I updated acutal openELEC x86_64 to latest Beta.
Now the xServer won't start anymore.
dmesg:
Code
LibreELEC:~ # dmesg
[ 0.000000] Linux version 4.9.3 (chewitt@buildbox) (gcc version 6.2.0 (GCC) ) #1 SMP Wed Jan 25 07:17:18 GMT 2017
[ 0.000000] Command line: BOOT_IMAGE=/KERNEL boot=LABEL=System disk=LABEL=Storage quiet
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e7000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006ffaffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006ffb0000-0x000000006ffbffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000006ffc0000-0x000000006ffeffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000006fff0000-0x000000006fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./N68C-S UCC, BIOS P1.40 08/25/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x6ffb0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFFC0000000 write-back
[ 0.000000] 1 base 000040000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 000060000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x035a6000, 0x035a6fff] PGTABLE
[ 0.000000] BRK [0x035a7000, 0x035a7fff] PGTABLE
[ 0.000000] BRK [0x035a8000, 0x035a8fff] PGTABLE
[ 0.000000] BRK [0x035a9000, 0x035a9fff] PGTABLE
[ 0.000000] BRK [0x035aa000, 0x035aafff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FB580 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x000000006FFB0000 000040 (v01 A_M_I OEMRSDT 08001025 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000006FFB0200 000084 (v02 A_M_I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000006FFB0460 00494C (v01 AS361 AS361135 00000135 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000006FFC0000 000040
[ 0.000000] ACPI: APIC 0x000000006FFB0390 000090 (v01 A_M_I OEMAPIC 08001025 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x000000006FFB0420 00003C (v01 A_M_I OEMMCFG 08001025 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000006FFC0040 000061 (v01 A_M_I AMI_OEM 08001025 MSFT 00000097)
[ 0.000000] ACPI: SRAT 0x000000006FFB4DB0 0000A0 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: AAFT 0x000000006FFB4E50 000027 (v01 A_M_I OEMAAFT 08001025 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x000000006FFB4E80 000458 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0x7fffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x6ffaffff] -> [mem 0x00000000-0x6ffaffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x6ffac000-0x6ffaffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000006ffaffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000006ffaffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000006ffaffff]
[ 0.000000] On node 0 totalpages: 458574
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7103 pages used for memmap
[ 0.000000] DMA32 zone: 454576 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 6 CPUs, 4 hotplug CPUs
[ 0.000000] e820: [mem 0x70000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] percpu: Embedded 33 pages/cpu @ffff88006fc00000 s95256 r8192 d31720 u262144
[ 0.000000] pcpu-alloc: s95256 r8192 d31720 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 451386
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1 BOOT_IMAGE=/KERNEL boot=LABEL=System disk=LABEL=Storage quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x2c82000000-0x2c83ffffff] (32MB)
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 1766096K/1834296K available (11319K kernel code, 852K rwdata, 20124K rodata, 4476K init, 400K bss, 68200K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=6.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[ 0.000000] NR_IRQS:4352 nr_irqs:472 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches PMTIMER. 1 loops
[ 0.000000] tsc: Detected 2812.786 MHz processor
[ 0.000026] Calibrating delay loop (skipped), value calculated using timer frequency.. 5627.97 BogoMIPS (lpj=9375953)
[ 0.000029] pid_max: default: 32768 minimum: 301
[ 0.000035] ACPI: Core revision 20160831
[ 0.002132] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.002249] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.003173] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.003640] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.003642] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.003930] CPU: Physical Processor ID: 0
[ 0.003930] CPU: Processor Core ID: 0
[ 0.003933] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.003934] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[ 0.004122] Freeing SMP alternatives memory: 44K (ffffffff83536000 - ffffffff83541000)
[ 0.006003] smpboot: Max logical packages: 3
[ 0.006502] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.144015] smpboot: CPU0: AMD Athlon(tm) II X2 220 Processor (family: 0x10, model: 0x6, stepping: 0x3)
[ 0.144019] Performance Events: AMD PMU driver.
[ 0.144024] ... version: 0
[ 0.144024] ... bit width: 48
[ 0.144025] ... generic registers: 4
[ 0.144025] ... value mask: 0000ffffffffffff
[ 0.144026] ... max period: 00007fffffffffff
[ 0.144026] ... fixed-purpose events: 0
[ 0.144027] ... event mask: 000000000000000f
[ 0.144303] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.144398] x86: Booting SMP configuration:
[ 0.144399] .... node #0, CPUs: #1
[ 0.229538] x86: Booted up 1 node, 2 CPUs
[ 0.229541] smpboot: Total of 2 processors activated (11255.66 BogoMIPS)
[ 0.230030] devtmpfs: initialized
[ 0.230347] PM: Registering ACPI NVS region [mem 0x6ffc0000-0x6ffeffff] (196608 bytes)
[ 0.230393] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.230416] xor: measuring software checksum speed
[ 0.260684] prefetch64-sse: 13532.400 MB/sec
[ 0.294016] generic_sse: 12663.600 MB/sec
[ 0.294016] xor: using function: prefetch64-sse (13532.400 MB/sec)
[ 0.294020] pinctrl core: initialized pinctrl subsystem
[ 0.294137] NET: Registered protocol family 16
[ 0.306061] cpuidle: using governor ladder
[ 0.319396] cpuidle: using governor menu
[ 0.319402] node 0 link 0: io port [1000, ffffff]
[ 0.319404] TOM: 0000000080000000 aka 2048M
[ 0.319406] Fam 10h mmconf [mem 0xfc000000-0xfdffffff]
[ 0.319407] node 0 link 0: mmio [fc000000, fdffffff] ==> none
[ 0.319409] node 0 link 0: mmio [80000000, fbffffff]
[ 0.319410] node 0 link 0: mmio [fe000000, fe0bffff]
[ 0.319412] node 0 link 0: mmio [a0000, bffff]
[ 0.319413] bus: [bus 00-07] on node 0 link 0
[ 0.319414] bus: 00 [io 0x0000-0xffff]
[ 0.319415] bus: 00 [mem 0x80000000-0xfbffffff]
[ 0.319416] bus: 00 [mem 0xfe000000-0xfcffffffff]
[ 0.319416] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.319532] ACPI: bus type PCI registered
[ 0.319607] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
[ 0.319608] PCI: not using MMCONFIG
[ 0.319609] PCI: Using configuration type 1 for base access
[ 0.319609] PCI: Using configuration type 1 for extended access
[ 0.387341] raid6: sse2x1 gen() 3556 MB/s
[ 0.444002] raid6: sse2x1 xor() 3768 MB/s
[ 0.500666] raid6: sse2x2 gen() 6112 MB/s
[ 0.557330] raid6: sse2x2 xor() 6474 MB/s
[ 0.614007] raid6: sse2x4 gen() 6519 MB/s
[ 0.670660] raid6: sse2x4 xor() 3975 MB/s
[ 0.670661] raid6: using algorithm sse2x4 gen() 6519 MB/s
[ 0.670662] raid6: .... xor() 3975 MB/s, rmw enabled
[ 0.670663] raid6: using intx1 recovery algorithm
[ 0.670707] ACPI: Added _OSI(Module Device)
[ 0.670708] ACPI: Added _OSI(Processor Device)
[ 0.670709] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.670709] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.670958] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.672704] ACPI: Interpreter enabled
[ 0.672717] ACPI: (supports S0 S1 S5)
[ 0.672718] ACPI: Using IOAPIC for interrupt routing
[ 0.672743] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
[ 0.673454] PCI: MMCONFIG at [mem 0xfc000000-0xfdffffff] reserved in ACPI motherboard resources
[ 0.673461] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.678061] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.678067] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.678071] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.678079] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
[ 0.678125] acpi PNP0A03:00: ignoring host bridge window [mem 0x000d0000-0x000dffff window] (conflicts with Adapter ROM [mem 0x000cf000-0x000d07ff])
[ 0.678150] PCI host bridge to bus 0000:00
[ 0.678152] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.678154] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.678155] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.678156] pci_bus 0000:00: root bus resource [mem 0x80000000-0xff37ffff window]
[ 0.678157] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.678175] pci 0000:00:00.0: [10de:03e2] type 00 class 0x050000
[ 0.678367] pci 0000:00:01.0: [10de:03e1] type 00 class 0x060100
[ 0.678373] pci 0000:00:01.0: reg 0x10: [io 0x0900-0x09ff]
[ 0.678445] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[ 0.678453] pci 0000:00:01.1: reg 0x10: [io 0xec00-0xec3f]
[ 0.678466] pci 0000:00:01.1: reg 0x20: [io 0x0600-0x063f]
[ 0.678470] pci 0000:00:01.1: reg 0x24: [io 0x0700-0x073f]
[ 0.678493] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.678522] pci 0000:00:01.1: System wakeup disabled by ACPI
[ 0.678552] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[ 0.678619] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[ 0.678626] pci 0000:00:02.0: reg 0x10: [mem 0xfbeff000-0xfbefffff]
[ 0.678656] pci 0000:00:02.0: supports D1 D2
[ 0.678657] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.678681] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.678711] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[ 0.678718] pci 0000:00:02.1: reg 0x10: [mem 0xfbefec00-0xfbefecff]
[ 0.678753] pci 0000:00:02.1: supports D1 D2
[ 0.678754] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.678778] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.678815] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[ 0.678863] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.678892] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[ 0.678900] pci 0000:00:05.0: reg 0x10: [mem 0xfbef8000-0xfbefbfff]
[ 0.678936] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.678960] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.678994] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[ 0.679013] pci 0000:00:06.0: reg 0x20: [io 0xffa0-0xffaf]
[ 0.679021] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.679022] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.679023] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.679024] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.679081] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
[ 0.679087] pci 0000:00:07.0: reg 0x10: [mem 0xfbefd000-0xfbefdfff]
[ 0.679090] pci 0000:00:07.0: reg 0x14: [io 0xe480-0xe487]
[ 0.679118] pci 0000:00:07.0: supports D1 D2
[ 0.679119] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.679144] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.679173] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[ 0.679178] pci 0000:00:08.0: reg 0x10: [io 0xe400-0xe407]
[ 0.679181] pci 0000:00:08.0: reg 0x14: [io 0xe080-0xe083]
[ 0.679184] pci 0000:00:08.0: reg 0x18: [io 0xe000-0xe007]
[ 0.679187] pci 0000:00:08.0: reg 0x1c: [io 0xdc00-0xdc03]
[ 0.679190] pci 0000:00:08.0: reg 0x20: [io 0xd880-0xd88f]
[ 0.679194] pci 0000:00:08.0: reg 0x24: [mem 0xfbefc000-0xfbefcfff]
[ 0.679255] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
[ 0.679261] pci 0000:00:08.1: reg 0x10: [io 0xd800-0xd807]
[ 0.679264] pci 0000:00:08.1: reg 0x14: [io 0xd480-0xd483]
[ 0.679267] pci 0000:00:08.1: reg 0x18: [io 0xd400-0xd407]
[ 0.679270] pci 0000:00:08.1: reg 0x1c: [io 0xd080-0xd083]
[ 0.679273] pci 0000:00:08.1: reg 0x20: [io 0xd000-0xd00f]
[ 0.679276] pci 0000:00:08.1: reg 0x24: [mem 0xfbef3000-0xfbef3fff]
[ 0.679341] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[ 0.679369] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.679392] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.679423] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[ 0.679444] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.679467] pci 0000:00:0b.0: System wakeup disabled by ACPI
[ 0.679496] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[ 0.679516] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.679541] pci 0000:00:0c.0: System wakeup disabled by ACPI
[ 0.679568] pci 0000:00:0d.0: [10de:03d6] type 00 class 0x030000
[ 0.679573] pci 0000:00:0d.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.679578] pci 0000:00:0d.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.679581] pci 0000:00:0d.0: reg 0x1c: [mem 0xf9000000-0xf9ffffff 64bit]
[ 0.679586] pci 0000:00:0d.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
[ 0.679646] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.679695] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.679740] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.679789] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.679838] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.679921] pci 0000:01:0a.0: [1131:7134] type 00 class 0x048000
[ 0.679932] pci 0000:01:0a.0: reg 0x10: [mem 0xfbfffc00-0xfbffffff]
[ 0.679982] pci 0000:01:0a.0: supports D1 D2
[ 0.680022] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.680024] pci 0000:00:04.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.680027] pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.680028] pci 0000:00:04.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.680029] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.680030] pci 0000:00:04.0: bridge window [mem 0x80000000-0xff37ffff window] (subtractive decode)
[ 0.680052] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.680074] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.680097] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 0.680636] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.680716] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.680779] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11
[ 0.680842] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.680905] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.680968] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 0.681031] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.681093] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 0.681156] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[ 0.681219] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[ 0.681281] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
[ 0.681347] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 0.681410] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 0.681473] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *10
[ 0.681535] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 0.681603] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.681666] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[ 0.681728] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
[ 0.681837] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.681881] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.682090] vgaarb: setting as boot device: PCI:0000:00:0d.0
[ 0.682091] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.682093] vgaarb: loaded
[ 0.682094] vgaarb: bridge control possible 0000:00:0d.0
[ 0.682167] SCSI subsystem initialized
[ 0.682241] libata version 3.00 loaded.
[ 0.682260] ACPI: bus type USB registered
[ 0.682282] usbcore: registered new interface driver usbfs
[ 0.682291] usbcore: registered new interface driver hub
[ 0.682302] usbcore: registered new device driver usb
[ 0.682324] pps_core: LinuxPPS API ver. 1 registered
[ 0.682324] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.682327] PTP clock support registered
[ 0.682363] Advanced Linux Sound Architecture Driver Initialized.
[ 0.682364] PCI: Using ACPI for IRQ routing
[ 0.683018] PCI: pci_cache_line_size set to 64 bytes
[ 0.683050] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.683051] e820: reserve RAM buffer [mem 0x6ffb0000-0x6fffffff]
[ 0.683278] clocksource: Switched to clocksource refined-jiffies
[ 0.683357] pnp: PnP ACPI init
[ 0.683418] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.683745] pnp 00:01: [dma 3]
[ 0.683830] pnp 00:01: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.684129] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.684131] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.684132] system 00:02: [io 0x0580-0x05ff] has been reserved
[ 0.684133] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.684134] system 00:02: [io 0x0880-0x08ff] has been reserved
[ 0.684136] system 00:02: [io 0x0d00-0x0d7f] has been reserved
[ 0.684137] system 00:02: [io 0x0d80-0x0dff] has been reserved
[ 0.684138] system 00:02: [io 0x1100-0x117f] has been reserved
[ 0.684139] system 00:02: [io 0x1180-0x11ff] has been reserved
[ 0.684141] system 00:02: [mem 0x000d0000-0x000d3fff window] could not be reserved
[ 0.684143] system 00:02: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.684144] system 00:02: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.684145] system 00:02: [mem 0xfec80000-0x1fd93ffff] could not be reserved
[ 0.684147] system 00:02: [mem 0xfefe0000-0xfefe01ff] has been reserved
[ 0.684148] system 00:02: [mem 0xfefe1000-0xfefe1fff] has been reserved
[ 0.684150] system 00:02: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.684152] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.684314] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.684316] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.684317] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.684499] pnp 00:04: [dma 0 disabled]
[ 0.684541] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.684625] system 00:05: [io 0x0280-0x028f] has been reserved
[ 0.684627] system 00:05: [io 0x0290-0x029f] has been reserved
[ 0.684628] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.684682] system 00:06: [mem 0xfc000000-0xfdffffff] has been reserved
[ 0.684683] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.684851] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.684852] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.684854] system 00:07: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.684855] system 00:07: [mem 0xff380000-0xffffffff] could not be reserved
[ 0.684857] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.685072] pnp: PnP ACPI: found 8 devices
[ 0.690966] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.690991] clocksource: Switched to clocksource acpi_pm
[ 0.691021] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.691024] pci 0000:00:04.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.691029] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.691032] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.691035] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 0.691041] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.691042] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.691043] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.691044] pci_bus 0000:00: resource 7 [mem 0x80000000-0xff37ffff window]
[ 0.691046] pci_bus 0000:01: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.691047] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
[ 0.691048] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
[ 0.691049] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.691050] pci_bus 0000:01: resource 7 [mem 0x80000000-0xff37ffff window]
[ 0.691116] NET: Registered protocol family 2
[ 0.691302] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.691364] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.691446] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.691504] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.691522] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.691616] NET: Registered protocol family 1
[ 0.691765] RPC: Registered named UNIX socket transport module.
[ 0.691765] RPC: Registered udp transport module.
[ 0.691766] RPC: Registered tcp transport module.
[ 0.691766] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.692001] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 0.767938] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 0.768050] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.768091] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.768139] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.768184] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.768230] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.768278] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.768328] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.768381] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.768387] pci 0000:00:0d.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.768399] PCI: CLS 64 bytes, default 64
[ 0.808237] LVT offset 1 assigned for vector 0x400
[ 0.808247] IBS: LVT offset 1 assigned
[ 0.808313] perf: AMD IBS detected (0x0000001f)
[ 0.808561] Scanning for low memory corruption every 60 seconds
[ 0.808802] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.809062] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[ 0.810931] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.811134] NFS: Registering the id_resolver key type
[ 0.811141] Key type id_resolver registered
[ 0.811141] Key type id_legacy registered
[ 0.811144] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.812471] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.812475] io scheduler noop registered
[ 0.812521] io scheduler cfq registered (default)
[ 0.812809] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.812812] ACPI: Power Button [PWRB]
[ 0.812849] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.812850] ACPI: Power Button [PWRF]
[ 0.813123] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.833628] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.833950] Linux agpgart interface v0.103
[ 0.833976] [drm] Initialized
[ 0.833986] [drm] radeon kernel modesetting enabled.
[ 0.834057] [drm] amdgpu kernel modesetting enabled.
[ 0.836658] brd: module loaded
[ 0.836715] loop: module loaded
[ 0.838318] nbd: registered device at major 43
[ 0.840138] usbcore: registered new interface driver rtsx_usb
[ 0.840149] Loading iSCSI transport class v2.0-870.
[ 0.840298] iscsi: registered transport (tcp)
[ 0.840299] megasas: 06.811.02.00-rc1
[ 0.840531] sata_nv 0000:00:08.0: version 3.5
[ 0.840718] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 0.841116] scsi host0: sata_nv
[ 0.841268] scsi host1: sata_nv
[ 0.841310] ata1: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xd880 irq 21
[ 0.841311] ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 21
[ 0.841467] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[ 0.841784] scsi host2: sata_nv
[ 0.841851] scsi host3: sata_nv
[ 0.841878] ata3: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd000 irq 20
[ 0.841879] ata4: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 20
[ 0.841957] pata_amd 0000:00:06.0: version 0.4.1
[ 0.842562] scsi host4: pata_amd
[ 0.842627] scsi host5: pata_amd
[ 0.842654] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.842655] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.842862] tun: Universal TUN/TAP device driver, 1.6
[ 0.842862] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.842980] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 0.843004] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 0.843005] Copyright (c) 2007 Atheros Corporation.
[ 0.843093] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[ 0.843172] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[ 0.843181] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.843182] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.843192] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 0.843193] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.843203] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.843204] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.843217] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 0.843217] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 0.843228] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k
[ 0.843228] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 0.843284] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 0.843284] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 0.843294] jme: JMicron JMC2XX ethernet driver version 1.0.8
[ 0.843311] sky2: driver version 1.30
[ 0.843332] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.843517] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[ 1.311064] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.311069] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.313400] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB05, max UDMA/100
[ 1.313611] ata1.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
[ 1.313613] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.318088] ata3.00: configured for UDMA/100
[ 1.318318] ata1.00: configured for UDMA/133
[ 1.318635] scsi 0:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 0A80 PQ: 0 ANSI: 5
[ 1.354537] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.354592] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.354669] sd 0:0:0:0: [sda] Write Protect is off
[ 1.354671] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.354704] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.365178] sda: sda1 sda2
[ 1.365627] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.371688] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:25:22:73:1e:f1
[ 1.371691] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[ 1.371801] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.371802] ehci-pci: EHCI PCI platform driver
[ 1.371920] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 1.371925] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.371931] ehci-pci 0000:00:02.1: debug port 1
[ 1.371946] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 1.371966] ehci-pci 0000:00:02.1: irq 22, io mem 0xfbefec00
[ 1.384390] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.384835] hub 1-0:1.0: USB hub found
[ 1.384889] hub 1-0:1.0: 10 ports detected
[ 1.385259] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.385266] ohci-pci: OHCI PCI platform driver
[ 1.385370] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 1.385375] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 1.385402] ohci-pci 0000:00:02.0: irq 23, io mem 0xfbeff000
[ 1.443247] hub 2-0:1.0: USB hub found
[ 1.443254] hub 2-0:1.0: 10 ports detected
[ 1.443405] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.443443] usbcore: registered new interface driver uas
[ 1.443457] usbcore: registered new interface driver usb-storage
[ 1.443482] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.446577] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.446589] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.446746] mousedev: PS/2 mouse device common for all mice
[ 1.446970] rtc_cmos 00:00: RTC can wake from S4
[ 1.447182] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 1.447220] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram
[ 1.447232] i2c /dev entries driver
[ 1.447376] i2c i2c-0: nForce2 SMBus adapter at 0x600
[ 1.447420] i2c i2c-1: nForce2 SMBus adapter at 0x700
[ 1.447487] w83627ehf: Found W83627DHG-P chip at 0x290
[ 1.447773] sdhci: Secure Digital Host Controller Interface driver
[ 1.447773] sdhci: Copyright(c) Pierre Ossman
[ 1.447795] No iBFT detected.
[ 1.447805] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.448061] usbcore: registered new interface driver usbhid
[ 1.448062] usbhid: USB HID core driver
[ 1.448354] NET: Registered protocol family 10
[ 1.448620] NET: Registered protocol family 17
[ 1.448640] Key type dns_resolver registered
[ 1.448724] microcode: microcode updated early to new patch_level=0x010000c8
[ 1.448753] microcode: CPU0: patch_level=0x010000c8
[ 1.448770] microcode: CPU1: patch_level=0x010000c8
[ 1.448835] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.449354] Btrfs loaded, crc32c=crc32c-generic
[ 1.449545] console [netcon0] enabled
[ 1.449546] netconsole: network logging started
[ 1.449605] rtc_cmos 00:00: setting system clock to 2017-02-04 18:32:02 UTC (1486233122)
[ 1.449653] acpi_cpufreq: overriding BIOS provided _PSD data
[ 1.449758] ALSA device list:
[ 1.449759] No soundcards found.
[ 1.679049] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.680688] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB05 PQ: 0 ANSI: 5
[ 1.711179] sr 2:0:0:0: [sr0] scsi3-mmc drive: 0x/52x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.711184] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.711587] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.711810] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.831106] tsc: Refined TSC clocksource calibration: 2812.792 MHz
[ 1.831122] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x288b74ec016, max_idle_ns: 440795266460 ns
[ 1.944430] usb 2-5: new full-speed USB device number 2 using ohci-pci
[ 2.035654] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.035803] ata6: port disabled--ignoring
[ 2.039922] Freeing unused kernel memory: 4476K (ffffffff830d7000 - ffffffff83536000)
[ 2.039924] Write protecting the kernel read-only data: 32768k
[ 2.040699] Freeing unused kernel memory: 952K (ffff880001b12000 - ffff880001c00000)
[ 2.041768] Freeing unused kernel memory: 356K (ffff880002fa7000 - ffff880003000000)
[ 2.186118] input: Microsoft Microsoft® Nano Transceiver v2.1 as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/0003:045E:07A5.0001/input/input5
[ 2.241566] hid-generic 0003:045E:07A5.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v2.1] on usb-0000:00:02.0-5/input0
[ 2.250970] input: Microsoft Microsoft® Nano Transceiver v2.1 as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.1/0003:045E:07A5.0002/input/input6
[ 2.251566] hid-generic 0003:045E:07A5.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v2.1] on usb-0000:00:02.0-5/input1
[ 2.281341] input: Microsoft Microsoft® Nano Transceiver v2.1 as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.2/0003:045E:07A5.0003/input/input7
[ 2.337816] hid-generic 0003:045E:07A5.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v2.1] on usb-0000:00:02.0-5/input2
[ 2.634422] usb 2-6: new low-speed USB device number 3 using ohci-pci
[ 2.683736] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[ 2.684071] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
[ 2.685159] random: fast init done
[ 2.686086] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.706708] uvesafb:
[ 2.706713] NVIDIA Corporation,
[ 2.706715] MCP61 - mcp61-86,
[ 2.706716] Chip Rev ,
[ 2.706718] OEM: NVIDIA,
[ 2.706720] VBE v3.0
[ 2.784839] uvesafb: VBIOS/hardware doesn't support DDC transfers
[ 2.784842] uvesafb: no monitor limits have been set, default refresh rate will be used
[ 2.785630] uvesafb: scrolling: redraw
[ 2.844495] clocksource: Switched to clocksource tsc
[ 2.856393] Console: switching to colour frame buffer device 80x30
[ 2.857810] uvesafb: framebuffer at 0xe0000000, mapped to 0xffffc90006000000, using 24576k, total 262144k
[ 2.857812] fb0: VESA VGA frame buffer device
[ 2.874943] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/0003:046D:C521.0004/input/input8
[ 2.875157] hid-generic 0003:046D:C521.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-6/input0
[ 2.887372] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.1/0003:046D:C521.0005/input/input9
[ 2.941342] hid-generic 0003:046D:C521.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-6/input1
[ 3.178551] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
[ 3.178781] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
[ 3.225015] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.330418] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KM
OD -IDN)
[ 5.330548] systemd[1]: Detected architecture x86-64.
[ 5.330612] systemd[1]: Set hostname to <LibreELEC>.
[ 5.397278] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.397362] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.397376] systemd[1]: Reached target Swap.
[ 5.397423] systemd[1]: Listening on udev Control Socket.
[ 5.397447] systemd[1]: Listening on udev Kernel Socket.
[ 5.397480] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.397494] systemd[1]: Reached target Paths.
[ 5.532214] systemd-journald[223]: Received request to flush runtime journal from PID 1
[ 5.805329] random: crng init done
[ 6.117813] rc_core: loading out-of-tree module taints kernel.
[ 6.118041] WARNING: You are using an experimental version of the media stack.
[ 6.118041] As the driver is backported to an older kernel, it doesn't offer
[ 6.118041] enough quality for its usage in production.
[ 6.118041] Use it with care.
[ 6.118041] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 6.118041] a02ff2e02bee64e9955dbfd8811874c3f3880f58 cx231xx: Fix TBS MAC reading.
[ 6.122903] Linux video capture interface: v2.00
[ 6.122906] WARNING: You are using an experimental version of the media stack.
[ 6.122906] As the driver is backported to an older kernel, it doesn't offer
[ 6.122906] enough quality for its usage in production.
[ 6.122906] Use it with care.
[ 6.122906] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 6.122906] a02ff2e02bee64e9955dbfd8811874c3f3880f58 cx231xx: Fix TBS MAC reading.
[ 6.133740] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 6.133753] snd_hda_intel 0000:00:05.0: Disabling MSI
[ 6.143536] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded
[ 6.143764] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
[ 6.143794] saa7134: saa7134[0]: found at 0000:01:0a.0, rev: 1, irq: 19, latency: 32, mmio: 0xfbfffc00
[ 6.143798] saa7134: saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL [card=50,autodetected]
[ 6.143823] saa7134: saa7134[0]: board init: gpio is c806000
[ 6.329710] avahi-ml[274]: segfault at 0 ip 00007fa3a35d5966 sp 00007fa39c17daa8 error 4 in libc-2.24.so[7fa3a3557000+18f000]
[ 6.340383] saa7134: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
[ 6.340385] saa7134: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff
[ 6.340386] saa7134: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff
[ 6.340387] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6.340387] saa7134: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff
[ 6.340388] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6.340388] saa7134: i2c eeprom 60: 0c 22 17 44 03 0e d2 84 ff ff ff ff ff ff ff ff
[ 6.340389] saa7134: i2c eeprom 70: 00 30 8d 18 19 e5 ff ff 74 40 ff ff ff ff ff ff
[ 6.340389] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6.340390] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6.340390] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6.340391] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6.340391] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6.340392] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6.340392] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6.340393] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6.394634] tda9887 2-0043: creating new instance
[ 6.394636] tda9887 2-0043: tda988[5/6/7] found
[ 6.404379] tuner: 2-0043: Tuner 74 found with type(s) Radio TV.
[ 6.429475] TUNER: Unable to find symbol tea5767_autodetection()
[ 6.429480] tuner: 2-0060: Tuner -1 found with type(s) Radio TV.
[ 6.467729] mt20xx 2-0060: microtune: companycode=3cbf part=42 rev=22
[ 6.507897] mt20xx 2-0060: microtune MT2050 found, OK
[ 6.514514] nvidia: module license 'NVIDIA' taints kernel.
[ 6.514518] Disabling lock debugging due to kernel taint
[ 6.521427] forcedeth 0000:00:07.0 eth0: MSI enabled
[ 6.527991] 8021q: 802.1Q VLAN Support v1.8
[ 6.539047] NVRM: The NVIDIA GeForce 7025 / nForce 630a GPU installed in this system is
[ 6.539047] NVRM: supported through the NVIDIA 304.xx Legacy drivers. Please
[ 6.539047] NVRM: visit http://www.nvidia.com/object/unix.html for more
[ 6.539047] NVRM: information. The 340.101 NVIDIA driver will ignore
[ 6.539047] NVRM: this GPU. Continuing probe...
[ 6.539066] NVRM: No NVIDIA graphics adapter found!
[ 6.624533] saa7134: saa7134[0]: registered device video0 [v4l2]
[ 6.624577] saa7134: saa7134[0]: registered device vbi0
[ 6.630008] WARNING: You are using an experimental version of the media stack.
[ 6.630008] As the driver is backported to an older kernel, it doesn't offer
[ 6.630008] enough quality for its usage in production.
[ 6.630008] Use it with care.
[ 6.630008] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 6.630008] a02ff2e02bee64e9955dbfd8811874c3f3880f58 cx231xx: Fix TBS MAC reading.
[ 6.632653] saa7134_dvb: dvb_init() allocating 1 frontend
[ 6.647762] dvbdev: DVB: registering new adapter (saa7134[0])
[ 6.647772] saa7134 0000:01:0a.0: DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)...
[ 6.824848] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1705: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[ 6.824851] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.824853] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 6.824855] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
[ 6.824856] snd_hda_codec_via hdaudioC0D0: inputs:
[ 6.824858] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
[ 6.824860] snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
[ 6.824861] snd_hda_codec_via hdaudioC0D0: Line=0x1b
[ 6.824863] snd_hda_codec_via hdaudioC0D0: CD=0x1f
[ 7.975820] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
[ 7.975974] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
[ 7.976113] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input13
[ 36.158482] hrtimer: interrupt took 14054 ns
[ 37.003779] kodi.bin[681]: segfault at 40 ip 0000000000000040 sp 00007ffee8e76568 error 14 in kodi.bin[400000+1617000]Hardware:
lspci:
Code
LibreELEC:~ # lspci
00:00.0 RAM memory: NVIDIA Corporation MCP61 Host Bridge (rev a1)
00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3)
00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3)
00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 7025 / nForce 630a] (rev a2)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:0a.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01)df
Code
LibreELEC:~ # df
Filesystem 1K-blocks Used Available Use% Mounted on
devtmpfs 884940 199992 684948 23% /dev
/dev/sda1 499656 211044 278128 43% /flash
/dev/sda2 960784960 169840 960598736 0% /storage
/dev/loop0 200064 200064 0 100% /
tmpfs 888448 0 888448 0% /dev/shm
tmpfs 888448 6160 882288 1% /run
tmpfs 888448 0 888448 0% /sys/fs/cgroup
tmpfs 888448 88 888360 0% /var
tmpfs 888448 12 888436 0% /tmpcpuinfo
Code
LibreELEC:~ # cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 6
model name : AMD Athlon(tm) II X2 220 Processor
stepping : 3
microcode : 0x10000b6
cpu MHz : 2800.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save vmmcall
bugs : tlb_mmatch fxsave_leak sysret_ss_attrs
bogomips : 5627.58
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 1
vendor_id : AuthenticAMD
cpu family : 16
model : 6
model name : AMD Athlon(tm) II X2 220 Processor
stepping : 3
microcode : 0x10000b6
cpu MHz : 1600.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save vmmcall
bugs : tlb_mmatch fxsave_leak sysret_ss_attrs
bogomips : 5627.58
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstateGPU: GeForce 7025/ nForce 630a
nVidia (onBoard)
Mainboard: asRock N68C-S
RAM: 2GB DDR2
With the position above in dmesg the system halts on error, last line in dmesg leaves same message after 30 seconds.
Problem got in 7.90.010 (Alpha), 7.95.1 and 7.95.2. Set the system back to 7.0.3 stable did make the system work again.
