[8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro

    Quote from quitroot


    afl1 as usual, thanks for the update.
    this sentence still relevant?
    - Latest addon service Tvheadend42 is broken. Install fixed version service.tvheadend42-8.1.109.zip and disable auto-update.


    Yes.

    P.S.
    My release is based on kszaq's 7.95.beta5 only adding internal driver as a loadable module. You can run my kerrnel.img with kszaq's SYSTEM and v/v with only one constraining, loosing support for internal dvb driver.

    Edited once, last by afl1 (February 5, 2017 at 9:14 PM).

    loosing support for internal dvb driver. It's all difference...

    I should mention biggg thanks for kszaq as well for keeping updating the system, sorry. And thanks you afl1, for implementing the internal drivers.

    Sent from my Redmi Note 3 using Tapatalk

    Edited once, last by quitroot (February 5, 2017 at 9:03 PM).

    Quote from quitroot


    afl1 as usual, thanks for the update.
    this sentence still relevant?
    - Latest addon service Tvheadend42 is broken. Install fixed version service.tvheadend42-8.1.109.zip and disable auto-update.

    Tvheadend HTSP Client 3.4.16.1 (installed from LE repository) do not work with fixed version service.tvheadend42-8.1.109.zip -> error message: Acces denied
    and do not work with downloadable version from LE repository (same error message)

    It was also the same as the previous fixed version tvheadend42 (.108)

    However service.tvheadend42-8.1.107.zip and pvr.hts-3.4.12.zip work very well

    Edited once, last by AtHoS (February 6, 2017 at 1:51 AM).

    Do I have to do anything more to make this work DVB-C on Kii besides including dtb.img for kii??? I had just tested it on dvb-c network with tvheadend working version indicated on the post from that zip file.

    Edited once, last by tiagovb (February 6, 2017 at 3:21 AM).

    Quote from AtHoS

    Tvheadend HTSP Client 3.4.16.1 (installed from LE repository) do not work with fixed version service.tvheadend42-8.1.109.zip -> error message: Acces denied
    and do not work with downloadable version from LE repository (same error message)

    It was also the same as the previous fixed version tvheadend42 (.108)

    However service.tvheadend42-8.1.107.zip and pvr.hts-3.4.12.zip work very well


    New version pvr.hts-4.0.6.zip in first post.
    [hr]

    Quote from tiagovb


    Do I have to do anything more to make this work DVB-C on Kii besides including dtb.img for kii??? I had just tested it on dvb-c network with tvheadend working version indicated on the post from that zip file.


    For testing you need only latest LibreELEC version (7.95.beta5). In tvheadend you have to create dvb-c mux best matching to your dvb-c provider and attach it to to dvb-c adapter. For testing disable all other avl6862 adapters or link them to dvb-c adapter. I only made blind copy of DVB-C support from TBS5520 (avl6882+r848) without any testing. Pls report testing results and attach log from tvheadend. Also run from ssh console w_scan. Copy attached version to /storage and submit following commands:

    Code
    chmod 0755 /storage/w_scan
systemctl stop service.tvheadend42.service
/storage/w_scan -!v -fc


    In w_scan you can specify country -cAT for Austria, default is DE.
    You will get something like this:

    Edited once, last by afl1 (February 6, 2017 at 9:31 AM).

    I install LibreELEC-Amlogic.aarch64-KI_Plus-7.0.2.004.4, this old version.
    The dvb-s with oscam work with this version. Sadly usb dvb-t isnt support with this version. But when i restore tvheadend settings from wetek, i can use dvb-t too with oscam.

    I dont know why, but oscam+tvh work only with this old version together, but i cannot know the reason.


    So something broke with bump to libreelec 8.

    VDR is working again with your new version (2017-02-05), thanks a lot!

    dvb-c is not working with VDR, i get the following messages:

    Code
    Feb 06 12:28:28 k1plus vdr[3748]: [3788] frontend 0/0 timed out while tuning to channel 47 (Disney SD), tp 450
Feb 06 12:28:28 k1plus kernel: i2c i2c-1: avl6862_set_frontend: set DVBC ok! ret = 0
Feb 06 12:28:38 k1plus kernel: i2c i2c-1: avl6862_set_frontend: set DVBC ok! ret = 0
Feb 06 12:28:40 k1plus kernel: i2c i2c-1: avl6862_set_frontend: set DVBC ok! ret = 0
Feb 06 12:28:49 k1plus vdr[3748]: [3788] frontend 0/0 timed out while tuning to channel 202 (CNBC), tp 458
Feb 06 12:28:49 k1plus kernel: i2c i2c-1: avl6862_set_frontend: set DVBC ok! ret = 0
Feb 06 12:28:59 k1plus kernel: i2c i2c-1: avl6862_set_frontend: set DVBC ok! ret = 0
Feb 06 12:29:01 k1plus kernel: i2c i2c-1: avl6862_set_frontend: set DVBC ok! ret = 0


    How can i debug this further?

    if i understood you correctly, this is now the current version of the linux media_build driver? So the driver is open source now?

    Quote from fkyle


    VDR is working again with your new version (2017-02-05), thanks a lot!

    dvb-c is not working with VDR, i get the following messages:

    Code
    Feb 06 12:28:28 k1plus vdr[3748]: [3788] frontend 0/0 timed out while tuning to channel 47 (Disney SD), tp 450
Feb 06 12:28:28 k1plus kernel: i2c i2c-1: avl6862_set_frontend: set DVBC ok! ret = 0
Feb 06 12:28:38 k1plus kernel: i2c i2c-1: avl6862_set_frontend: set DVBC ok! ret = 0
Feb 06 12:28:40 k1plus kernel: i2c i2c-1: avl6862_set_frontend: set DVBC ok! ret = 0
Feb 06 12:28:49 k1plus vdr[3748]: [3788] frontend 0/0 timed out while tuning to channel 202 (CNBC), tp 458
Feb 06 12:28:49 k1plus kernel: i2c i2c-1: avl6862_set_frontend: set DVBC ok! ret = 0
Feb 06 12:28:59 k1plus kernel: i2c i2c-1: avl6862_set_frontend: set DVBC ok! ret = 0
Feb 06 12:29:01 k1plus kernel: i2c i2c-1: avl6862_set_frontend: set DVBC ok! ret = 0


    How can i debug this further?

    if i understood you correctly, this is now the current version of the linux media_build driver? So the driver is open source now?

    To debug driver from ssh use following commands:

    Code
    echo 1 > /sys/module/avl6862/parameters/debug_avl
while true; do dmesg -c ; sleep 1; done

    Edited once, last by afl1 (February 6, 2017 at 1:59 PM).

    Quote from afl1

    To debug driver from ssh use following commands:

    Code
    echo 1 > /sys/module/avl6862/parameters/debug_avl
while true; do dmesg -c ; sleep 1; done

    this is what i get when tuning to a dvb-c channel. It is the same with VDR and w_scan.

    Edited once, last by fkyle (February 6, 2017 at 3:29 PM).

    Quote from fkyle

    this is what i get when tuning to a dvb-c channel. It is the same with VDR and w_scan.

    THX. I see there is a issue with tuning DVB-C channels.
    [hr]

    Update version 7.95.beta5b in #1.

    There is playback fix by removed waiting for a key frame in Amlogic decoder. Probably will fix channel switching issue.
    In my short testing channel switching looks reliable now. - issue still persist.

    Edited once, last by afl1 (February 6, 2017 at 5:06 PM).

    Quote from afl1


    New version pvr.hts-4.0.6.zip in first post.

    Thank you afl1, but the problem remains....however, the fault did not rest...

    In the TVHeadened User Configuration section, the streaming and video recorder field it was empty.
    After I edited and both of them set it all right's, the pvr.hts-4.0.6 go work :D

    See if someone else can come in handy this information.

    Quote from afl1

    You are probably blind!
    Go to first post in this thread.

    But me neither. Only see beta5 on the first post. No beta5b yet. :(

    Edited: Now I can see beta5b. Thanks.


    BTW. Thanks for your new build with media_build support. Now I can use MyGica T230(c) with Kii Pro. I now have 3 dvb-t2 tuner working together (one internal plus 2 external). :D

    Edited once, last by pawnthep (February 7, 2017 at 12:15 AM).

    Quote from fkyle

    this is what i get when tuning to a dvb-c channel. It is the same with VDR and w_scan.

    I prepared special build with new driver. I tested dvb-t and dvb-c successfully. Dvb-s still not working, work in progress to fix dvb-s.

    LibreELEC-S905.arm-8.0-devel-7.95.beta5X-20170207093751.img.gz


    Pls, test it and let me know.
    [hr]

    Quote from envagyok

    I install LibreELEC-Amlogic.aarch64-KI_Plus-7.0.2.004.4, this old version.
    The dvb-s with oscam work with this version. Sadly usb dvb-t isnt support with this version. But when i restore tvheadend settings from wetek, i can use dvb-t too with oscam.

    I dont know why, but oscam+tvh work only with this old version together, but i cannot know the reason.


    So something broke with bump to libreelec 8.

    Pls make me favour and do clean installation:
    LibreELEC-S905.arm-8.0-devel-7.95.beta5b-20170206161635.img.gz
    service.tvheadend42-8.1.109.zip
    pvr.hts.4.0.6.zip
    service.softcam.oscam-8.1.103.zip
    service.system.pcscd-addon-8.1.0.zip

    and test for me pcscd-addon if card-reader is working.

    Edited once, last by afl1 (February 9, 2017 at 9:36 AM).

    HI. I can not run a satellite TV. VDR scans transponders but it is not the channels. Can someone litter kodi backup or libreelec backup. Oscam everything is working properly installed according to instructions, but dvb-s2 does not work. Thank you for any help.

    Edited once, last by charlie13 (February 7, 2017 at 2:53 PM).