23, 2017 at 5:32 PM

I know 😕. It happen on the way out to work so was brief. Pi3 as to version it is the latest non-bete release. Think that will make it 8.3 but cannot get into the system to check. Thanks.

**Klojum** · August 23, 2017 at 5:42 PM Official Post

You could start up a Linux machine (Ubuntu Live via USB), plug in the microSD card, and try to copy your storage data for safekeeping.

Tuuvian · August 23, 2017 at 6:20 PM

I have what I believe to be a recent full backup as well as data files backups. Do I take then that there is no magic bullet sort of thing to repair the situation say by inserting the card on my windows pc and performing any procedures that will need to be done? Thanks.

Mario77 · August 26, 2017 at 2:14 AM

This happened also to me while I was trying to boot from a hdd connected to my Rpi2..I have a partition named "STORAGE" formatted to ext4....cmd line is "boot=/dev/mmcblk0p1 disk=LABEL=STORAGE quiet"

Got a similar error cannot find storage and sh: can't access tty: job control turned off

Solved...problem was I had the old sd storage still mounted in samba.config...so ended up with a conflict...renamed the new storage partition from storage to storagehdd...changed cmdline and all booted fine to new location

Mount error on reboot

Similar Threads

[S812] MIII Plus 2Gb\16Gb eMMC

[S812] OTT M8S 2G RAM 8G ROM BCM4335 WIFI

[S905X] Update from 7.x 64bit to 8.x 32bit ends in mount error