You can try with Beelink GS1 image if it is better fit. If not, you'll have to provide proper dtb file or modify existing one on the fly with dt overlays. However, it's not easy to figure out what to enable and how things are linked together, especially if you've never done that.
You can try with Beelink GS1 image if it is better fit. If not, you'll have to provide proper dtb file or modify existing one on the fly with dt overlays. However, it's not easy to figure out what to enable and how things are linked together, especially if you've never done that.
Thanks for your advice, i thought issue with usb bus chip (different IC) or somethings like that because not opening usb. i have linux experiance about debian and ubuntu so android systems comes with special drivers in every different rom and not usable like standart pc.
also i try armbian and same problem there. Certainly problem with usb controller but how i will find right fix im not sure.
Certainly problem with usb controller
No, problem is wrong DT file (board description). Each board is wired differently, like USB ports and their power supplies. But modifying or writing DT file for board without schematic is very hard. Certainly out of scope of this forum.
No, problem is wrong DT file (board description). Each board is wired differently, like USB ports and their power supplies. But modifying or writing DT file for board without schematic is very hard. Certainly out of scope of this forum.
If so can we take some codes from files on running android system for use in our modifiy DT file?
Not directly and there is not enough information for each detail, so some guess work is needed.
Hi again, i fixed problem. now my USB Keybord working
But need a usb duplicator with usb externel power adaptor. If feeding usb devices with external adaptor everything is working. lol
i just try and fixed 
if anyone have same problem this topic can be helpful.
