Hi!
I have a hp mini 110 148a with libreelec 8.0.2
I need to work with the laptop as stand alone player but also connect to the TV using VGA cable.
I have 3 modes
-LVDS1 Works ok but not is the desired behaviour, I need VGA output.
-Default. LVDS and VGA works at de same time but VGA output show the entire window resized in a small frame.
-VGA1. When I change to this mode, the 2 outputs (VGA and laptop) goes to black, I only see the pointer on the VGA. So I do the following
- I click on left and press enter to accept the new configuration
- reboot
- After reboot, I see the window cropped (I not see en entire window, only a portion)
- If I select "blank other displays" and reboot the system again I see the VGA at full screen
xrandr give me this values connected to one VGA external monitor:
Code
Screen 0: minimum 8 x 8, current 1280 x 1024, maximum 32767 x 32767
LVDS1 connected primary 1024x600+0+0 (normal left inverted right x axis y axis) 220mm x 130mm
1024x600 60.00*+
800x600 60.32 56.25
640x480 59.94
512x300 60.00
VGA1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 380mm x 300mm
1280x1024 60.02*+ 75.02
1152x864 75.00
1024x768 75.03 72.00 70.07 60.00
800x600 72.19 75.00 60.32 56.25
640x480 75.00 72.81 59.94
720x400 70.08
VIRTUAL1 disconnected (normal left inverted right x axis y axis)Also mote that fn+f4 key that I assume that is used to change the output on windows, not works.
My questions are.
- How can I get proper logs to get more detailed information? specially to understand what happens when I select "VGA" and the screen goes to black.
- How can I configure the fn+f4 button?
- It's possible configure the "default" configuration and see the laptop and VGA at full screen at the same time?
