kodi restart when i start a video

eduardo1234 · June 7, 2016 at 3:17 PM

I have, RPi2 + LibreELEC 7.0.1

When I start some videos, shows up a black screen. after 3 sec, kodi restart.

Kodi.log

Code

15:32:54 10859.416016 T:840151968   ERROR: CMMALRenderer::init_vout Failed to vout enable input port (status=1 ENOMEM)
15:32:54 10859.416016 T:840151968   ERROR: OutputPicture - failed to configure renderer

those files that make kodi crash:
Wayward.Pines.S01E02.Do.Not.Discuss.Your.Life.Before.1080p.WEB-DL.6CH.x265.HEVC-PSA.mkv
carol.2015.1080p.bluray.6ch.hevc.x265.rmteam.mkv

i dont know if is a video or audio(hevc 6 channels) problem

**DaVu** · June 7, 2016 at 3:30 PM Official Post

Please get us a full debug log with debugging enabled. Those snippets are mostly useless.

eduardo1234 · June 7, 2016 at 4:57 PM

Quote from DaVu

Please get us a full debug log with debugging enabled. Those snippets are mostly useless.

I dont know if debugging is enable. this is a file where is storaged in smb/../logfiles

**DaVu** · June 7, 2016 at 5:09 PM Official Post

debug logging was disabled, but I saw you have some of those banned repositories installed. Remove those first. Best would be, to do a factory reset or a fresh install.

For the factory reset:

SSH in and do the following command:

Code

mv /storage/.kodi /storage/kodi-bak

Then restart your device. All settings and addons are "gone" but backuped in the "kodi-bak"-folder. So we are able to restore them easily, if you want that.

You could also do a hard reset via the guy and the LibreELEC settings addon.

After all those repositories are removed, please try again and then provide a new logfile this way if you still have issues:

HOW TO:Provide Logfile - LibreELEC

sturgeon86 · log-2016-10-08-00.33.46.zip

Hi,
I got the same exact issue. But I have a fresh install, no addons (except opensubtitles).
My log files are included. Seems to do it with H265 video.

**DaVu** · October 8, 2016 at 6:49 AM Official Post

your log doesn't contain any h.265 video codec.

What might be interesting is, what happened between that time and why you get a permission denied error. You should fix that too:

Quote

07:10:57 T:139703077926976 NOTICE: Details: Total Axis: 4 Total Hats: 1 Total Buttons: 12
23:14:45 T:139702699284224 ERROR: SMBDirectory->GetDirectory: Unable to open directory : 'smb://HOMENAS/Multimedia'
unix_err:'d' error : 'Permission denied'

The movie which seems to fail is h.264:

Quote

23:17:01 T:139703077926976 NOTICE: DVDPlayer: Opening: smb://HOMENAS/Multimedia/Media/Video/Films/Enfants/Disney HD - Max2Power/Raiponce -Tangled [2010] 720p BRRiP x264 - Qc-France-Vo By Max2Power (22).mp4
23:17:01 T:139703077926976 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED
23:17:01 T:139702016624384 NOTICE: Creating InputStream
23:17:01 T:139702016624384 NOTICE: Creating Demuxer
23:17:01 T:139702016624384 NOTICE: Opening stream: 0 source: 256
23:17:01 T:139702016624384 NOTICE: Creating video codec with codec id: 28
23:17:01 T:139702016624384 NOTICE: CDVDVideoCodecFFmpeg::Open() Using codec: H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10

Display More

Beside the fact, that the log is 3 days long (following the timestamps) you should reboot sometimes, your logfile isn't a debuglog:

07:10:56 T:139703077926976 NOTICE: Disabled debug logging due to GUI setting. Level

So either change to a nightly build and test if your problem is already solved or provide a logfile like the way I explained in the link above.

sturgeon86 · October 8, 2016 at 1:31 PM

Thanks for your help
here's what I did
1) Reboot
2) Enable debug log
3) Launch fautly file

Here's my Kodi.log

Thanks again
[hr]
Tried to read the log,
seems like the HEVC profile is not supported. I have not found yet how to determine used profile and supported one.

Quote

12:25:07 T:140494406055680 DEBUG: ffmpeg[7FC7672A7700]: [hevc] Unknown HEVC profile: 0
12:25:07 T:140494406055680 DEBUG: Previous line repeats 1 times.
12:25:07 T:140494406055680 DEBUG: ffmpeg[7FC7672A7700]: [hevc] Invalid default display window