[Orange Pi PC Plus] No Audio, No Control

I have Orange PC Plus and Firstly I installed 12.0.2 LibreELEC and when I connected TV and I didn't hear sound and couldn't control it. But if I switch HDMI port on TV everything works. I read there it can be problem in 12.0.2.

I installed 11.0.6 and them updated to 12.0.1(because 12.0.1 only works after the update, when I installed 12.0.1 Orange wouldn't boot).

Today I turned on TV and Orange and LibreELEC didn't see TV and TV resolution was 1024x768, no sound. I restarted Orange but nothing changed.

https://paste.libreelec.tv/alive-cicada.log - this log when LibreELEC doesn't see TV

When I unplug HDMI on Orange and plug again. LibreELEC said Connected TV, but sound wasn't and LibreELEC resolution list wasn't change.

https://paste.libreelec.tv/game-ox.log - this log Unplug and plug HDMI

Then I restarted Orange again. I could see the correct TV resolution, when LibreELEC booted, the TV resolution was 1920x1080 and the sound was on.

https://paste.libreelec.tv/funny-longhorn.log - After restart

What's problem?

Also I want to ask about WIFI and emmc. Why LibreELEC doesn't see WIFI and emmc in Orange PC Plus?

https://paste.libreelec.tv/exciting-dassie.log - LibreELEC doesn't see TV with debug

Unplugging and plugging HDMI on Orange doesn't always work but I power off and power on TV. LibreELEC showed Connected TV but I restarted LibreELEC and nothing change.

https://paste.libreelec.tv/enormous-kiwi.log - Debug log after TV on

I think I found a problem. I have 3 HDMI. 2 HDMI are 2m and 1 HDMI = 1.5m. 2m HDMI use for TVs and 1.5m HDMI uses for PC.

If Orange PC+ use 1.5m it's all ok, but 2m have this problem. I asked chatGPT about it and chatGPT said if 2m has 1+ Ohm it's bad a cable.

Who has 2m or more HDMI cable can you check it? I checked 18 pin it's power pin.

I see. It means my 2m cables have 3.5Ohm and it's so bad.

Quote from VLouis

So, start the TV first, then the LE device. In that case the solution could be to run the "getedid create" command https://wiki.libreelec.tv/configuration/edid#getedid-create

I read that and tried it doesn't work. Also yesterday I tried to measure voltage on 18 pin HDMI cable. I didn't see something bad. Orange always gave 5.11v.