Black Screen on boot v7.90.009 v7.90.008

Issue: Black screen on boot with only cursor visible (apparently KODI is not booting).
LibreELEC versions: v7.90.009 and v7.90.008
Hardware: Asrock BeeBox 3150

I've been running the Milhouse test builds from the http://KODI.tv/forum with good results, updating and testing approximately once a month.

I first noticed the above issue with Milhouse's final KODI 17.0 Krypton build #1129.

I then tested with official alphas v7.90.009 and v7.90.008 and encountered the same issue.

The most recent previous build I had tested successfully was Milhouse #1025. I have since retested with Milhouse versions # 0815, # 0920, & #1025, all without this problem.

I am unaware how to capture a debug log when the problem occurs, since KODI is not booting.

Attached is dmesg output captured from Milhouse # 0920.

NOTE: When changing versions after the problem occurs I am repairing my original openelec install via the openelec installation flash drive and then updating using the LibreELEC .tar.

Thanks for your attention and efforts on LibreELEC!

Quote from eightball70

Had the same problem and was able to solve it with this thread: Rpi3 Update from v7.90.006 to v7.90.007 hangs in splash screen

Thanks. But I don't believe it is the same issue, as I never see the splash screen as you did, just totally black screen with mouse cursor, which I can move with track pad. No response to any other keyboard or button input I've tried.

Thanks for the quick responses everybody. Executed both of milhouse's rms. Copied v7.90.009 tar to storage/update. Rebooted. All good now!