hi
i have amlogic s805 and when i connect ethernet adapter its not work i can solve it ?
this the adapter type :
I have this adapter
IN7riaM3
thanks
usb ethernet adapter
-
liorglaz -
May 11, 2017 at 6:05 PM -
Thread is Unresolved
-
- Official Post
Wow, that was quite a big purchase
Doesn't the S805's own network connector work?It's possible that some ultra-cheap hardware is not picked up by the Linux kernel.
-
- Official Post
I already told you on Facebook that you need to provide information on the chipset inside the device. Then (and only then) can we investigate what is required to support the device. e.g. run "lsusb | paste" over SSH and share the URL generated so we can see the device IDs.
-
Hello,
I have the same USB ETH device and have more issues with it.
Follows the identification on my Fedora 25 Linux workstation:
- after plug-inCode
Display More[ 3354.123118] usb 1-1: new full-speed USB device number 6 using xhci_hcd [ 3354.292292] usb 1-1: New USB device found, idVendor=0fe6, idProduct=9700 [ 3354.292299] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3354.292304] usb 1-1: Product: USB 2.0 10/100M Ethernet Adaptor [ 3354.391943] dm9601 1-1:1.0 eth0: register 'dm9601' at usb-0000:00:14.0-1, Davicom DM96xx USB 10/100 Ethernet, [MAC here] [ 3354.391980] usbcore: registered new interface driver dm9601 [ 3354.394081] usbcore: registered new interface driver sr9700 [ 3354.455845] dm9601 1-1:1.0 enp0s20f0u1: renamed from eth0 [ 3354.491425] IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u1: link is not ready [ 3354.537615] dm9601 1-1:1.0 enp0s20f0u1: link up, 100Mbps, full-duplex, lpa 0xFFFF [ 3360.424311] usb 1-9: reset full-speed USB device number 4 using xhci_hcd- lsusb
CodeBus 001 Device 006: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) DM9601 Fast Ethernet AdapterI generally do not advise to use it at all. The cheapness is the only pro for this. As you can see it presents as full-duplex but it is not true. Also the 100Mbs is only in dreams. This ethernet device is hell slow half-duplex 10Mbs.
I hope it helps.
-
- Official Post
LibreELEC.tv/linux.arm.conf at libreelec-8.0-sX05 · kszaq/LibreELEC.tv · GitHub
if you are using @kszaq's S805 image and the chipset is the same one the other user identified, the driver is enabled in the kernel. This means it should work, although how well it works appears to be in question. -
- Official Post
linux-amlogic/dm9601.c at amlogic-3.10.y · LibreELEC/linux-amlogic · GitHub
device is already supported in the kernel's used on S805 devices. -
linux-amlogic/dm9601.c at amlogic-3.10.y · LibreELEC/linux-amlogic · GitHub device is already supported in the kernel's used on S805 devices.so why it not working , when i choose wired option its stay on wifi option ,
i can't choose wired option why ?
thanx
