Hello everyone,
I'm having troubles with Libreelec 7.0.3 installed on a Acer Aspire One model 532h-2Bb (Atom N450 - 1GB Ram)
Can't find why Alps Glidepoint is not working. I tested input in /proc/ folder and Touchpad is sending signals because I see screen fullfilled with strange characters while I move finger over it.
If I boot the same netbook with any xubuntu distro from an USB key, all is OK, Touchpad is working properly as it should.
No way, tough, to see arrow cursor working on screen when using OpenElec so I have to plug an external usb mouse or use keyb arrows.
There's some lines at the bottom of log file saying:
[2472382.844] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse0)
[2472382.844] (II) No input driver specified, ignoring this device.
[2472382.844] (II) This device may have been added with another device file.
Anyone can help me?
Thank you a lot
Here is the whole output of log in /var/log/Xorg.0.log .
_XSERVTransTransNoListen: unable to find transport: tcp
Failed to disable listen for tcp transport_XSERVTransTransNoListen: unable to find transport: tcp
Failed to disable listen for tcp transport[2472382.034]
X.Org X Server 1.18.3
Release Date: 2016-04-04
[2472382.037] X Protocol Version 11, Revision 0
[2472382.037] Build Operating System: Linux 4.4.0-47-generic x86_64 LibreELEC.tv
[2472382.038] Current Operating System: Linux LibreELEC 4.4.13 #1 SMP Sat Nov 26 09:47:49 GMT 2016 x86_64
[2472382.038] Kernel command line: root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1 BOOT_IMAGE=/KERNEL boot=LABEL=System disk=LABEL=Storage quiet
[2472382.040] Build Date: 26 November 2016 12:26:02PM
[2472382.040]
[2472382.040] Current version of pixman: 0.34.0
[2472382.040] Before reporting problems, check X.Org
to make sure that you have the latest version.
[2472382.040] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[2472382.040] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 3 09:51:06 2017
[2472382.042] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[2472382.045] (==) No Layout section. Using the first Screen section.
[2472382.050] (==) No screen section available. Using defaults.
[2472382.050] (**) |-->Screen "Default Screen Section" (0)
[2472382.050] (**) | |-->Monitor "<default monitor>"
[2472382.052] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[2472382.052] (==) Automatically adding devices
[2472382.052] (==) Automatically enabling devices
[2472382.053] (==) Automatically adding GPU devices
[2472382.053] (==) Max clients allowed: 256, resource mask: 0x1fffff
[2472382.053] (==) FontPath set to:
/usr/share/fonts/misc,
built-ins
[2472382.053] (==) ModulePath set to "/usr/lib/xorg/modules"
[2472382.054] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[2472382.054] (II) Loader magic: 0x5c4820
[2472382.054] (II) Module ABI versions:
[2472382.054] X.Org ANSI C Emulation: 0.4
[2472382.054] X.Org Video Driver: 20.0
[2472382.054] X.Org XInput driver : 22.1
[2472382.054] X.Org Server Extension : 9.0
[2472382.056] (II) xfree86: Adding drm device (/dev/dri/card0)
[2472382.061] (--) PCI:*(0:0:2:0) 8086:a011:1025:0349 rev 0, Mem @ 0x58180000/524288, 0x40000000/268435456, 0x58000000/1048576, I/O @ 0x000060c0/8
[2472382.061] (--) PCI: (0:0:2:1) 8086:a012:1025:0349 rev 0, Mem @ 0x58100000/524288
[2472382.061] (II) LoadModule: "glx"
[2472382.063] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[2472382.223] (II) Module glx: vendor="X.Org Foundation"
[2472382.223] compiled for 1.18.3, module version = 1.0.0
[2472382.223] ABI class: X.Org Server Extension, version 9.0
[2472382.223] (==) AIGLX enabled
[2472382.223] (==) Matched intel as autoconfigured driver 0
[2472382.223] (==) Matched intel as autoconfigured driver 1
[2472382.223] (==) Matched modesetting as autoconfigured driver 2
[2472382.223] (==) Matched fbdev as autoconfigured driver 3
[2472382.223] (==) Matched vesa as autoconfigured driver 4
[2472382.223] (==) Assigned the driver to the xf86ConfigLayout
[2472382.223] (II) LoadModule: "intel"
[2472382.224] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[2472382.272] (II) Module intel: vendor="X.Org Foundation"
[2472382.273] compiled for 1.18.3, module version = 2.99.917
[2472382.273] Module class: X.Org Video Driver
[2472382.273] ABI class: X.Org Video Driver, version 20.0
[2472382.273] (II) LoadModule: "modesetting"
[2472382.273] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[2472382.286] (II) Module modesetting: vendor="X.Org Foundation"
[2472382.286] compiled for 1.18.3, module version = 1.18.3
[2472382.286] Module class: X.Org Video Driver
[2472382.286] ABI class: X.Org Video Driver, version 20.0
[2472382.286] (II) LoadModule: "fbdev"
[2472382.287] (WW) Warning, couldn't open module fbdev
[2472382.287] (II) UnloadModule: "fbdev"
[2472382.287] (II) Unloading fbdev
[2472382.287] (EE) Failed to load module "fbdev" (module does not exist, 0)
[2472382.287] (II) LoadModule: "vesa"
[2472382.288] (WW) Warning, couldn't open module vesa
[2472382.288] (II) UnloadModule: "vesa"
[2472382.288] (II) Unloading vesa
[2472382.288] (EE) Failed to load module "vesa" (module does not exist, 0)
[2472382.288] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[2472382.288] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[2472382.288] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[2472382.288] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[2472382.288] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[2472382.288] (++) using VT number 1
[2472382.299] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[2472382.299] (WW) Falling back to old probe method for modesetting
[2472382.304] (--) intel(0): Integrated Graphics Chipset: Intel(R) Pineview GM
[2472382.304] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3; using a maximum of 1 threads
[2472382.304] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[2472382.305] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[2472382.305] (==) intel(0): RGB weight 888
[2472382.305] (==) intel(0): Default visual is TrueColor
[2472382.305] (II) intel(0): Output LVDS1 has no monitor section
[2472382.305] (II) intel(0): Enabled output LVDS1
[2472382.305] (II) intel(0): Output VGA1 has no monitor section
[2472382.305] (II) intel(0): Enabled output VGA1
[2472382.305] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[2472382.306] (II) intel(0): Output VIRTUAL1 has no monitor section
[2472382.306] (II) intel(0): Enabled output VIRTUAL1
[2472382.306] (--) intel(0): Output LVDS1 using initial mode 1024x600 on pipe 1
[2472382.306] (==) intel(0): TearFree disabled
[2472382.306] (==) intel(0): DPI set to (96, 96)
[2472382.306] (II) Loading sub module "dri2"
[2472382.306] (II) LoadModule: "dri2"
[2472382.306] (II) Module "dri2" already built-in
[2472382.306] (II) Loading sub module "present"
[2472382.306] (II) LoadModule: "present"
[2472382.306] (II) Module "present" already built-in
[2472382.306] (II) UnloadModule: "modesetting"
[2472382.306] (II) Unloading modesetting
[2472382.306] (==) Depth 24 pixmap format is 32 bpp
[2472382.311] (II) intel(0): SNA initialized with Alviso (gen3) backend
[2472382.311] (==) intel(0): Backing store enabled
[2472382.311] (==) intel(0): Silken mouse enabled
[2472382.311] (II) intel(0): HW Cursor enabled
[2472382.311] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[2472382.311] (==) intel(0): DPMS enabled
[2472382.311] (==) intel(0): Display hotplug detection enabled
[2472382.316] (II) intel(0): [DRI2] Setup complete
[2472382.316] (II) intel(0): [DRI2] DRI driver: i915
[2472382.316] (II) intel(0): [DRI2] VDPAU driver: va_gl
[2472382.316] (II) intel(0): direct rendering: DRI2 enabled
[2472382.316] (II) intel(0): hardware support for Present enabled
[2472382.316] (--) RandR disabled
[2472382.512] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[2472382.512] (II) AIGLX: enabled GLX_ARB_create_context
[2472382.512] (II) AIGLX: enabled GLX_ARB_create_context_profile
[2472382.512] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[2472382.512] (II) AIGLX: enabled GLX_INTEL_swap_event
[2472382.512] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[2472382.512] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[2472382.512] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[2472382.512] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[2472382.512] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[2472382.512] (II) AIGLX: Loaded and initialized i915
[2472382.512] (II) GLX: Initialized DRI2 GL provider for screen 0
[2472382.519] (II) intel(0): switch to mode 1024x600@60.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[2472382.519] (II) intel(0): Setting screen physical size to 270 x 158
[2472382.725] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[2472382.725] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[2472382.725] (II) LoadModule: "evdev"
[2472382.726] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[2472382.733] (II) Module evdev: vendor="X.Org Foundation"
[2472382.733] compiled for 1.18.3, module version = 2.10.1
[2472382.733] Module class: X.Org XInput Driver
[2472382.733] ABI class: X.Org XInput driver, version 22.1
[2472382.734] (II) Using input driver 'evdev' for 'Power Button'
[2472382.734] (**) Power Button: always reports core events
[2472382.734] (**) evdev: Power Button: Device: "/dev/input/event3"
[2472382.734] (--) evdev: Power Button: Vendor 0 Product 0x1
[2472382.734] (--) evdev: Power Button: Found keys
[2472382.734] (II) evdev: Power Button: Configuring as keyboard
[2472382.734] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[2472382.734] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[2472382.734] (**) Option "xkb_rules" "evdev"
[2472382.734] (**) Option "xkb_model" "pc105"
[2472382.734] (**) Option "xkb_layout" "us,us"
[2472382.734] (**) Option "xkb_variant" ","
[2472382.734] (**) Option "xkb_options" "grp:alt_shift_toggle"
[2472382.823] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[2472382.823] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[2472382.823] (II) Using input driver 'evdev' for 'Video Bus'
[2472382.823] (**) Video Bus: always reports core events
[2472382.823] (**) evdev: Video Bus: Device: "/dev/input/event4"
[2472382.823] (--) evdev: Video Bus: Vendor 0 Product 0x6
[2472382.823] (--) evdev: Video Bus: Found keys
[2472382.823] (II) evdev: Video Bus: Configuring as keyboard
[2472382.823] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[2472382.824] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[2472382.824] (**) Option "xkb_rules" "evdev"
[2472382.824] (**) Option "xkb_model" "pc105"
[2472382.824] (**) Option "xkb_layout" "us,us"
[2472382.824] (**) Option "xkb_variant" ","
[2472382.824] (**) Option "xkb_options" "grp:alt_shift_toggle"
[2472382.826] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[2472382.826] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[2472382.826] (II) Using input driver 'evdev' for 'Power Button'
[2472382.826] (**) Power Button: always reports core events
[2472382.826] (**) evdev: Power Button: Device: "/dev/input/event0"
[2472382.826] (--) evdev: Power Button: Vendor 0 Product 0x1
[2472382.826] (--) evdev: Power Button: Found keys
[2472382.826] (II) evdev: Power Button: Configuring as keyboard
[2472382.826] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[2472382.826] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 
[2472382.826] (**) Option "xkb_rules" "evdev"
[2472382.826] (**) Option "xkb_model" "pc105"
[2472382.826] (**) Option "xkb_layout" "us,us"
[2472382.826] (**) Option "xkb_variant" ","
[2472382.826] (**) Option "xkb_options" "grp:alt_shift_toggle"
[2472382.829] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[2472382.829] (II) No input driver specified, ignoring this device.
[2472382.829] (II) This device may have been added with another device file.
[2472382.830] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[2472382.830] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[2472382.830] (II) Using input driver 'evdev' for 'Sleep Button'
[2472382.830] (**) Sleep Button: always reports core events
[2472382.830] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[2472382.830] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[2472382.830] (--) evdev: Sleep Button: Found keys
[2472382.830] (II) evdev: Sleep Button: Configuring as keyboard
[2472382.830] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[2472382.830] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[2472382.831] (**) Option "xkb_rules" "evdev"
[2472382.831] (**) Option "xkb_model" "pc105"
[2472382.831] (**) Option "xkb_layout" "us,us"
[2472382.831] (**) Option "xkb_variant" ","
[2472382.831] (**) Option "xkb_options" "grp:alt_shift_toggle"
[2472382.834] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[2472382.834] (II) No input driver specified, ignoring this device.
[2472382.834] (II) This device may have been added with another device file.
[2472382.835] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[2472382.835] (II) No input driver specified, ignoring this device.
[2472382.835] (II) This device may have been added with another device file.
[2472382.836] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[2472382.836] (II) No input driver specified, ignoring this device.
[2472382.836] (II) This device may have been added with another device file.
[2472382.838] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[2472382.838] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[2472382.838] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[2472382.838] (**) AT Translated Set 2 keyboard: always reports core events
[2472382.838] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event5"
[2472382.838] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[2472382.838] (--) evdev: AT Translated Set 2 keyboard: Found keys
[2472382.838] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[2472382.838] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[2472382.838] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[2472382.838] (**) Option "xkb_rules" "evdev"
[2472382.838] (**) Option "xkb_model" "pc105"
[2472382.838] (**) Option "xkb_layout" "us,us"
[2472382.838] (**) Option "xkb_variant" ","
[2472382.838] (**) Option "xkb_options" "grp:alt_shift_toggle"
[2472382.841] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event6)
[2472382.841] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[2472382.841] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchscreen catchall"
[2472382.841] (II) Using input driver 'evdev' for 'AlpsPS/2 ALPS GlidePoint'
[2472382.841] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[2472382.841] (**) evdev: AlpsPS/2 ALPS GlidePoint: Device: "/dev/input/event6"
[2472382.841] (--) evdev: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[2472382.841] (--) evdev: AlpsPS/2 ALPS GlidePoint: Found 3 mouse buttons
[2472382.841] (--) evdev: AlpsPS/2 ALPS GlidePoint: Found absolute axes
[2472382.841] (--) evdev: AlpsPS/2 ALPS GlidePoint: Found absolute multitouch axes
[2472382.841] (--) evdev: AlpsPS/2 ALPS GlidePoint: Found x and y absolute axes
[2472382.841] (--) evdev: AlpsPS/2 ALPS GlidePoint: Found absolute touchpad.
[2472382.841] (II) evdev: AlpsPS/2 ALPS GlidePoint: Configuring as touchpad
[2472382.841] (**) evdev: AlpsPS/2 ALPS GlidePoint: YAxisMapping: buttons 4 and 5
[2472382.841] (**) evdev: AlpsPS/2 ALPS GlidePoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[2472382.841] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event6"
[2472382.841] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 11)
[2472382.842] (II) evdev: AlpsPS/2 ALPS GlidePoint: initialized for absolute axes.
[2472382.843] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[2472382.843] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 0
[2472382.843] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[2472382.843] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[2472382.844] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse0)
[2472382.844] (II) No input driver specified, ignoring this device.
[2472382.844] (II) This device may have been added with another device file.
[2472384.307] (II) intel(0): EDID vendor "AUO", prod id 12498
[2472384.307] (II) intel(0): Printing DDC gathered Modelines:
[2472384.307] (II) intel(0): Modeline "1024x600"x0.0 52.00 1024 1048 1184 1344 600 603 604 644 -hsync -vsync (38.7 kHz eP)
[2472927.316] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye™ (/dev/input/mouse1)
[2472927.316] (II) No input driver specified, ignoring this device.
[2472927.316] (II) This device may have been added with another device file.
[2472927.704] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye™ (/dev/input/event10)
[2472927.704] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye™: Applying InputClass "evdev pointer catchall"
[2472927.704] (II) Using input driver 'evdev' for 'Microsoft Microsoft 3-Button Mouse with IntelliEye™'
[2472927.704] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye™: always reports core events
[2472927.704] (**) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye™: Device: "/dev/input/event10"
[2472927.755] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye™: Vendor 0x45e Product 0x7d
[2472927.755] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye™: Found 3 mouse buttons
[2472927.755] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye™: Found scroll wheel(s)
[2472927.755] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye™: Found relative axes
[2472927.756] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye™: Found x and y relative axes
[2472927.756] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye™: Configuring as mouse
[2472927.756] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye™: Adding scrollwheel support
[2472927.756] (**) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye™: YAxisMapping: buttons 4 and 5
[2472927.756] (**) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye™: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[2472927.756] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:045E:007D.0001/input/input12/event10"
[2472927.756] (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye™" (type: MOUSE, id 12)
[2472927.756] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye™: initialized for relative axes.
[2472927.757] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye™: (accel) keeping acceleration scheme 1
[2472927.757] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye™: (accel) acceleration profile 0
[2472927.758] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye™: (accel) acceleration factor: 2.000
[2472927.758] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye™: (accel) acceleration threshold: 4
[2478902.606] (II) config/udev: removing device Microsoft Microsoft 3-Button Mouse with IntelliEye™
[2478902.615] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye™: Close
[2478902.615] (II) UnloadModule: "evdev"
