[8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro

  • Pre defined mux should choose " auto-default"

    I did this for DVB-T and it works perfectly fine. Scan results show all available channels. However for DVB-T2 there are no predefined mixed? At least I don't get anny results...

  • I did this for DVB-T and it works perfectly fine. Scan results show all available channels. However for DVB-T2 there are no predefined mixed? At least I don't get anny results...

    Predefined db is outdated. You have to put new muxes manually.

  • Same error after updating to 8.0.1a-I-fix .tar version, Just tried to tune on channels already scanned.

    2017-03-30 21:58:45.111 [ NOTICE]:subscription: 0004: No input source available for subscription "127.0.0.1 [ | Kodi Media Center ]" to channel "TV Senado"
    2017-03-30 21:58:47.111 [ NOTICE]:subscription: 0004: No input source available for subscription "127.0.0.1 [ | Kodi Media Center ]" to channel "TV Senado"
    2017-03-30 21:58:49.110 [ INFO]:mpegts: 357MHz in NET - scan no data, failed
    2017-03-30 21:58:49.110 [ INFO]:subscription: 007A: "scan" unsubscribing
    2017-03-30 21:58:49.111 [ INFO]:mpegts: 291MHz in NET - tuning on Availink avl6862 : DVB-C #0
    2017-03-30 21:58:49.111 [ INFO]:subscription: 007D: "scan" subscribing to mux "291MHz", weight: 6, adapter: "Availink avl6862 : DVB-C #0", network: "NET", service: "Raw PID Subscription"
    2017-03-30 21:58:49.111 [ NOTICE]:subscription: 0004: No input source available for subscription "127.0.0.1 [ | Kodi Media Center ]" to channel "TV Senado"
    2017-03-30 21:58:50.111 [ NOTICE]:subscription: 0004: No input source available for subscription "127.0.0.1 [ | Kodi Media Center ]" to channel "TV Senado"
    2017-03-30 21:58:52.111 [ NOTICE]:subscription: 0004: No input source available for subscription "127.0.0.1 [ | Kodi Media Center ]" to channel "TV Senado"
    2017-03-30 21:58:54.111 [ INFO]:mpegts: 291MHz in NET - scan no data, failed
    2017-03-30 21:58:54.111 [ INFO]:subscription: 007D: "scan" unsubscribing
    2017-03-30 21:58:54.111 [ INFO]:mpegts: 471MHz in NET - tuning on Availink avl6862 : DVB-C #0
    2017-03-30 21:58:54.111 [ INFO]:subscription: 0080: "scan" subscribing to mux "471MHz", weight: 6, adapter: "Availink avl6862 : DVB-C #0", network: "NET", service: "Raw PID Subscription"
    2017-03-30 21:58:54.111 [ NOTICE]:subscription: 0004: No input source available for subscription "127.0.0.1 [ | Kodi Media Center ]" to channel "TV Senado"
    2017-03-30 21:58:55.111 [ NOTICE]:subscription: 0004: No input source available for subscription "127.0.0.1 [ | Kodi Media Center ]" to channel "TV Senado"


  • Have you upgraded tvheadend42 service? It looks like you want to watch channel TV Senado and scan network at once. Minimally try to stop watching tv channels and then try to start scanning.

  • Hey afl1,

    is CEC (switching on/ off TV) working for you without issues?
    If yes, with which combination? (K1plus/ TV?)
    Which android firmware did you install before using libreelec? (regarding u-boot)


  • Have you upgraded tvheadend42 service? It looks like you want to watch channel TV Senado and scan network at once. Minimally try to stop watching tv channels and then try to start scanning.

    Code
    2017-04-01 15:06:24.889 mpegts: 219MHz in DVB-C Network - tuning on Availink avl6862 : DVB-C #02017-04-01 15:06:26.072 epggrab: 219MHz in DVB-C Network - registering mux for OTA EPG2017-04-01 15:06:27.577 subscription: 0001: "scan" subscribing to mux "219MHz", weight: 5, adapter: "Availink avl6862 : DVB-C #0", network: "DVB-C Network", service: "Raw PID Subscription"2017-04-01 15:06:32.499 mpegts: 219MHz in DVB-C Network - scan no data, failed2017-04-01 15:06:32.499 subscription: 0001: "scan" unsubscribing

    From fresh install image (img.gz), still getting same result: "scan no data, failed". How can i get more detailed log?

    Edited once, last by tiagovb (April 1, 2017 at 4:07 PM).

  • I'm new here, hi everyone and congratulations to kszaq and afl1 for his incredible work.

    Last release is great! big step forward but i still having a problem.

    Everything seems work, but i cant get oscam plugin work correctly. This is the oscam's repetitive live log ....

    Quote


    2017/04/03 19:09:11 4C3D68E9 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID --------------------------
    2017/04/03 19:09:14 4C3D68E9 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID --------------------------
    2017/04/03 19:09:17 4C3D68E9 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 2 enabled and 0 disabled ecmpids!
    2017/04/03 19:09:17 4C3D68E9 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!

    The same config with other version of oscam works like a charm :huh: (LE7.0 aarch64 oscam version)

    Somebody can help me? Get you the smae or similar issue?

    Greetings!


  • It's buffering too much. I don't know why. In the last build it was not so. Does anyone have the same problem?

    yes, it's buffering too much...
    first 30-45 minutes it's ok but after buffering every 20 seconds with aftefacts on screen or slow motion like 10fps...
    I dont know how was on previous version... i've start from 8.0