I have an issue with my NUC6CAYH (Apollo Lake). LE 8.0.2, latest BIOS and LSPCon 1.6.6 firmware. Audio is being decoded (HDMI) to my LG TV (no bitstream).
Under Audio Settings I see the device setup as LG TV on DisplayPort 0. All is good.
If I turn off the TV and turn it back on it now shows LG TV on HDMI 0. At this point my audio no longer works, need to reboot.
On the Kodi forum it was recommended to set my EDID. I tried this both the manual way and getedid script. Both seem to work "a bit", meaning a give the TV a toggle or two and see it stays as DisplayPort. But after several hours it will still revert back to HDMI, requiring a reboot.
Not sure this is a Kodi, LE or Linux bug at this point. I know the Apollo has a number of HDMI/audio issues but I thought they were all around bitstreaming.
The Kodi log doesn't show much, no errors. Devices are discovered the same:
03:16:56.328 T:140673106503808 NOTICE: Device 4
03:16:56.328 T:140673106503808 NOTICE: m_deviceName : hdmi:CARD=PCH,DEV=0
03:16:56.328 T:140673106503808 NOTICE: m_displayName : HDA Intel PCH
03:16:56.328 T:140673106503808 NOTICE: m_displayNameExtra: GSM LG TV on DisplayPort #0
03:16:56.328 T:140673106503808 NOTICE: m_deviceType : AE_DEVTYPE_HDMI
03:16:56.328 T:140673106503808 NOTICE: m_channels : FL,FR,LFE,FC,BC,BL,BR,FLOC,FROC,BLOC,BROC,TFC,TC,TFL,TFR,UNKNOWN1
03:16:56.328 T:140673106503808 NOTICE: m_sampleRates : 32000,44100,48000
03:16:56.328 T:140673106503808 NOTICE: m_dataFormats : AE_FMT_RAW,AE_FMT_S32NE,AE_FMT_S16NE,AE_FMT_S16LE,AE_FMT_RAW
03:16:56.328 T:140673106503808 NOTICE: m_streamTypes : STREAM_TYPE_AC3,STREAM_TYPE_DTSHD,STREAM_TYPE_DTSHD_CORE,STREAM_TYPE_DTS_1024,STREAM_TYPE_DTS_2048,STREAM_TYPE_DTS_512,STREAM_TYPE_EAC3,STREAM_TYPE_TRUEHD
10:20:11.694 T:140672996734720 NOTICE: Device 4
10:20:11.694 T:140672996734720 NOTICE: m_deviceName : hdmi:CARD=PCH,DEV=0
10:20:11.694 T:140672996734720 NOTICE: m_displayName : HDA Intel PCH
10:20:11.695 T:140672996734720 NOTICE: m_displayNameExtra: GSM LG TV on HDMI #0
10:20:11.695 T:140672996734720 NOTICE: m_deviceType : AE_DEVTYPE_HDMI
10:20:11.695 T:140672996734720 NOTICE: m_channels : FL,FR,LFE,FC,BC,BL,BR,FLOC,FROC,BLOC,BROC,TFC,TC,TFL,TFR,UNKNOWN1
10:20:11.695 T:140672996734720 NOTICE: m_sampleRates : 32000,44100,48000
10:20:11.695 T:140672996734720 NOTICE: m_dataFormats : AE_FMT_RAW,AE_FMT_S32NE,AE_FMT_S16NE,AE_FMT_S16LE,AE_FMT_RAW
10:20:11.695 T:140672996734720 NOTICE: m_streamTypes : STREAM_TYPE_AC3,STREAM_TYPE_DTSHD,STREAM_TYPE_DTSHD_CORE,STREAM_TYPE_DTS_1024,STREAM_TYPE_DTS_2048,STREAM_TYPE_DTS_512,STREAM_TYPE_EAC3,STREAM_TYPE_TRUEHD
EDID seems to load ok (from startup log):
[ 0.000000] Kernel command line: root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1 BOOT_IMAGE=/KERNEL boot=LABEL=System disk=LABEL=Storage quiet initrd=/edid.cpio drm_kms_helper.edid_firmware=DP-1:edid/edid.bin video=DP-1:D
[ 2.173297] [drm] Got external EDID base block and 1 extension from "edid/edid.bin" for connector "DP-1"
After several hours when I turn the TV on and check settings it's still DisplayPort but as soon as I try to play TV (no audio) I get:
18:59:16.862 T:140269547980544 NOTICE: Found 2 Lists of Devices
18:59:16.862 T:140269547980544 NOTICE: Enumerated ALSA devices:and then the device shows up as HDMI again.
