I burn Image 12.0.1 for wetekplay2, insert and ON the box, but it start in Android as usual, which is missing here ?
WetekPlay2
-
Rizwan -
September 17, 2024 at 6:33 PM -
Thread is Unresolved
-
-
I burn Image 12.0.1 for wetekplay2, insert and ON the box, but it start in Android as usual, which is missing here ?
You must force recovery mode on boot or launch recovery mode from android, that last is how I do it.
-
If I use Libreelec sd creator, it just select9.0.2 ver. which boot, why the Latest not work ?
-
Once I have started the first time forcing recovery the following starts boot direct from SD, at least on my t95z plus
-
READ: https://wiki.libreelec.tv/hardware/amlogic (then use the correct image; hint, it's not the WP2 image).
-
-
READ: https://wiki.libreelec.tv/hardware/amlogic (then use the correct image; hint, it's not the WP2 image).
-
same problem once,
PostRE: [LE 11] Wetek play 2
You can boot using the "box" image after setting the dtb name to use in uEnv.ini .. AND .. doing the toothpick/reset process to force u-boot to reload our boot scripts from the SD card. This will prevent CE from booting .. unless you repeat the toothpick/reset to force u-boot to reload their boot scripts. You cannot simply swap SD cards to swap OS.chewittJune 28, 2023 at 3:07 PM -
same problem once,
PostRE: [LE 11] Wetek play 2
You can boot using the "box" image after setting the dtb name to use in uEnv.ini .. AND .. doing the toothpick/reset process to force u-boot to reload our boot scripts from the SD card. This will prevent CE from booting .. unless you repeat the toothpick/reset to force u-boot to reload their boot scripts. You cannot simply swap SD cards to swap OS.chewittJune 28, 2023 at 3:07 PM from where I can find DTB file for Wetekplay2 , and also want to know, how WP2 go to recovery mode, never tried. After Image installation, its own Adroid image intact and can be reversed as SD removed ?