Hello,
Hello,
My sickrage has stopped working and i can not start it anymore.
After a new and clean installation of a libreelec v8, everything was working f,ne until i realized sickrage did not make unrar operation for a downloaded file. Then i tried to install unrar tool for kodi and i did.
After that i was able to log in webui. But sometime later i realized that sickrage does not respond and start anymore. I'm not sure that what may cause this issue.
I tried to uninstall and install sickrage again, but no success..
systemclt status service.sickrage
Code
service.sickrage.service - SickRage
Loaded: loaded (/storage/.kodi/addons/service.sickrage/system.d/service.sickrage.service; enabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Tue 2017-08-01 23:45:23 +03; 7min ago
Docs: https://sickrage.github.io/
Process: 691 ExecStart=/bin/sh /storage/.kodi/addons/service.sickrage/bin/sickrage.start (code=exited, status=1/FAILURE)
Main PID: 691 (code=exited, status=1/FAILURE)Aug 01 23:45:23 LibreELEC systemd[1]: service.sickrage.service: Unit entered failed state.
Aug 01 23:45:23 LibreELEC systemd[1]: service.sickrage.service: Failed with result 'exit-code'.
Aug 01 23:45:23 LibreELEC systemd[1]: service.sickrage.service: Service hold-off time over, scheduling restart.
Aug 01 23:45:23 LibreELEC systemd[1]: Stopped SickRage.
Aug 01 23:45:23 LibreELEC systemd[1]: service.sickrage.service: Start request repeated too quickly.
Aug 01 23:45:23 LibreELEC systemd[1]: Failed to start SickRage.
Aug 01 23:45:23 LibreELEC systemd[1]: service.sickrage.service: Unit entered failed state.
Aug 01 23:45:23 LibreELEC systemd[1]: service.sickrage.service: Failed with result 'exit-code'.When i checked journal during the start, i see below lines. But i still can not find the reason why sickrage does not start.
Any help will be appreciated.
Code
Aug 01 23:45:22 LibreELEC kernel: Bluetooth: HCI UART protocol H4 registered
Aug 01 23:45:22 LibreELEC kernel: Bluetooth: HCI UART protocol Three-wire (H5) registered
Aug 01 23:45:22 LibreELEC kernel: Bluetooth: HCI UART protocol Broadcom registered
Aug 01 23:45:22 LibreELEC rpi-btuart[364]: bcm43xx_init
Aug 01 23:45:22 LibreELEC rpi-btuart[364]: Flash firmware /etc/firmware/brcm/BCM43430A1.hcd
Aug 01 23:45:22 LibreELEC rpi-btuart[364]: Set Controller UART speed to 921600 bit/s
Aug 01 23:45:22 LibreELEC rpi-btuart[364]: Device setup complete
Aug 01 23:45:22 LibreELEC systemd[1]: Reached target Bluetooth.
Aug 01 23:45:22 LibreELEC ntfs-3g[702]: Version 2016.2.22 external FUSE 29
Aug 01 23:45:22 LibreELEC ntfs-3g[702]: Mounted /dev/sda1 (Read-Write, label "DATA", NTFS 3.1)
Aug 01 23:45:22 LibreELEC ntfs-3g[702]: Cmdline options: big_writes,fmask=0133,uid=0,gid=0,utf8
Aug 01 23:45:22 LibreELEC ntfs-3g[702]: Mount options: utf8,allow_other,nonempty,relatime,default_permissions,fsname=/dev/sda1,blkdev,blksize=4096
Aug 01 23:45:22 LibreELEC ntfs-3g[702]: Global ownership and permissions enforced, configuration type 7
Aug 01 23:45:22 LibreELEC udevil[635]: Mounted /dev/sda1 at /media/DATA
Aug 01 23:45:22 LibreELEC systemd[1]: Stopping Samba SMB Daemon...
Aug 01 23:45:22 LibreELEC systemd[1]: Stopped Samba SMB Daemon.
Aug 01 23:45:22 LibreELEC systemd[1]: Starting Samba SMB Daemon...
Aug 01 23:45:22 LibreELEC smbd[720]: [2017/08/01 23:45:22.913622, 0] /home/chewitt/LibreELEC.80-images/build.LibreELEC-RPi2.arm-8.0.2/samba-3.6.25/source3/smbd/server.c:1130(smbd_main)
Aug 01 23:45:22 LibreELEC smbd[720]: standard input is not a socket, assuming -D option
Aug 01 23:45:22 LibreELEC systemd[1]: Started Samba SMB Daemon.
Aug 01 23:45:22 LibreELEC systemd[1]: Started Udevil mount service.
Aug 01 23:45:23 LibreELEC sh[691]: Traceback (most recent call last):
Aug 01 23:45:23 LibreELEC sh[691]: File "/storage/.kodi/addons/service.sickrage/SickRage/SickBeard.py", line 66, in
Aug 01 23:45:23 LibreELEC sh[691]: import sickbeard
Aug 01 23:45:23 LibreELEC sh[691]: File "/storage/.kodi/addons/service.sickrage/SickRage/sickbeard/init.py", line 33, in
Aug 01 23:45:23 LibreELEC sh[691]: import rarfile
Aug 01 23:45:23 LibreELEC sh[691]: File "/storage/.kodi/addons/service.sickrage/SickRage/lib/rarfile/init.py", line 2952, in
Aug 01 23:45:23 LibreELEC sh[691]: _check_unrar_tool()
Aug 01 23:45:23 LibreELEC sh[691]: File "/storage/.kodi/addons/service.sickrage/SickRage/lib/rarfile/init.py", line 2931, in _check_unrar_tool
Aug 01 23:45:23 LibreELEC sh[691]: custom_check([ORIG_UNRAR_TOOL], True)
Aug 01 23:45:23 LibreELEC sh[691]: File "/storage/.kodi/addons/service.sickrage/SickRage/lib/rarfile/init.py", line 2823, in custom_check
Aug 01 23:45:23 LibreELEC sh[691]: p = custom_popen(cmd)
Aug 01 23:45:23 LibreELEC sh[691]: File "/storage/.kodi/addons/service.sickrage/SickRage/lib/rarfile/init.py", line 2813, in custom_popen
Aug 01 23:45:23 LibreELEC sh[691]: creationflags=creationflags)
Aug 01 23:45:23 LibreELEC sh[691]: File "/usr/lib/python2.7/subprocess.py", line 390, in init
Aug 01 23:45:23 LibreELEC sh[691]: File "/usr/lib/python2.7/subprocess.py", line 1024, in _execute_child
Aug 01 23:45:23 LibreELEC sh[691]: OSError: [Errno 8] Exec format error
Aug 01 23:45:23 LibreELEC systemd[1]: service.sickrage.service: Main process exited, code=exited, status=1/FAILURE
Aug 01 23:45:23 LibreELEC systemd[1]: service.sickrage.service: Unit entered failed state.
Aug 01 23:45:23 LibreELEC systemd[1]: service.sickrage.service: Failed with result 'exit-code'.
Aug 01 23:45:23 LibreELEC sshd[686]: Accepted password for root from 192.168.1.29 port 50811 ssh2
Aug 01 23:45:23 LibreELEC systemd[1]: service.sickrage.service: Service hold-off time over, scheduling restart.
Aug 01 23:45:23 LibreELEC systemd[1]: Stopped SickRage.
Aug 01 23:45:23 LibreELEC systemd[1]: service.sickrage.service: Start request repeated too quickly.
Aug 01 23:45:23 LibreELEC systemd[1]: Failed to start SickRage.
Aug 01 23:45:23 LibreELEC systemd[1]: service.sickrage.service: Unit entered failed state.
Aug 01 23:45:23 LibreELEC systemd[1]: service.sickrage.service: Failed with result 'exit-code'.
