HDD mount problem with rpi

Kirketspock · June 18, 2016 at 5:08 PM

Hello
I have a rpi 1 + libreelec 7
at boot my hard drive is not detected (not mount)
( 3.5p wd my book drive formated in ntfs) but if i restant, it is detected fine ?
No error with fdisk or ntfsfix....
Under OSMC there are no problem
Sorry for bad my english

**Klojum** · June 18, 2016 at 6:26 PM Official Post

Linux can be pretty picky about drives that are not unmounted properly.

If you can use SSH, connect your WD drive, log in via ssh (root/libreelec), and give us the URL for the following commands:

Code

dmesg | pastebinit

Code

blkid | pastebinit

Code

mount | pastebinit

Kirketspock · June 18, 2016 at 7:12 PM

Quote from Klojum
Linux can be pretty picky about drives that are not unmounted properly.

If you can use SSH, connect your WD drive, log in via ssh (root/libreelec), and give us the URL for the following commands:
Code
dmesg | pastebinit
gGhb
Code
blkid | pastebinit
QDbU
Code
mount | pastebinit
SaUd

**Klojum** · June 18, 2016 at 8:14 PM Official Post

When browsing through the folders, check this location:

/var/media/My Book

Kirketspock · June 18, 2016 at 8:38 PM

What should i do ?

**Klojum** · June 19, 2016 at 12:00 PM Official Post

Use the File Manager, and follow the "/var/media/My Book" path. Your WD drive should show its contents there.
If you want to add videos from that drive, use that same path.

Kirketspock · June 19, 2016 at 3:17 PM

Thank
But, My problem is : the first boot hard drive does not appear in kodi . but if I restarts at boot my hard drive appears and is usable.... Why?

**chewitt** · June 19, 2016 at 3:23 PM Official Post

Do a clean boot, and with the drive not visible, run "eject /dev/sr0" via SSH. Does the drive appear?

Kirketspock · June 19, 2016 at 6:25 PM

I have this message : /dev/sr0 : input /output error