rpi3 and LibreELEC 8.0.0.0

After upgrading my pi3 from 7.0.3 and then 8 it displays a message saying:

NEVER TOUCH boot= in extlinux.conf / cmdline.txt!
If you don’t know what you are doing,
your installation is now broken.Normal startup in 60s…

It does startup normally after that. So how do I get rid if this annoying 60 second delayReply

Quote from Iridium

Can you post the url from cat /flash/config.txt|paste and cat /flash/cmdline.txt|paste.

Certainly. /dev/mmcblk0p2 did not exist. So i tried another cmdline.txt which i found on /dev/mmcblk0p1 (in both cases there's a delay but kodi starts):
boot=UUID=176D-2AFE disk=UUID=f2c26989-d7ab-4c16-9d6a-36e40c02035b quiet

cmdline.txt
boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet

config.txt
################################################################################
# This file is part of LibreELEC - LibreELEC – Just enough OS for KODI
# Copyright (C) 2016 LibreELEC Team
#
# Inspired and partly copied from:
# OpenELEC.tv/config.txt at master · OpenELEC/OpenELEC.tv · GitHub (C) 2009-2014 Stephan Raue
# youresuchageek: Howto Raspberry Pi : OpenELEC on Raspberry Pi, get a great XBMC experience on your Raspberry Pi
#
# LibreELEC is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# LibreELEC is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with LibreELEC. If not, see <Licenses - GNU Project - Free Software Foundation>.
################################################################################
# Bootloader configuration - config.txt
################################################################################

################################################################################
# Memory (System/GPU configuration )
################################################################################

# default GPU memory split (do not change if you do not know what you are doing)
gpu_mem=128

# SDRAM size based GPU memory split, uncomment and setup to override 'gpu_mem'
gpu_mem_256=112
gpu_mem_512=160
gpu_mem_1024=256

################################################################################
# Overclocking settings
# WARNING: Do not change/enable if you do not know what you are doing!
# The System may become unstable or you can have data corruption or
# you can loose your warranty if you set wrong settings
#
# please read: RPiconfig - eLinux.org
################################################################################

# Overclock mode settings.
#
# default recommended values are: arm_freq | core_freq | sdram_freq | over_voltage
# no overclocking : 700 | 250 | 400 | 0
# mode 'Modest' : 800 | 300 | 400 | 0
# mode 'Medium' : 900 | 333 | 450 | 2
# mode 'High' : 950 | 450 | 450 | 6
# mode 'Turbo' : 1000 | 500 | 600 | 6
# mode 'Pi2' : 1000 | 500 | 500 | 2

# arm_freq=700
# core_freq=250
# sdram_freq=400
# over_voltage=0

# set to 'force_turbo=1' to disable dynamic overclocking (you can lose your warranty!)
force_turbo=0

# If you have any data corruption using Turbo Mode and overclocking
# try with this setting uncommented
# If this still fails, try to use Medium mode without "over_voltage=2"
# If it ultimately keeps failing, forget about this until it gets fixed
# Use a more conservative mode that will works fine in any cases:
# initial_turbo=30

################################################################################
# Overscan settings
################################################################################

# Make display smaller to stop text spilling off the screen
# see also Raspberry Pi • View topic - EGL windows not respecting overscan
# overscan_scale=1
# disable_overscan=1

# Adapt overscan values to your needs
# overscan_left=57
# overscan_right=59
# overscan_top=20
# overscan_bottom=20

################################################################################
# various settings see also: RPiconfig - eLinux.org
################################################################################

# Force HDMI even if unplugged or powered off
hdmi_force_hotplug=1

# Doesn't sent initial active source message.
# Avoids bringing CEC (enabled TV) out of standby and channel switch when
# rebooting.
hdmi_ignore_cec_init=1

################################################################################
# License keys to enable GPU hardware decoding for various codecs
# to obtain keys visit the shop at Raspberry Pi Store
################################################################################

# decode_MPG2=0x00000000
# decode_WVC1=0x00000000
# decode_DTS=0x00000000
# decode_DDP=0x00000000

################################################################################
# End of default configuration
# all values below this line were inserted from config.txt.bk (your old config)
# and can be merged with the above values
################################################################################
[hr]

Quote from Iridium

Can you post the url from cat /flash/config.txt|paste and cat /flash/cmdline.txt|paste.

Oh didnt read it right, here you go:

YeiW
bKMB
WPMB

Thanks, the source code clarified a lot. Decided to write a fresh image to the flash, update cmdline.txt and all problems are resolved.