Hi, I've just bought Asus USB-N10 Nano Wifi dongle for RPi 2 thinking it will be a pretty straightorward wireless upgrade, no luck.
I've been battling this for a couple of days now, any help would be greatly appreciated.
If i go through the LibreElec GUI, there's not Wireless connection found.
I've tried poking around in the command line, i.e.
1) loading a module with "modprobe 8188eu", similarly to this thread (https://forums.raspberrypi.com/viewtopic.php?t=12330), didn't seem to do much
2) "connmanctl enable wifi" - I get "WiFi not available"
The underlying chip, identifies as 0b05:18f0 ASUSTek Computer, Inc., should be Realtek 8188EUS (according to this: https://devicehunt.com/view/type/usb/vendor/0B05/device/18F0).
Here's what the system shows in the output, which I collected based on other threads with similar issues:
Kodi2:~ # lsmod
Module Size Used by
8021q 28672 0
rfkill 24576 1
fuse 94208 3
bcm2835_gpiomem 16384 0
fixed 16384 0
wireguard 143360 0
ip6_udp_tunnel 16384 1 wireguard
udp_tunnel 16384 1 wireguard
Kodi2:~ # lsusb
Bus 001 Device 006: ID 0b05:18f0 ASUSTek Computer, Inc.
Bus 001 Device 005: ID 0781:556c SanDisk Corp. Ultra
Bus 001 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Kodi2:~ # dmesg
[ 0.000000] Booting Linux on physical CPU 0xf00
[ 0.000000] Linux version 4.19.127 (jenkins@tsuboi) (gcc version 8.3.0 (GCC)) #1 SMP Tue Jul 6 19:08:28 CEST 2021
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B Rev 1.1
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x2f800000
[ 0.000000] On node 0 totalpages: 196608
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:63
[ 0.000000] random: get_random_bytes called from start_kernel+0xb0/0x4ac with crng_init=0
[ 0.000000] percpu: Embedded 17 pages/cpu s37580 r8192 d23860 u69632
[ 0.000000] pcpu-alloc: s37580 r8192 d23860 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 194880
[ 0.000000] Kernel command line: coherent_pool=1M bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 boot=UUID=0607-0906 disk=UUID=f9394a36-2857-4600-b644-1ff5cbb69fd1 quiet root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 752520K/786432K available (9216K kernel code, 697K rwdata, 2012K rodata, 5120K init, 529K bss, 25720K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xb0800000 - 0xff800000 (1264 MB)
[ 0.000000] lowmem : 0x80000000 - 0xb0000000 ( 768 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB)
[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (5120 kB)
[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 698 kB)
[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 530 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 30004 entries in 88 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000024] Switching to timer-based delay loop, resolution 52ns
[ 0.000347] Console: colour dummy device 80x30
[ 0.000379] console [tty0] enabled
[ 0.000451] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
[ 0.000475] pid_max: default: 32768 minimum: 301
[ 0.000819] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000844] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002091] CPU: Testing write buffer coherency: ok
[ 0.002863] CPU0: update cpu_capacity 1024
[ 0.002882] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[ 0.004143] Setting up static identity map for 0x100000 - 0x10003c
[ 0.004405] rcu: Hierarchical SRCU implementation.
[ 0.007925] smp: Bringing up secondary CPUs ...
[ 0.009399] CPU1: update cpu_capacity 1024
[ 0.009413] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[ 0.011060] CPU2: update cpu_capacity 1024
[ 0.011072] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[ 0.012553] CPU3: update cpu_capacity 1024
[ 0.012565] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[ 0.012763] smp: Brought up 1 node, 4 CPUs
[ 0.012782] SMP: Total of 4 processors activated (153.00 BogoMIPS).
[ 0.012793] CPU: All CPU(s) started in HYP mode.
[ 0.012803] CPU: Virtualization extensions available.
[ 0.014128] devtmpfs: initialized
[ 0.032458] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.032852] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.032888] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.033853] pinctrl core: initialized pinctrl subsystem
[ 0.035311] NET: Registered protocol family 16
[ 0.040315] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.047377] cpuidle: using governor ladder
[ 0.047439] cpuidle: using governor menu
[ 0.048137] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.048151] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.048459] Serial: AMBA PL011 UART driver
[ 0.053598] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.063868] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-04-15 11:44, variant start_x
[ 0.067217] raspberrypi-firmware soc:firmware: Firmware hash is 82f9bb929ce2186eb1824178c1ae82902ad6275c
[ 0.120374] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[ 0.123096] SCSI subsystem initialized
[ 0.123460] usbcore: registered new interface driver usbfs
[ 0.123547] usbcore: registered new interface driver hub
[ 0.123720] usbcore: registered new device driver usb
[ 0.126078] clocksource: Switched to clocksource arch_sys_counter
[ 0.245975] FS-Cache: Loaded
[ 0.262186] NET: Registered protocol family 2
[ 0.263429] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.263479] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.263600] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.263793] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.264007] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.264078] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.264458] NET: Registered protocol family 1
[ 0.265451] RPC: Registered named UNIX socket transport module.
[ 0.265465] RPC: Registered udp transport module.
[ 0.265476] RPC: Registered tcp transport module.
[ 0.265487] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.295015] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 0.298157] Initialise system trusted keyrings
[ 0.298476] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.312023] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.313228] FS-Cache: Netfs 'nfs' registered for caching
[ 0.314135] NFS: Registering the id_resolver key type
[ 0.314182] Key type id_resolver registered
[ 0.314193] Key type id_legacy registered
[ 0.314219] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.314925] FS-Cache: Netfs 'cifs' registered for caching
[ 0.325622] Key type asymmetric registered
[ 0.325641] Asymmetric key parser 'x509' registered
[ 0.325744] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.325762] io scheduler noop registered (default)
[ 0.325775] io scheduler deadline registered
[ 0.326090] io scheduler cfq registered
[ 0.326106] io scheduler mq-deadline registered
[ 0.326119] io scheduler kyber registered
[ 0.326352] io scheduler bfq registered
[ 0.330329] bcm2708_fb soc:fb: FB found 1 display(s)
[ 0.341359] Console: switching to colour frame buffer device 82x26
[ 0.346963] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656x416
[ 0.350129] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.350629] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.351487] vc-sm: Videocore shared memory driver
[ 0.370287] brd: module loaded
[ 0.370521] loop: module loaded
[ 0.401962] usbcore: registered new interface driver rtsx_usb
[ 0.403039] Loading iSCSI transport class v2.0-870.
[ 0.403763] iscsi: registered transport (tcp)
[ 0.404424] libphy: Fixed MDIO Bus: probed
[ 0.404486] tun: Universal TUN/TAP device driver, 1.6
[ 0.404906] usbcore: registered new interface driver lan78xx
[ 0.404995] usbcore: registered new interface driver dm9601
[ 0.405083] usbcore: registered new interface driver smsc95xx
[ 0.405144] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.433186] dwc_otg 3f980000.usb: base=(ptrval)
[ 0.633623] Core Release: 2.80a
[ 0.633641] Setting default values for core params
[ 0.633681] Finished setting default values for core params
[ 0.834163] Using Buffer DMA mode
[ 0.834178] Periodic Transfer Interrupt Enhancement - disabled
[ 0.834189] Multiprocessor Interrupt Enhancement - disabled
[ 0.834204] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.834235] Dedicated Tx FIFOs mode
[ 0.835020] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = af914000 dma = 0xef914000 len=9024
[ 0.835058] FIQ FSM acceleration enabled for :
[ 0.835058] Non-periodic Split Transactions
[ 0.835058] Periodic Split Transactions
[ 0.835058] High-Speed Isochronous Endpoints
[ 0.835058] Interrupt/Control Split Transaction hack enabled
[ 0.835074] dwc_otg: Microframe scheduler enabled
[ 0.835168] WARN::hcd_init_fiq:457: FIQ on core 1
[ 0.835181] WARN::hcd_init_fiq:458: FIQ ASM at 80730bb4 length 36
[ 0.835194] WARN::hcd_init_fiq:497: MPHI regs_base at b0810000
[ 0.835222] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.835275] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.835340] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
[ 0.835395] Init: Port Power? op_state=1
[ 0.835407] Init: Power Port (0)
[ 0.835887] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.835907] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.835924] usb usb1: Product: DWC OTG Controller
[ 0.835940] usb usb1: Manufacturer: Linux 4.19.127 dwc_otg_hcd
[ 0.835956] usb usb1: SerialNumber: 3f980000.usb
[ 0.836946] hub 1-0:1.0: USB hub found
[ 0.837034] hub 1-0:1.0: 1 port detected
[ 0.838004] dwc_otg: FIQ enabled
[ 0.838017] dwc_otg: NAK holdoff enabled
[ 0.838027] dwc_otg: FIQ split-transaction FSM enabled
[ 0.838045] Module dwc_common_port init
[ 0.838515] usbcore: registered new interface driver usb-storage
[ 0.838842] mousedev: PS/2 mouse device common for all mice
[ 0.839520] i2c /dev entries driver
[ 0.841803] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 0.842128] bcm2835-cpufreq: min=600000 max=900000
[ 0.843030] sdhci: Secure Digital Host Controller Interface driver
[ 0.843042] sdhci: Copyright(c) Pierre Ossman
[ 0.843825] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 0.844118] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.845270] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.845442] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.848351] usbcore: registered new interface driver usbhid
[ 0.848360] usbhid: USB HID core driver
[ 0.849205] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[ 0.851004] [vc_sm_connected_init]: start
[ 0.859792] [vc_sm_connected_init]: end - returning 0
[ 0.863014] NET: Registered protocol family 10
[ 0.864662] Segment Routing with IPv6
[ 0.864780] NET: Registered protocol family 17
[ 0.864945] Key type dns_resolver registered
[ 0.865352] Registering SWP/SWPB emulation handler
[ 0.866581] Loading compiled-in X.509 certificates
[ 0.877379] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 0.877504] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 0.881410] sdhost: log_buf @ (ptrval) (ef913000)
[ 0.929123] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 0.931372] console [netcon0] enabled
[ 0.931384] netconsole: network logging started
[ 0.931396] of_cfs_init
[ 0.931430] of_cfs_init: OK
[ 0.946050] Freeing unused kernel memory: 5120K
[ 0.959228] Run /init as init process
[ 0.998194] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.000685] mmc0: new high speed SDHC card at address 0001
[ 1.002276] mmcblk0: mmc0:0001 00000 7.41 GiB
[ 1.005948] mmcblk0: p1 p2
[ 1.063019] Indeed it is in host mode hprt0 = 00021501
[ 1.074009] Checking disk(s): UUID=0607-0906 UUID=f9394a36-2857-4600-b644-1ff5cbb69fd1
[ 1.147551] random: fast init done
[ 1.246158] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.246344] Indeed it is in host mode hprt0 = 00001101
[ 1.446457] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[ 1.446476] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.447247] hub 1-1:1.0: USB hub found
[ 1.447358] hub 1-1:1.0: 5 ports detected
[ 1.726168] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.816479] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[ 1.816499] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.819356] smsc95xx v1.0.6
[ 1.873889] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:84:60:74
[ 1.946136] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[ 1.986593] fsck: CP437: Invalid argument
[ 1.986848] fsck: fsck.fat 4.1 (2017-01-24)
[ 1.987164] fsck: /dev/mmcblk0p1: 223 files, 17998/65501 clusters
[ 1.987514] fsck: STORAGE: clean, 1101/1812480 files, 245302/7243776 blocks
[ 2.069874] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.00
[ 2.069894] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.069905] usb 1-1.2: Product: USB Receiver
[ 2.069916] usb 1-1.2: Manufacturer: Logitech
[ 2.099919] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-3f980000.usb-1.2/input2
[ 2.233368] input: Logitech M185 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/0003:046D:4008.0004/input/input0
[ 2.234306] logitech-hidpp-device 0003:046D:4008.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M185] on usb-3f980000.usb-1.2:1
[ 2.252111] input: Logitech K270 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/0003:046D:4003.0005/input/input1
[ 2.253768] logitech-hidpp-device 0003:046D:4003.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K270] on usb-3f980000.usb-1.2:2
[ 2.286217] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
[ 2.376988] usb 1-1.3: New USB device found, idVendor=0781, idProduct=556c, bcdDevice= 1.26
[ 2.377007] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.377018] usb 1-1.3: Product: Ultra
[ 2.377029] usb 1-1.3: Manufacturer: SanDisk
[ 2.377039] usb 1-1.3: SerialNumber: 200524443118E18141E4
[ 2.378098] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 2.378750] scsi host0: usb-storage 1-1.3:1.0
[ 2.452791] usb 1-1.4: new high-speed USB device number 6 using dwc_otg
[ 2.543436] usb 1-1.4: New USB device found, idVendor=0b05, idProduct=18f0, bcdDevice= 0.00
[ 2.543455] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.543466] usb 1-1.4: Product: 802.11n NIC
[ 2.543477] usb 1-1.4: Manufacturer: Realtek
[ 2.543487] usb 1-1.4: SerialNumber: C87F548F848B
[ 2.623260] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.387646] scsi 0:0:0:0: Direct-Access SanDisk Ultra 1.26 PQ: 0 ANSI: 5
[ 3.391139] sd 0:0:0:0: [sda] 62530624 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 3.392358] sd 0:0:0:0: [sda] Write Protect is off
[ 3.392376] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 3.392909] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.403330] sda: sda1
[ 3.406198] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 3.723780] systemd[1]: System time before build time, advancing clock.
[ 3.739958] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[ 3.740832] systemd[1]: Detected architecture arm.
[ 3.748100] systemd[1]: Set hostname to <LibreELEC>.
[ 3.752190] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[ 4.085105] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.114995] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 4.115524] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.115886] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.116130] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.116462] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.117847] systemd[1]: Listening on udev Control Socket.
[ 4.118987] systemd[1]: Listening on Journal Socket.
[ 4.124570] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.545702] kernel-overlays-setup: setup base modules
[ 4.670842] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.19.127
[ 4.741103] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
[ 4.741461] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
[ 4.743841] kernel-overlays-setup: done
[ 5.086211] systemd-journald[201]: Received request to flush runtime journal from PID 1
[ 5.164826] wireguard: WireGuard 1.0.20200908 loaded. See www.wireguard.com for information.
[ 5.164842] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
[ 6.599711] random: crng init done
[ 6.599732] random: 7 urandom warning(s) missed due to ratelimiting
[ 8.087189] Console: switching to colour dummy device 80x30
[ 8.666936] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 10.052452] fuse init (API version 7.27)
[ 10.439109] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 10.579462] 8021q: 802.1Q VLAN Support v1.8
[ 12.084444] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
Kodi2:~ # uname -r
4.19.127
Kodi2:~ #
Display More