[8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro

    Quote from AtHoS

    Yes, I enabled the DVB-T tuner in Tvheadened frontend DVB Inputs -> TV Adapters (pick the Enabled checkbox and set the network to my predefined), because with the new configuration is automatically "deactivated" while the HTSP Client say: No free tuner available.
    After enabled DVB-T in Tvheadend frontend (and set Network and 'Maximum PIDs' to 26) changed HTSP Client message from "No free tuner avaliable" to "No signal"

    Unfortunately I could not find a solution


    Thank for report. I did only blind dvb-t test as I have no athenna at home. Tomorrow morning I'll be tested it at my work.

    DVB-T scan fails using recommended setup on KII Pro.
    DVB-S scan works but seems to falsely report some transponder scans as having failed even though the channels appear in the services window.

    8.0.0e-I is buggy, there is no tuning for dvb-t/dvb-c. I finally decided to remove it from #1.
    The approach with 3 frontend is invalid as there is only single tuner. We'll try to fix dvb-s/dvb-t/dvb-c sharing with single frontend.

    Tvheadend42 with fixed standard sharing - first stage, it works only with disabled OTA EPG.
    service.tvheadend42-8.1.112.zip

    Pls, test it in 8.0.0d-I with dual standard config by switching channel with different standards (dvb-s/dvb-t/dvb-c).
    For test is necessary disable OTA EPG in adapter settings.
    I did only blind test by driver debugging as I have only dvb-t source at my work.
    I am waiting for reports verifying this fix to be able confirm fix to tvheadend team.

    P.S.
    I am downloading EPG from internet via Webgrabplus.

    Edited once, last by afl1 (March 13, 2017 at 2:25 PM).

    Not working here

    2017-03-13 14:27:38.364 htsp: Got connection from 127.0.0.1
    2017-03-13 14:27:38.364 htsp: 127.0.0.1: Welcomed client software: Kodi Media Center (HTSPv25)
    2017-03-13 14:27:38.365 htsp: 127.0.0.1 [ Kodi Media Center ]: Identified as user ''
    2017-03-13 14:28:18.656 mpegts: 507MHz in dvbc - tuning on Availink avl6862 : DVB-C #0
    2017-03-13 14:28:19.762 epggrab: 507MHz in dvbc - registering mux for OTA EPG
    2017-03-13 14:28:19.777 subscription: 0001: "scan" subscribing to mux "507MHz", weight: 6, adapter: "Availink avl6862 : DVB-C #0", network: "dvbc", service: "Raw PID Subscription"
    2017-03-13 14:28:24.746 mpegts: 507MHz in dvbc - scan no data, failed
    2017-03-13 14:28:24.747 subscription: 0001: "scan" unsubscribing

    Quote from gor

    registering mux for OTA EPG >>" For test is necessary disable OTA EPG in adapter settings "


    Sorry, config didnt get applied

    2017-03-13 15:01:45.041 mpegts: 507MHz in my dvbc - tuning on Availink avl6862 : DVB-C #0
    2017-03-13 15:01:45.042 subscription: 0004: "scan" subscribing to mux "507MHz", weight: 6, adapter: "Availink avl6862 : DVB-C #0", network: "my dvbc", service: "Raw PID Subscription"
    2017-03-13 15:01:50.042 mpegts: 507MHz in my dvbc - scan no data, failed
    2017-03-13 15:01:50.042 subscription: 0004: "scan" unsubscribing

    Quote from pepesuriano


    Sorry, config didnt get applied

    2017-03-13 15:01:45.041 mpegts: 507MHz in my dvbc - tuning on Availink avl6862 : DVB-C #0
    2017-03-13 15:01:45.042 subscription: 0004: "scan" subscribing to mux "507MHz", weight: 6, adapter: "Availink avl6862 : DVB-C #0", network: "my dvbc", service: "Raw PID Subscription"
    2017-03-13 15:01:50.042 mpegts: 507MHz in my dvbc - scan no data, failed
    2017-03-13 15:01:50.042 subscription: 0004: "scan" unsubscribing

    I asked for testing on runnig channels !!!!!!!!

    This version is not a fix for dvb-c annex B!

    Edited once, last by afl1 (March 13, 2017 at 4:00 PM).

    Quote from afl1


    Updated version with OTA EPG fix:
    service.tvheadend42-8.1.112a.zip

    Pls, test tuner sharing among standards.

    For me internal dvb-t not work.
    I disable attached usb dvb-t tuner, the antenna cable put to dvb-t.
    Enable internal dvb-t tuner, and set up network to dvb-t
    When i choose dvb-t channel, says no signal :(
    And when dvb-s epggrap make, the no free adapter :(

    When you want, tomorrow morning i make log.

    Edited once, last by envagyok (March 13, 2017 at 7:11 PM).

    Quote from afl1

    Pls report versions, tested dvb-standards, tvheadend log...

    For tvheadend trace log: linuxdvb, mpegts

    I feel like in Kinder Garden.

    Hi,

    Thanks for great work.

    clean install tvheadend 8.1.112a dvb-t dvb-s2
    Dvb-s scan was ok, but dvb-t wad fail, with force and manually edited mux I was able to only one mux with 8 channels scanned and mapped.
    Firstly works without epg I can switch dvs2 and dvbt channels, after reboot epg works but I got usually no signal , but sometime started dvb-t channels , but dvb-s not anymore.
    debug.log with linuxdvb, mpegts

    people is one tuner, im suppose DVB-S2 tuner scan EPG and then when you want watch DVB-T tuner is busy becuase scan EPG from DVB-S2
    (special if you just started tvheadend/box becuase default tvheadend check changes on MUXs/TPs on start and scan EPG )
    if you want check if DVB-T works, just disable for sec. DVB-S2 and then try

    @alf1 big respect for fix drivers !!! and method choose from ljalves which wrote own from 0 :) becuase this one from amlogic is some bugy s*it
    i belive now are even better from Wetek :)

    Edited once, last by piotrasd (March 13, 2017 at 11:19 PM).