RK3399 (eg: NanoPC T4) has stopped working after Kernel 6.x

ihipop · December 10, 2024 at 3:22 AM

Moved from here https://github.com/LibreELEC/LibreELEC.tv/issues/9562

Describe the bug

RK3399 (eg: NanoPC T4) has stopped working after Kernel 6.x
No HDMI output and boot

How to reproduce

Steps to reproduce the behavior:

Go to https://libreelec.tv/downloads/rockchip/ or https://test.libreelec.tv/13.0/Rockchip/nanopc-t4/
Download LE13 nightlies / LibreELEC 12.0 / LibreELEC 11.0 which has Kernel 6.x inside, burn it to an sd card, and boot from it
NO HDMI output. There is no boot either, even the empty space of SD card has not been expanded, so there is no SSH access

Information

LibreELEC Version: 12.0 / 11.0 / LE13 nightlies
Hardware Platform: NanoPC T4

Log file

No log because I can't ssh into it because of the failure of the boot

Context

LibreELEC 10.0 which has kernel 5.x works

**chewitt** · December 10, 2024 at 4:10 AM

You need to share the u-boot (early stage boot) serial uart output. This will either show what stage of boot something fails at, or nothing which indicates a more fundamental u-boot compile/packaging issue.

ihipop · December 10, 2024 at 4:41 AM

Quote from chewitt

You need to share the u-boot (early stage boot) serial uart output. This will either show what stage of boot something fails at, or nothing which indicates a more fundamental u-boot compile/packaging issue.

I will order a TTL to USB adaptor , it will take days, when it's ready, I will paste the TTL log here

It just amazes me that after two stable releases, no one noticed it even can't boot

ihipop · December 12, 2024 at 3:06 AM

Quote from chewitt

You need to share the u-boot (early stage boot) serial uart output. This will either show what stage of boot something fails at, or nothing which indicates a more fundamental u-boot compile/packaging issue.

UART/TTL log of Libreelec 12

Code

DDR Version 1.27 20211018
In
Channel 0: LPDDR3, 800MHz
CS = 0
MR0=0x58
MR1=0x58
MR2=0x58
MR3=0x58
MR4=0x2
MR5=0x1
MR6=0x16
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
CS = 1
MR0=0x58
MR1=0x58
MR2=0x58
MR3=0x58
MR4=0x2
MR5=0x1
MR6=0x16
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=2048MB
Channel 1: LPDDR3, 800MHz
CS = 0
MR0=0x58
MR1=0x58
MR2=0x58
MR3=0x58
MR4=0x2
MR5=0x1
MR6=0x16
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
CS = 1
MR0=0x58
MR1=0x58
MR2=0x58
MR3=0x58
MR4=0x2
MR5=0x1
MR6=0x16
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=2048MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
ch 1 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg[2] = 0x3AA0DAA0, stride = 0xD
OUT
Boot1 Release Time: May 29 2020 17:36:36, version: 1.26
CPUId = 0x0
ChipType = 0x10, 342
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=60874MB
FwPartOffset=2000 , 0
StorageInit ok = 295894
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:  0, name:            uboot, start:0x4000, size:0x2000
GPT part:  1, name:            trust, start:0x6000, size:0x2000
GPT part:  2, name:             misc, start:0x8000, size:0x2000
GPT part:  3, name:             dtbo, start:0xa000, size:0x2000
GPT part:  4, name:         resource, start:0xc000, size:0x8000
GPT part:  5, name:           kernel, start:0x14000, size:0x14000
GPT part:  6, name:             boot, start:0x28000, size:0x18000
GPT part:  7, name:           rootfs, start:0x40000, size:0x7e0000
GPT part:  8, name:         userdata, start:0x820000, size:0x6ec4fdf
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000.
Trust Addr:0x6000, 0x0
Trust Addr:0x6400, 0x0
Trust Addr:0x6800, 0x0
Trust Addr:0x6c00, 0x0
Trust Addr:0x7000, 0x0
Trust Addr:0x7400, 0x0
Trust Addr:0x7800, 0x0
Trust Addr:0x7c00, 0x0
Addr:0x6000 No find trust.img!
LoadTrustBL error:-3
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = -2, SecureMode = 0

Display More

Then it hangs

ihipop · December 12, 2024 at 3:54 AM

The log of LibreELEC 13 nightly

Please Note that I have an official Android installed in the internal eMMC , so the boot sequence directly failed and it booted into the Android in eMMC directly

this only happens with LibreELEC 13 nightly in SDCard, LibreELEC 12 will get stuck, and LibreELEC 10 will boot successfully

Code: Directly boot into android

DDR Version 1.27 20211018
In
Channel 0: LPDDR3, 800MHz
CS = 0
MR0=0x58
MR1=0x58
MR2=0x58
MR3=0x58
MR4=0x3
MR5=0x1
MR6=0x16
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
CS = 1
MR0=0x58
MR1=0x58
MR2=0x58
MR3=0x58
MR4=0x3
MR5=0x1
MR6=0x16
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=2048MB
Channel 1: LPDDR3, 800MHz
CS = 0
MR0=0x58
MR1=0x58
MR2=0x58
MR3=0x58
MR4=0x3
MR5=0x1
MR6=0x16
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
CS = 1
MR0=0x58
MR1=0x58
MR2=0x58
MR3=0x58
MR4=0x3
MR5=0x1
MR6=0x16
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=2048MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
ch 1 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg[2] = 0x3AA0DAA0, stride = 0xD
OUT
Boot1 Release Time: May 29 2020 17:36:36, version: 1.26
CPUId = 0x0
ChipType = 0x10, 341
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=3776MB
FwPartOffset=2000 , 0
StorageInit ok = 910536
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x3335db8 signature is wrong
recovery gpt...
GPT 0x3335db8 signature is wrong
recovery gpt fail!
Trust Addr:0x4000, 0x0
Trust Addr:0x4400, 0x0
Trust Addr:0x4800, 0x0
Trust Addr:0x4c00, 0x0
Trust Addr:0x5000, 0x0
Trust Addr:0x5400, 0x0
Trust Addr:0x5800, 0x0
Trust Addr:0x5c00, 0x0
Addr:0x4000 No find trust.img!
LoadTrustBL error:-3
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:  0, name:          uboot_a, start:0x4000, size:0x2000
GPT part:  1, name:          uboot_b, start:0x6000, size:0x2000
GPT part:  2, name:          trust_a, start:0x8000, size:0x2000
GPT part:  3, name:          trust_b, start:0xa000, size:0x2000
GPT part:  4, name:             misc, start:0xc000, size:0x2000
GPT part:  5, name:              dtb, start:0xe000, size:0x2000
GPT part:  6, name:           dtbo_a, start:0x10000, size:0x2000
GPT part:  7, name:           dtbo_b, start:0x12000, size:0x2000
GPT part:  8, name:         vbmeta_a, start:0x14000, size:0x1000
GPT part:  9, name:         vbmeta_b, start:0x15000, size:0x1000
GPT part: 10, name:           boot_a, start:0x16000, size:0x20000
GPT part: 11, name:           boot_b, start:0x36000, size:0x20000
GPT part: 12, name:           backup, start:0x56000, size:0x30000
GPT part: 13, name:         security, start:0x86000, size:0x2000
GPT part: 14, name:            cache, start:0x88000, size:0xc0000
GPT part: 15, name:         metadata, start:0x148000, size:0x8000
GPT part: 16, name:              frp, start:0x150000, size:0x2000
GPT part: 17, name:            super, start:0x152000, size:0x800000
GPT part: 18, name:         userdata, start:0x952000, size:0x13ccfdf
find part:misc OK. first_lba:0xc000.
slot priority:15, tries_remaining:0, successful_boot:1
slot priority:14, tries_remaining:7, successful_boot:0
find part:trust_a OK. first_lba:0x8000.
find part:uboot_a OK. first_lba:0x4000.
Trust Addr:0x8000, 0x58334c42
No find bl30.bin
Load uboot, ReadLba = 4000
Load OK, addr=0x200000, size=0xf6e90
RunBL31 0x40000 @ 989487 us
NOTICE:  BL31: v1.3(release):845ee93
NOTICE:  BL31: Built : 15:51:11, Jul 22 2020
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1196): pd status 3e
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-256-gebb61ff5 #4 Wed Apr 22 01:34:02 UTC 2020 aarch64)

INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09 (Oct 19 2023 - 16:22:07 +0800)

Board: NanoPC-T4
PreSerial: 2
DRAM:  3.8 GiB
Sysmem: init
Relocation Offset: f5bcd000, fdt: f3dc1418
Using default environment

mmc@fe320000: 1, sdhci@fe330000: 0
Bootdev(atags): mmc 0
MMC0: HS400, 150Mhz
PartType: EFI
A/B-slot: _a, successful: 1, tries-remain: 0
Android 10.0, Build 2020.7
Found DTB in boot_a part
DTB: rk3399-nanopi4-rev00.dtb (108490)
HASH(c): OK
boot mode: None
ANDROID: fdt overlay OK
I2c0 speed: 400000Hz
PMIC:  RK808 
vdd_center 900000 uV
vdd_cpu_l 900000 uV
vccio_sd init 3000000 uV
vdd_log 900000 uV
I2c2 speed: 200000Hz
Rockchip UBOOT DRM driver version: v1.0.1
I2c7 speed: 100000Hz
Monitor has basic audio support
Could not find baseparameter partition
mode: 3840x2160
CEA mode used vic=97
final pixclk = 594000000 tmdsclk = 594000000
PHY powered down in 0 iterations
PHY PLL locked 1 iterations
PHY powered down in 0 iterations
PHY PLL locked 1 iterations
sink has audio support
hdmi_set_clk_regenerator: fs=48000Hz ftdms=594.000MHz N=10240 cts=990000
AUX CH error happens: 2
AUX CH error happens: 2
AUX CH error happens: 2
AUX CH error happens: 2
AUX CH error happens: 2
AUX CH error happens: 2
AUX CH error happens: 2
AUX CH error happens: 2
AUX CH error happens: 2
failed to get edid
failed to find display timing
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  aplll 816000 KHz
  apllb 816000 KHz
  dpll 800000 KHz
  cpll 24000 KHz
  gpll 800000 KHz
  npll 600000 KHz
  vpll 594000 KHz
  aclk_perihp 133333 KHz
  hclk_perihp 66666 KHz
  pclk_perihp 33333 KHz
  aclk_perilp0 266666 KHz
  hclk_perilp0 88888 KHz
  pclk_perilp0 44444 KHz
  hclk_perilp1 100000 KHz
  pclk_perilp1 50000 KHz

Net:   eth0: ethernet@fe300000
Hit key to stop autoboot('CTRL+C'):  0 
ANDROID: reboot reason: "(none)"
Vboot=0, AVB images, AVB verify
read_is_device_unlocked() ops returned that device is UNLOCKED
avb_slot_verify.c:753: ERROR: vbmeta_a: Error verifying vbmeta image: OK_NOT_SIGNED
get image from preloaded partition...
Could not find "system_a" partition
Booting IMAGE kernel at 0x00280000 with fdt at 0x08300000...


Fdt Ramdisk skip relocation
## Booting Android Image at 0x0027f800 ...
Kernel load addr 0x00280000 size 24461 KiB
RAM disk load addr 0x0a200000 size 14009 KiB
## Flattened Device Tree blob at 08300000
   Booting using the fdt blob at 0x8300000
   XIP Kernel Image from 0x00280000 to 0x00280000 ... OK
  'reserved-memory' ramoops@110000: addr=110000 size=f0000
   Using Device Tree in place at 0000000008300000, end 000000000831d9e8
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x0a200000 - 0xf8000000 (size: 0xede00000)
Total: 2163.260 ms

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 4.19.111 (fa@jensen) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05)) #3 SMP PREEMPT Thu Oct 19 16:22:19 CST 2023
[    0.000000] Machine model: FriendlyElec NanoPC-T4
[    0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
[    0.000000] bootconsole [uart8250] enabled
[    0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'stb-devinfo@00000000': base 0x0000000000000000, size 0 MiB
[    0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 23 pages/cpu s57304 r8192 d28712 u94208
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 991752
[    0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal androidboot.dtbo_idx=0  androidboot.verifiedbootstate=orange androidboot.slot_suffix=_a androidboot.serialno=RWW3ZEKLW1 androidboot.force_normal_boot=1 console=ttyFIQ0 androidboot.baseband=N/A androidboot.wificountrycode=US androidboot.veritymode=enforcing androidboot.hardware=rk30board androidboot.console=ttyFIQ0 androidboot.verifiedbootstate=orange firmware_class.path=/vendor/etc/firmware init=/init rootwait ro loop.max_part=7 androidboot.selinux=permissive buildvariant=userdebug earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 coherent_pool=1m androidboot.boot_devices=fe330000.sdhci
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 3897224K/4030464K available (13630K kernel code, 1676K rwdata, 5252K rodata, 3840K init, 2194K bss, 116856K reserved, 16384K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f1480000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x00000000f1420000
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x00000000f1430000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] random: random: get_random_bytes called from start_kernel+0x36c/0x4ec with crng_init=0
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
......................

Display More

If I interrupt the boot sequence with ctrl+c and interact with the uBoot, force it to boot from mmc1

Code

DDR Version 1.27 20211018
In
soft reset
SRX
Channel 0: LPDDR3, 800MHz
CS = 0
MR0=0x58
MR1=0x58
MR2=0x58
MR3=0x58
MR4=0x3
MR5=0x1
MR6=0x16
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
CS = 1
MR0=0x58
MR1=0x58
MR2=0x58
MR3=0x58
MR4=0x3
MR5=0x1
MR6=0x16
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=2048MB
Channel 1: LPDDR3, 800MHz
CS = 0
MR0=0x58
MR1=0x58
MR2=0x58
MR3=0x58
MR4=0x3
MR5=0x1
MR6=0x16
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
CS = 1
MR0=0x58
MR1=0x58
MR2=0x58
MR3=0x58
MR4=0x3
MR5=0x1
MR6=0x16
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=2048MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
ch 1 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg[2] = 0x3AA0DAA0, stride = 0xD
OUT
Boot1 Release Time: May 29 2020 17:36:36, version: 1.26
CPUId = 0x0
ChipType = 0x10, 430
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=3776MB
FwPartOffset=2000 , 0
StorageInit ok = 418214
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x3335db8 signature is wrong
recovery gpt...
GPT 0x3335db8 signature is wrong
recovery gpt fail!
Trust Addr:0x4000, 0x0
Trust Addr:0x4400, 0x0
Trust Addr:0x4800, 0x0
Trust Addr:0x4c00, 0x0
Trust Addr:0x5000, 0x0
Trust Addr:0x5400, 0x0
Trust Addr:0x5800, 0x0
Trust Addr:0x5c00, 0x0
Addr:0x4000 No find trust.img!
LoadTrustBL error:-3
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:  0, name:          uboot_a, start:0x4000, size:0x2000
GPT part:  1, name:          uboot_b, start:0x6000, size:0x2000
GPT part:  2, name:          trust_a, start:0x8000, size:0x2000
GPT part:  3, name:          trust_b, start:0xa000, size:0x2000
GPT part:  4, name:             misc, start:0xc000, size:0x2000
GPT part:  5, name:              dtb, start:0xe000, size:0x2000
GPT part:  6, name:           dtbo_a, start:0x10000, size:0x2000
GPT part:  7, name:           dtbo_b, start:0x12000, size:0x2000
GPT part:  8, name:         vbmeta_a, start:0x14000, size:0x1000
GPT part:  9, name:         vbmeta_b, start:0x15000, size:0x1000
GPT part: 10, name:           boot_a, start:0x16000, size:0x20000
GPT part: 11, name:           boot_b, start:0x36000, size:0x20000
GPT part: 12, name:           backup, start:0x56000, size:0x30000
GPT part: 13, name:         security, start:0x86000, size:0x2000
GPT part: 14, name:            cache, start:0x88000, size:0xc0000
GPT part: 15, name:         metadata, start:0x148000, size:0x8000
GPT part: 16, name:              frp, start:0x150000, size:0x2000
GPT part: 17, name:            super, start:0x152000, size:0x800000
GPT part: 18, name:         userdata, start:0x952000, size:0x13ccfdf
find part:misc OK. first_lba:0xc000.
slot priority:15, tries_remaining:0, successful_boot:1
slot priority:14, tries_remaining:7, successful_boot:0
find part:trust_a OK. first_lba:0x8000.
find part:uboot_a OK. first_lba:0x4000.
Trust Addr:0x8000, 0x58334c42
No find bl30.bin
Load uboot, ReadLba = 4000
Load OK, addr=0x200000, size=0xf6e90
RunBL31 0x40000 @ 500764 us
NOTICE:  BL31: v1.3(release):845ee93
NOTICE:  BL31: Built : 15:51:11, Jul 22 2020
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1196): pd status 3e
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-256-gebb61ff5 #4 Wed Apr 22 01:34:02 UTC 2020 aarch64)

INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09 (Oct 19 2023 - 16:22:07 +0800)

Board: NanoPC-T4
PreSerial: 2
DRAM:  3.8 GiB
Sysmem: init
Relocation Offset: f5bcd000, fdt: f3dc1418
Using default environment

mmc@fe320000: 1, sdhci@fe330000: 0
Bootdev(atags): mmc 0
MMC0: HS400, 150Mhz
PartType: EFI
A/B-slot: _a, successful: 1, tries-remain: 0
Android 10.0, Build 2020.7
Found DTB in boot_a part
DTB: rk3399-nanopi4-rev00.dtb (108490)
HASH(c): OK
boot mode: normal
ANDROID: fdt overlay OK
I2c0 speed: 400000Hz
PMIC:  RK808 
vdd_center 900000 uV
vdd_cpu_l 900000 uV
vccio_sd init 3000000 uV
vdd_log 900000 uV
I2c2 speed: 200000Hz
Rockchip UBOOT DRM driver version: v1.0.1
I2c7 speed: 100000Hz
Monitor has basic audio support
Could not find baseparameter partition
mode: 3840x2160
CEA mode used vic=97
final pixclk = 594000000 tmdsclk = 594000000
PHY powered down in 0 iterations
PHY PLL locked 1 iterations
PHY powered down in 0 iterations
PHY PLL locked 1 iterations
sink has audio support
hdmi_set_clk_regenerator: fs=48000Hz ftdms=594.000MHz N=10240 cts=990000
AUX CH error happens: 2
AUX CH error happens: 2
AUX CH error happens: 2
AUX CH error happens: 2
AUX CH error happens: 2
AUX CH error happens: 2
AUX CH error happens: 2
AUX CH error happens: 2
AUX CH error happens: 2
failed to get edid
failed to find display timing
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  aplll 816000 KHz
  apllb 816000 KHz
  dpll 800000 KHz
  cpll 24000 KHz
  gpll 800000 KHz
  npll 600000 KHz
  vpll 594000 KHz
  aclk_perihp 133333 KHz
  hclk_perihp 66666 KHz
  pclk_perihp 33333 KHz
  aclk_perilp0 266666 KHz
  hclk_perilp0 88888 KHz
  pclk_perilp0 44444 KHz
  hclk_perilp1 100000 KHz
  pclk_perilp1 50000 KHz

Net:   eth0: ethernet@fe300000
Hit key to stop autoboot('CTRL+C'):  0 

nanopi4# printenv
arch=arm
baudrate=1500000
board=nanopi4
board_name=nanopi4
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}extlinux/extlinux.conf
boot_net_usb_start=usb start
boot_prefixes=/ /boot/
boot_script_dhcp=boot.scr.uimg
boot_scripts=boot.scr.uimg boot.scr
boot_targets=mmc1 mmc0 usb0 pxe dhcp 
bootargs=storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal androidboot.dtbo_idx=0
bootcmd=boot_android ${devtype} ${devnum};bootrkp;run distro_bootcmd;
bootcmd_dhcp=run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci;
bootcmd_mmc0=setenv devnum 0; run mmc_boot
bootcmd_mmc1=setenv devnum 1; run mmc_boot
bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi
bootcmd_usb0=setenv devnum 0; run usb_boot
bootdelay=1
cpu=armv8
cpuid#=5447314d31312e3030000000000c8582
devnum=0
devtype=mmc
distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
dtb_name=rk3399-nanopi4-rev00.dtb
efi_dtb_prefixes=/ /dtb/ /dtb/current/
eth1addr=e2:4a:02:ef:fd:3c
ethaddr=e2:4a:24:c6:ca:9c
fdt_addr_r=0x08300000
kernel_addr_r=0x00280000
load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile}
mmc_boot=if mmc dev ${devnum}; then setenv devtype mmc; run scan_dev_for_boot_part; fi
partitions=uuid_disk=${uuid_gpt_disk};name=loader1,start=32K,size=4000K,uuid=${uuid_gpt_loader1};name=loader2,start=8MB,size=4MB,uuid=${uuid_gpt_loader2};name=trust,size=4M,uuid=${uuid_gpt_atf};name=boot,size=112M,bootable,uuid=${uuid_gpt_boot};name=rootfs,size=-,uuid=B921B045-1DF0-41C3-AF44-4C6F280D3FAE;
pxefile_addr_r=0x00600000
ramdisk_addr_r=0x0a200000
rkimg_bootdev=if mmc dev 1 && rkimgtest mmc 1; then setenv devtype mmc; setenv devnum 1; echo Boot from SDcard;elif mmc dev 0; then setenv devtype mmc; setenv devnum 0;elif rksfc dev 1; then setenv devtype spinor; setenv devnum 1;fi; 
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done
scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}extlinux/extlinux.conf; then echo Found ${prefix}extlinux/extlinux.conf; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scriptaddr=0x00500000
serial#=RWW3ZEKLW1
soc=rockchip
stderr=serial,vidconsole
stdout=serial,vidconsole
usb_boot=usb start; if usb dev ${devnum}; then setenv devtype usb; run scan_dev_for_boot_part; fi
vendor=rockchip

Environment size: 4380/32764 bytes

nanopi4# run bootcmd_mmc0
switch to partitions #0, OK
mmc0(part 0) is current device
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **

nanopi4# run bootcmd_mmc1
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
reading /extlinux/extlinux.conf
228 bytes read in 6 ms (37.1 KiB/s)
1:      LibreELEC
Retrieving file: /KERNEL
reading /KERNEL
23902216 bytes read in 1622 ms (14.1 MiB/s)
append: boot=UUID=1212-5249 disk=UUID=8be28f2d-1b5d-4362-9cb6-b8e5d3585b03 quiet console=uart8250,mmio32,0xff1a0000 console=tty0 coherent_pool=2M cec.debounce_ms=5000
Retrieving file: /rk3399-nanopc-t4.dtb
reading /rk3399-nanopc-t4.dtb
83124 bytes read in 11 ms (7.2 MiB/s)
Fdt Ramdisk skip relocation
## Flattened Device Tree blob at 08300000
   Booting using the fdt blob at 0x8300000
   Using Device Tree in place at 0000000008300000, end 00000000083174b3
can't found rockchip,drm-logo, use rockchip,fb-logo
WARNING: could not set reg FDT_ERR_BADOFFSET.
failed to reserve fb-loader-logo memory
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x0a200000 - 0xf8000000 (size: 0xede00000)
Total: 39890.768 ms

Starting kernel ...

[    1.303223] rockchip-pcie f8000000.pcie: PCIe link trainin g gen1 timeout!
[    1.304020] rockchip-pcie f8000000.pcie: probe with driver rockchip-pcie failed with error -110

Display More

ihipop · December 13, 2024 at 9:44 AM

PostS12

I've tried many versions of images

Those Don't work

Official LE 12,11, nightly won't boot, most SD cards get stuck at

Code

SecureInit ret = -2, SecureMode = 0

a few SD cards directly boot the system on the internal eMMC

What works:

1. balbes150 's unofficial LE , which is Kernel 6.x too, works with all SD cards on my hands

Thread

Unofficial LE for RK356x RK3328\RK3399 RK3588(s)

These are not official test images for the RK33xx and rk356x rk3588(s).

Pay attention. Starting from version (20200826), the configuration order for the used DTB changes.

Please note that the algorithm for initial configuration of the system for startup has changed. Instead of a file "uEnv.txt", the file "/extlinux/extlinux.conf " is now used. The rules for editing a file remain the same.

~~After writing the image, you must correctly configure the DTB used in the file uEnv.txt~~

kernel 5.

Images rk3328…

balbes150

November 25, 2019 at 12:41 PM

2. Official LE 10

**ilmich** · December 15, 2024 at 6:04 PM Best Answer

Rockchip CPUs, if they find a bootloader in the internal memory, start with that and possibly try to launch the operating system from the SD card.

but if I remember correctly your vendor's bootloader (which is the one you have with the Android installation) is not able to launch the mainline bootloader (which is the one used starting from libreelec 11) and vice versa. you can see this from the fact that libreelec 10 works instead (because it has the vendor rockchip bootloader) and also the unofficial builds you mentioned.

more information can be found here

Boot option - Rockchip open source Document

the only options I know of are

- install libreelec in your emmc
- delete your emmc so that the board, finding nothing in the internal memory, boots entirely from the SD card

ihipop · December 16, 2024 at 10:08 AM

ilmich Thanks for your kind reply

After I erase the internal eMmc with dd , LE 12 boots successfully

But I still have some questions:

LibreELEC 11.0 uses kernel 6.1.x (not mainline), LibreELEC 12.0 uses kernel 6.6.x (not mainline)

while balbes150 's unOfficial LE uses kernel 6.12.3 (latest stable) , it can boot successfully, so which means it uses a vendor rockchip bootloader?

so,may I have any idea about why the Official LE not to use the a vendor rockchip bootloader ?

Is there any official way to install LE to the internal eMMC ?

**ilmich** · December 16, 2024 at 10:46 AM

Quote from ihipop

LibreELEC 11.0 uses kernel 6.1.x (not mainline), LibreELEC 12.0 uses kernel 6.6.x (not mainline)

Libreelec uses the latest LTS version of the mainline kernel (i.e., the official one, not the RockChip one), which is available when the stable version is released.

The 6.12 kernel will (probably) be used in libreelec 13, which is currently still in development.

Quote from ihipop

Is there any official way to install LE to the internal eMMC ?

Official no, so if you have problems (in reality, it's very unlikely that you have them), you may not have support. But if you want to install it in your internal emmc, just write an image of Libreelec (previously saved on a SD card) with dd after starting it from the SD card.

**ilmich** · December 16, 2024 at 10:54 AM

Quote from ihipop

while balbes150 's unOfficial LE uses kernel 6.12.3 (latest stable) , it can boot successfully, so which means it uses a vendor rockchip bootloader?

I don't know where to find the source of those builds but I imagine yes

ihipop · December 17, 2024 at 1:50 AM

https://opensource.rock-chips.com/images/c/cd/Rockchip_bootflow20181122.jpg

are we using Boot Flow 2?

So, may I know why the Official LE does not use a vendor rock chip bootloader?

Is there any performance or compatible reason?

**chewitt** · December 17, 2024 at 7:59 AM

Quote from ihipop

So, may I know why the Official LE does not use a vendor rock chip bootloader?

LE packaging assumes we are the sole OS being installed on a device (so we don't need to consider other OS bootloaders) and we choose to use and champion upstream open-source codebases whenever possible. RK3399 is well supported by current u-boot so there is no need for our releases to use vendor sources.