MXQ pro 4k won't start

    Hi,
    First, excuse my english.
    I own a MXQ pro 4k tv box.
    I've tried Libreelec 7.02 on SD card and it worked fine. So I installed it with "installtointernal" command.
    It worked fine again.
    Then i've wanted to update with the 7.03, i put the img and dtb in the good directory and reboot the box.
    I've seen the install lines on my screen but after the last reboot my box stay on the amlogic picture.
    If i use the sd card, Librelec starts.
    I've tried a new install but same trouble.
    So, could you help me to install Librelec in internal memory?

    (please could you answer to me without acronym and specialized words ;) ...)

    thanx

    Mate, please read the forum, especially, the 7.03 thread!

    It is said well over hundred times, that 006, 007 and 008
    are working fine on S905 and S905x, but 009 and 010 are
    having boot issues on certain boxes (especially, with S905).

    So, stick to 008 (or 009, if that works on your box) until a
    solution for 010 (or 009) is present!

    Greetings


    Btw, I am owning a Nexbox Ott Box MXQ 4K Pro, too.

    Edited once, last by sYCO (December 15, 2016 at 8:52 AM).


    sYCO thank you for your reply.
    Now i know!

    Even if it's said hundred times, I swear to you that it is difficult to find the good information when your knowledge are poor in english.

    But thank you so much.

    hi i cant get mine to work too i have the same box mxq pro 4k still no luck can you provide me the detail you used to make it boot from internal thanks ?

    Hi there,

    I have a MXQ Pro 4K box and i'm trying to run LE from the SD card. I'm using 7.2.008. Every time I push the reset button in for 10, it boots into Android Recovery. In there I can click reboot to bootloader but then the screen goes blank.

    Anyone got any ideas to run from SD card??

    Cheers.

    I had the same troubles. To be honest, I do not remember,
    how I solved the situation.

    But I can tell you I used the 008 build and Rufus or the Libreelec
    tool to flash SEVERAL times the SD card with the correct dtb file
    and in the end it worked.

    You can also try 012c now WITH disabled temperature sensor.
    It works on my box, too.

    Edited once, last by sYCO (January 15, 2017 at 4:22 PM).

    Quote from kodiuser1


    Hi there,

    I have a MXQ Pro 4K box and i'm trying to run LE from the SD card. I'm using 7.2.008. Every time I push the reset button in for 10, it boots into Android Recovery. In there I can click reboot to bootloader but then the screen goes blank.

    Anyone got any ideas to run from SD card??

    Cheers.


    Here
    Here

    Edited once, last by pyhonin28 (January 16, 2017 at 1:19 AM).