SMB share

johnyu1969 · August 13, 2017 at 4:00 PM

I have a BT smart hub and have plugged a USB 3 portable hard drive to it.

I have advanced settings set as:

buffermode 0

memorysize 278921216

readfactor 20

This works perfectly with internet streams but doesn't buffer the shared usb drive at all. Unfortunately, I have no way of changing to NFS shares and the cifs share doesn't return anything.

Any ideas how to get SMB shares to buffer?

**Iridium** · August 13, 2017 at 5:53 PM Official Post

I think you need buffermode 1 See Video Cache

johnyu1969 · August 14, 2017 at 6:10 PM

Tried and failed - just freezes and dies trying to play 720p and above from the networked usb drive over wifi. Going to have to give up on it and just put it on a usb stick straight to the box.

**Iridium** · August 14, 2017 at 6:27 PM Official Post

Wifi is a real PITA. 144Mbps was no good, even with an extender, ditto 300Mbps. I got round it by using a 1Gb home plug but that required dedicated sockets (to reduce signal noise). Eventually I bought a 5ghz wifi antenna and I haven't had any problems since - yet to try it on DTS-MA 7ch but it should be fine as I already get 6.3MB/s off of the internet (Which is my max download speed).

I don't know what your hardware is, or your location of the hub from your LE box but if 5Ghz is available, I'd give that a go.

SMB share

Similar Threads

RetroELEC Kodi+Wayland+Emulationstation+RetroArch (x86/XU4/RPi)

Lost Samba access?