Here is a dirt cheap DVB-C/T2 stick that actually works (hopefully) perfect at linux.
The stick is around 6£ and 12€ - so probably the cheapest stick at the market that didn't has to be shipped from china (and even then its damn cheap).
The linux drivers are rather new and thankfully provided by trsqr .
If you like to test this stick I made some image (currently only RPi2/3) - other images are currently building/testing,
Hmm - just getting FAILs when I add UK Crystal Palace muxes manually. May be something I'm doing wrong (I've swapped out a uSD card in my Pi 3 for the TV Headend + Jessie Lite + XBox One custom built drivers version - so the hardware set-up works)
It's late and I'm tired though - so I've probably made a stupid mistake...
just getting FAILs when I add UK Crystal Palace muxes manually
yes already seen that behaviour for others too - no idea why this happens
try 1.1 from here Index of /Test/xbox/
this is 100% the tree from trsqr so it should work - if not then it is a LE problem we have to find 
Will support for these make its way into the Amlogic builds? I've got one of these dongles sitting in my drawer, would be cool if I could put it to use.
Will support for these make its way into the Amlogic builds?
yes very likely, I currently try to make it work at a single platform to reduce useless double efforts
yes already seen that behaviour for others too - no idea why this happens
try 1.1 from here Index of /Test/xbox/
this is 100% the tree from trsqr so it should work - if not then it is a LE problem we have to find
Sadly no change with 1.1. Still all Crystal Palace muxes fail.
Swapped back to my self-build Jessie Lite + TV Headend build and all working (no hardware changes)
My working TV Headend build is 4.2.3-19~g490b6f2
The TV Headend build I installed under your LE builds is build 4.2.2-75
Just in case there are any differences? ISTR there was a PLP issue - but wasn't sure if that was driver or TVH related?
dmesg | grep dvb seems pretty much identical for both (other than a kernel tainted warning in LibreElec)
ISTR there was a PLP issue - but wasn't sure if that was driver or TVH related?
the same complete driver that works well at raspbian didn't works at LE (at the same kernel) - looks like we killed it somehow due our kernel.conf
sadly it looks like it should work so searching for bugs is a bit difficult for me as i have zero reception 
(working at an solution to have at least something that indicates if a signal is received)
-edit-
okay I have now a reception and the sticks works at raspbian like a charm - now Its time to fix it for LE 
LibreELEC-RPi2.arm-8.1-xbox-dvb-driver-mb-1.2.img.gz
looks now working for me (underlying bug still not found but at least something)
Working for me too. Thanks for doing this CvH
is there anyway to make this drivers available on media_build so that ksaq's images also support it?
so that ksaq's images also support it?
yea work in progress, as soon i found the remaining "bug" I send a patch to kszaq/milhouse ...
thanks for the help
Read this thread and direct ordered the Tuner.
I installed the above build, and the tuner is recognised.
But I keep getting lot's of continuty errors and transport errors.
Everything works oke without errors with Anysee E30 and Cinergy tuners.
All on cable.
Is there anything I can adjust to get rid of these errors?
yea work in progress, as soon i found the remaining "bug" I send a patch to kszaq/milhouse ...
Any news my friend?
Not yet due work load. Aiming for next week.
Fu up my bisect of the problem and have to start from scratch again. Needed a week of cool down 
I got one of these to play with and it works a dream on a RPi3, however it cannot be found on a cubox-i4. I'm guessing this is because the drivers haven't yet made it to the IMX6 (or are not available) yet. Am I correct? If not I'll need to dig deeper.
