Tried to get son benchmarks of my sdcard, it seems that the sdbench script gets some kind of errors:
Code
CONFIG:
CLOCK : 100.000 MHz
CORE : 500 MHz, turbo=1
DATA : 512 MB, /storage/test.dat
HDPARM:
======
Timing O_DIRECT disk reads: 124 MB in 3.05 seconds = 40.72 MB/sec
Timing O_DIRECT disk reads: 124 MB in 3.03 seconds = 40.87 MB/sec
Timing O_DIRECT disk reads: 124 MB in 3.02 seconds = 41.03 MB/sec
WRITE:
=====
awk: cmd. line:1: Division by zero
536870912 bytes (512.0MB) copied, 98.600303 seconds, 5.2MB/s
awk: cmd. line:1: Division by zero
536870912 bytes (512.0MB) copied, 71.782989 seconds, 7.1MB/s
awk: cmd. line:1: Division by zero
536870912 bytes (512.0MB) copied, 62.256726 seconds, 8.2MB/s
READ:
====
awk: cmd. line:1: Division by zero
536870912 bytes (512.0MB) copied, 14.029445 seconds, 36.5MB/s
awk: cmd. line:1: Division by zero
536870912 bytes (512.0MB) copied, 14.040410 seconds, 36.5MB/s
awk: cmd. line:1: Division by zero
536870912 bytes (512.0MB) copied, 14.052803 seconds, 36.4MB/s
RESULT (AVG):
============
Overlay config core_freq turbo overclock_50 WRITE READ HDPARM
500 1 100.000 MHz 0.00 MB/s 0.00 MB/s 40.88 MB/s[font="Monaco, Consolas, Courier, monospace"]awk: cmd. line:1: Division by zero ¿LibreELEC related?[/font]
