Best settings advancedsettings.xml

Rootz · May 10, 2017 at 12:03 PM

Hello,

I´m trying to find best settings for my advancedsettings.xml to resolve buffer issues on live streams

At the moment i´m using the bellow settings on my MINI M8S II 2GB RAM

Code

<advancedsettings>
    <cache>
        <memorysize>209715200</memorysize>
        <buffermode>1</buffermode>
        <readfactor>4.0</readfactor>
    </cache>
</advancedsettings>

What do you think?
Can you share your own settings to compare to mine?

kostaman · May 10, 2017 at 12:17 PM

Quote from Rootz

I´m trying to find best settings for my advancedsettings.xml to resolve buffer issues on live streams

Don't go down that dead end road.
advancedsettings.xml will not resolve buffer issues on live streams as the slow speed of the stream source is the only thing that causes buffering.
Increasing buffer size cached in ram will only extend the playback time until buffering occurs.

**Iridium** · May 10, 2017 at 6:09 PM Official Post

I agree with kostaman. The buffer will only help for slight glitches.

With testing, the maximum usable buffering I could come up (on a Cubox-i4 2G ram) was:

If the source is reliable then look at your Wifi (if using) as that is sometimes the main issue.

Rootz · May 14, 2017 at 1:01 PM

Ok Thanks.

For local files I'm using wired Ethernet 10/100.

My mini m8s ii have wireless N
N is faster than wired 100mb/s?

**kszaq** · May 14, 2017 at 1:49 PM

In most cases it's slower.

Sent from my Nexus 4 using Tapatalk

**Iridium** · May 14, 2017 at 6:48 PM Official Post

Quote from Rootz

Ok Thanks.

For local files I'm using wired Ethernet 10/100.

My mini m8s ii have wireless N
N is faster than wired 100mb/s?

I'm afraid you've been fooled by marketing - N is capable of 150/300Mbps but in reality, you'll never get anywhere near that. Is your router in single mode (20mhz) or dual mode (40mhz). If single mode, you'll be lucky to get a link speed of 72Mbps, in dual 120Mbps.

Depending on where your box is located (How far from the router, inside a case, behind the TV etc, the Wifi reception will be reduced - your box also has a very small antenna so speed will also be reduced.

Those figures are only the link speed, NOT what you can expect.

Too see the current link speed from your box ssh into your box and run

Code

iwconfig

To test internet speed run this:

Code

curl -s https://raw.githubusercontent.com/sivel/speedtest-cli/master/speedtest.py | python -

Run them a number of times and see how and when things change.

In my setup, I bought a Wifi extender with ethernet (which bypass the internal wifi) and I get around 48Mbps, on Wifi i'm lucky to get 5Mbps

Rootz · May 19, 2017 at 5:57 PM

Quote from Iridium
I'm afraid you've been fooled by marketing - N is capable of 150/300Mbps but in reality, you'll never get anywhere near that. Is your router in single mode (20mhz) or dual mode (40mhz). If single mode, you'll be lucky to get a link speed of 72Mbps, in dual 120Mbps.

Depending on where your box is located (How far from the router, inside a case, behind the TV etc, the Wifi reception will be reduced - your box also has a very small antenna so speed will also be reduced.

Those figures are only the link speed, NOT what you can expect.

Too see the current link speed from your box ssh into your box and run
Code
iwconfig
To test internet speed run this:
Code
curl -s https://raw.githubusercontent.com/sivel/speedtest-cli/master/speedtest.py | python -
Run them a number of times and see how and when things change.

In my setup, I bought a Wifi extender with ethernet (which bypass the internal wifi) and I get around 48Mbps, on Wifi i'm lucky to get 5Mbps
Display More

iwconfig don't work for me i don't know why...
LibreELEC:~ # iwconfig
-sh: iwconfig: not found

speedtest results via lan connection:
Testing download speed...............................................................................
.Download: 91.67 Mbit/s
Testing upload speed................................................................................................
Upload: 94.23 Mbit/s

**Iridium** · May 19, 2017 at 6:12 PM Official Post

Quote

iwconfig don't work for me i don't know why...
LibreELEC:~ # iwconfig
-sh: iwconfig: not found

speedtest results via lan connection:
Testing download speed...............................................................................
.Download: 91.67 Mbit/s
Testing upload speed................................................................................................
Upload: 94.23 Mbit/s

Display More

iwconfig might be part of the LE addon Network tools.

With those internet speeds, it's more than likely the source that is the issue. However, you stated earlier that you use ethernet for local files, but the problem is with live streams - so do you use ethernet for them or Wifi?

You could increase the readfactor up to 60 but expect issues if you try to fast forward too far.

Rootz · May 20, 2017 at 12:53 PM

Quote from Iridium

iwconfig might be part of the LE addon Network tools.

With those internet speeds, it's more than likely the source that is the issue. However, you stated earlier that you use ethernet for local files, but the problem is with live streams - so do you use ethernet for them or Wifi?

You could increase the readfactor up to 60 but expect issues if you try to fast forward too far.

I only use ethernet for all.
Set readfactor to 40.
One strange thing on my advancedsettings.xml is if check kodi.log the settings are completely different.
Can you say why?

**Iridium** · May 20, 2017 at 1:00 PM Official Post

Quote from Rootz

I only use ethernet for all.
Set readfactor to 40.
One strange thing on my advancedsettings.xml is if check kodi.log the settings are completely different.
Can you say why?

That's a crash log from 29th April 2017.

View current log with more /storage/.kodi/temp/kodi.log and share URL with cat /storage/.kodi/temp/kodi.log|paste

Rootz · May 22, 2017 at 6:20 AM

That's OK.
I was looking the log from wrong folder. My settings are there.
Thanks for your help