[RPi4] Graphic (resolution) errror on new installation

wahlterh · October 20, 2024 at 11:33 AM New

Hi.

I had an error with my SD card an got new one (RPi 4).

When I installed ver 12 and tested on my amp w. hdmi + TV I got a weird resolution and I can not change it.

So I tested the old version I used to have before (ver 9) and all is great!

What happend? How do I resolve it?

Should I stay with ver 9?

**chewitt** · October 20, 2024 at 5:40 PM New

Up to you on what version you use, but LE12 has quite a few improvements for RPi4/5 hardware over LE 9.2.8. It's hard to guess at what "weird resolution" means so better to share a Kodi debug log.

wahlterh · October 20, 2024 at 6:06 PM New

4:3 576p is the higest with v10, v11 and v12.

With v9 16:9 1920x1080@60, as default.

**chewitt** · October 20, 2024 at 7:07 PM New

Please provide a full debug log.

How to post a log (wiki)

1. Enable debugging in Settings>System Settings>Logging
2. Restart Kodi
3. Replicate the problem
4. Generate a log URL (do not post/upload logs to the forum)

use "Settings > LibreELEC > System > Paste system logs" or run "pastekodi" over SSH, then post the URL link

wahlterh · October 22, 2024 at 10:25 AM New

Log is now created.

https://paste.libreelec.tv/certain-sloth.log

**chewitt** · October 23, 2024 at 9:15 AM New

popcornmix is there any way to force 1080p composite output using kernel DRM?

**popcornmix** · October 23, 2024 at 11:39 AM New

Quote from chewitt

popcornmix is there any way to force 1080p composite output using kernel DRM?

No, composite cannot handle HD. From here:

Quote

Composite video is an baseband analog video format that typically carries a 405, 525 or 625 line interlaced black and white or color signal, on a single channel,

I don't know if there was a way to force an older version of LE using the firmware driver to generate a 1080p gui, and rescale it down to SD, then output it. If there was it wasn't a deliberately supported use case and kernel driver has no mechanism for that.

wahlterh · October 23, 2024 at 2:00 PM New

Excuse me, but what are you talking about?

I neither use composit nor analog output....

I use HDMI all the way...

In LE v9 all is good in HD, but not in higher versions (v.10 and higher).

This is from clean install from image.

But it's maybe not my case you're discussing...

**chewitt** · October 23, 2024 at 2:08 PM New

Code

video=HDMI-A-1:1920x1080M@60

Try adding that ^ to boot params in cmdline.txt

wahlterh · October 24, 2024 at 7:48 AM New

Hi.

I added the line. No change.

HarryH · October 24, 2024 at 8:54 PM New

The EDID data of your TV looking incomplete to me. I assume that triggers the issue, because newer kernels / LE versions depending on it.

Code

2024-10-22 09:14:10.595 T:1143    debug <general>: CDRMUtils::OpenDrm - drm devices found: 2
2024-10-22 09:14:10.647 T:1143     info <general>: CDRMUtils::FindConnector - using connector: HDMI-A-1
2024-10-22 09:14:10.647 T:1143    debug <general>: CDRMUtils::OpenDrm - opened device: /dev/dri/card0
2024-10-22 09:14:10.647 T:1143    debug <general>: CDRMUtils::PrintDrmDeviceInfo - DRM Device Info:
                                                     available_nodes: 0x01
                                                     nodes:
                                                       nodes[0]: /dev/dri/card0
                                                     bustype: 0x02
                                                       platform:
                                                         fullname: /gpu
2024-10-22 09:14:10.647 T:1143    debug <general>: CDRMUtils::OpenDrm - opened render node: /dev/dri/card0
2024-10-22 09:14:10.701 T:1143     info <general>: CDRMUtils::FindConnector - using connector: HDMI-A-1
2024-10-22 09:14:10.701 T:1143     info <general>: CDRMUtils::FindEncoder - using encoder: 31
2024-10-22 09:14:10.701 T:1143    debug <general>: CDRMUtils::FindCrtc - original crtc mode: 720x576 @ 50 Hz
2024-10-22 09:14:10.701 T:1143     info <general>: CDRMUtils::FindPlanes - using crtc: 96
2024-10-22 09:14:10.701 T:1143    debug <general>: CDRMUtils::FindPlanes - using video plane 86
2024-10-22 09:14:10.701 T:1143    debug <general>: CDRMUtils::FindPlanes - using 10bit gui plane 119
2024-10-22 09:14:10.701 T:1143    debug <general>: CDRMAtomic::InitDrm - initialized atomic DRM
2024-10-22 09:14:10.702 T:1143    error <general>: [display-info] Error parsing EDID:
2024-10-22 09:14:10.702 T:1143    error <general>: [display-info] ----------------------------------------------
2024-10-22 09:14:10.702 T:1143    error <general>: [display-info] Block 1, CTA-861 Extension Block:
2024-10-22 09:14:10.702 T:1143    error <general>: [display-info]   Speaker Allocation Data Block: Deprecated bit F16 must be 0.
2024-10-22 09:14:10.702 T:1143    error <general>: [display-info] 
2024-10-22 09:14:10.702 T:1143    error <general>: [display-info] ----------------------------------------------
2024-10-22 09:14:10.702 T:1143     info <general>: [display-info] make: 'Vestel Elektronik Sanayi ve Ticaret A. S.' model: '55UHD_LCD_TV'
2024-10-22 09:14:10.796 T:1149    debug <general>: CLibInputHandler::DeviceAdded - keyboard type device added:   mini keyboard (event2)
2024-10-22 09:14:10.796 T:1149    debug <general>: CLibInputKeyboard::GetRepeat - delay: 500ms repeat: 33ms for   mini keyboard (event2)
2024-10-22 09:14:10.822 T:1149    debug <general>: CLibInputHandler::DeviceAdded - pointer type device added:   mini keyboard Mouse (event3)
2024-10-22 09:14:10.822 T:1149    debug <general>: CLibInputHandler::DeviceAdded - keyboard type device added:   mini keyboard System Control (event4)
2024-10-22 09:14:10.822 T:1149    debug <general>: CLibInputKeyboard::GetRepeat - could not get key repeat for event4 (Function not implemented)
2024-10-22 09:14:10.822 T:1149    debug <general>: CLibInputKeyboard::GetRepeat - delay: 400ms repeat: 80ms for   mini keyboard System Control (event4)
2024-10-22 09:14:10.823 T:1143    debug <general>: CWinSystemGbm::InitWindowSystem - initialized DRM
2024-10-22 09:14:10.823 T:1143     info <general>: Found resolution 720x576 with 720x576 @ 50.000000 Hz
2024-10-22 09:14:10.823 T:1143     info <general>: Found resolution 720x576 with 720x576i @ 50.000000 Hz
2024-10-22 09:14:10.823 T:1143     info <general>: Found resolution 720x480 with 720x480 @ 59.940063 Hz
2024-10-22 09:14:10.823 T:1143     info <general>: Found resolution 720x480 with 720x480 @ 60.000000 Hz
2024-10-22 09:14:10.823 T:1143     info <general>: Found resolution 720x480 with 720x480i @ 59.940063 Hz
2024-10-22 09:14:10.823 T:1143     info <general>: Found resolution 720x480 with 720x480i @ 60.000000 Hz
2024-10-22 09:14:10.823 T:1143     info <general>: Found resolution 640x480 with 640x480 @ 75.000000 Hz
2024-10-22 09:14:10.823 T:1143     info <general>: Found resolution 640x480 with 640x480 @ 73.000000 Hz
2024-10-22 09:14:10.823 T:1143     info <general>: Found resolution 640x480 with 640x480 @ 60.000000 Hz
2024-10-22 09:14:10.823 T:1143     info <general>: Skipped 1 duplicate messages..
2024-10-22 09:14:10.823 T:1143     info <general>: Found resolution 720x400 with 720x400 @ 70.000000 Hz
2024-10-22 09:14:10.830 T:1143     info <general>: EGL_VERSION = 1.4

Display More

In your first post, you mentioned an AMP between RPi4 and TV. Can you try it with RPi4 connected directly to the TV and post a new log? If that works, you should try again with getedid create before you insert the AMP again. https://wiki.libreelec.tv/configuration/edid

wahlterh · November 2, 2024 at 11:22 AM New

Hi.

When connecting directly to TV it works, so I use SSSH and "getedid create".

POR the RPi4 after connected to AMP (Yamaha RX-V565) - no picture at all.

Moving HDMI cable to TV - works.

Log created: https://paste.libreelec.tv/valued-walrus.log

**chewitt** · November 2, 2024 at 12:13 PM New

Code

hdmi_enable_4kp60=1

I'd start by removing that ^ from config.txt as the AVR only supports 1080p and that's forcing 4K modes. Any difference?

wahlterh · November 3, 2024 at 12:16 PM New

I put a # in front of hdmi_enable_4kp60=1 in config.txt

No change.

**chewitt** · November 3, 2024 at 1:53 PM New

Are there any firmware updates pending? .. Check in the settings add-on.

wahlterh · November 3, 2024 at 3:19 PM New

I updated Bootloader EEPROM and VIA USB3 fw.

(Updates are on automatic).

No change.

**Da Flex** · November 3, 2024 at 4:03 PM New

Connect RPi HDMI-0 to TV, and RPi HDMI-1 to AVR.

wahlterh · November 4, 2024 at 2:58 AM New

For test?

Because it's not a working solution due to AMP used as a HDMI-switch also...

[RPi4] Graphic (resolution) errror on new installation

Similar Threads

Resolution not more than HD