RPi 4B - USB issues with latest kernel

    The same with LE 11 nightly-20230113-4c5c570

    [103973.761646] rpivid feb10000.codec: PPS changed

    [103973.762687] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [103975.892736] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [103978.026128] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [103980.159510] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [103980.159536] usb 1-1.2.3: dvb_usb_v2: streaming_ctrl() failed=-110

    [103980.164800] rpivid feb10000.codec: rpivid_h265_stop

    [103982.292944] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [103984.426400] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [103986.559761] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [103988.693159] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [103990.826595] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [103992.959981] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [103995.093501] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [103997.226777] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [103999.361068] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [104001.493659] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    MyGica DVB-T2 USB adapter is now unusable with LE 11 :(

    I have also suffered for a number of years on different Intel-based x86_64 machines, whereby intermittent -110 (timeout) messages are encountered for adapters running in the dvbsky.c module (for me, the MyGica T230 DVB-T2 adapters and DVBSky S960 DVB-S2 adapters). Sometimes the machine can go for several weeks (or months) and be OK, then it will randomly encounter the error and require a reboot to fix it.

    Personally, I worked around the issue by buying a usb hub and programmatically cycling the usb port power using uhubctl when the error is encountered (thus not requiring a full reboot), but this is obviously far from ideal.

    I have recently made some headway in debugging the underlying cause in the driver. From what I've found it seems to occur more frequently when the TVheadend status period is set lower. e.g. with the status read period set to 8000ms (maximum) the issue occurs far less frequently for me.

    I think it might be caused by a race condition when a thread attempts to update the last_lock status of the device, whilst another reads the state buffers (which are defined in the same struct as last_lock) to send i2c messages. I have attached a patch that I am trialling on my own machine, but since it can take several weeks for this to surface on my hardware I thought I would share this patch incase anyone else is able/willing to test on hardware where the error is more frequent. Note: this is only intended to fix those random -110 timeout problems with adapters running inside the dvbsky module (e.g. MyGica) - no ideas what the (similar) issue is with the Astrometa adapter as reported earlier in this thread - I don't own one of those adapters.

    Edited 3 times, last by jahutchi (January 31, 2023 at 5:47 PM).

    Well, in past I also tried to play with the status read period but without any effect.

    I believe the patch could help but the request should perhaps go to Linux developers instead.

    Quote from ghtester

    I believe the patch could help but the request should perhaps go to Linux developers instead.

    That is certainly my intention, though I'm firstly trying to prove one way or the other whether the patch has a positive effect.

    My problem is that it takes several weeks for the issue to surface on my setup. I therefore posted the patch here, hoping for some feedback from someone who is encountering the issue more readily.

    Failing that, I'll probably leave it running with the patch for a few weeks/months on my own setup; to try and seek proof either way as to whether the patch has a positive effect.

    Yeah I am experiencing the issue quite often but for me it's not easy to apply the patch to LE. I suppose this would need a LE compilation from scratch and it seems to be a bit complex for me to do it.

    I am running LE 11 Nightly builds, updating every couple days. Hoping that issues I have will be fixed by LE developers some day. Unfortunately it looks that Live TV (DVB-T and related) has a rather low priority - I understand there are more important things to do and the time is limited as this is non-commercial project and developers are working on it at their free time.

    Even worse behaviour with latest LE 11 nightly-20230209-07249c1:

    3107.877784] rpivid feb10000.codec: PPS changed

    [ 3107.911497] rpivid feb10000.codec: PPS changed

    [ 3107.960575] rpivid feb10000.codec: PPS changed

    [ 3108.069702] rpivid feb10000.codec: rpivid_h265_stop

    [ 3109.160469] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-71

    [ 3109.175288] usb 1-1.3: reset high-speed USB device number 4 using xhci_hcd

    [ 3109.251825] usb 1-1.3: device descriptor read/64, error -71

    [ 3109.312652] usb 1-1.2: USB disconnect, device number 3

    [ 3109.312673] usb 1-1.2.3: USB disconnect, device number 6

    [ 3109.431854] usb 1-1.3: device descriptor read/64, error -71

    [ 3109.568395] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3109.611913] usb 1-1.3: reset high-speed USB device number 4 using xhci_hcd

    [ 3109.688619] usb 1-1.3: device descriptor read/64, error -71

    [ 3109.771821] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3109.771851] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3109.868648] usb 1-1.3: device descriptor read/64, error -71

    [ 3110.048723] usb 1-1.3: reset high-speed USB device number 4 using xhci_hcd

    [ 3110.048895] usb 1-1.3: Device not responding to setup address.

    [ 3110.255426] usb 1-1.3: Device not responding to setup address.

    [ 3110.462000] usb 1-1.3: device not accepting address 4, error -71

    [ 3110.535353] usb 1-1.3: reset high-speed USB device number 4 using xhci_hcd

    [ 3110.535552] usb 1-1.3: Device not responding to setup address.

    [ 3110.568795] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3110.742249] usb 1-1.3: Device not responding to setup address.

    [ 3110.948823] usb 1-1.3: device not accepting address 4, error -71

    [ 3110.967458] rpivid feb10000.codec: rpivid_h265_start: (1024x544)

    [ 3110.971998] rpivid feb10000.codec: SPS changed

    [ 3110.972015] rpivid feb10000.codec: PPS changed

    [ 3110.972038] rpivid feb10000.codec: Missing DPB ent 0, timestamp=0

    [ 3111.055547] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3111.055577] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3111.055585] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3111.959200] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3112.866194] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3112.979070] usb 1-1.4: stat urb: status -71

    [ 3112.979123] usb 1-1.4: cmd cmplt err -71

    [ 3112.979535] usb 1-1.4: stat urb: status -71

    [ 3112.979748] usb 1-1.4: cmd cmplt err -71

    [ 3112.980013] usb 1-1.4: stat urb: status -71

    [ 3112.980106] usb 1-1.4: cmd cmplt err -71

    [ 3113.773124] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3114.467316] usb 1-1.4: stat urb: status -71

    [ 3114.467352] usb 1-1.4: cmd cmplt err -71

    [ 3114.680135] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3115.587072] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3116.494044] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3117.401011] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3118.307973] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3119.214944] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3120.121919] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3121.028869] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3121.935835] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3122.842797] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3123.749760] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3124.656715] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3125.567006] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3126.470628] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3127.377580] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3128.284541] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3129.191498] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3130.098456] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3131.005411] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3131.912361] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3132.819306] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3133.726259] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3134.633218] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3135.540162] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3136.447109] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3137.354052] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3138.261001] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3139.171278] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3140.074884] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3140.981839] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3141.888771] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3142.795716] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3143.305878] sd 0:0:0:0: [sda] tag#23 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD

    [ 3143.305900] sd 0:0:0:0: [sda] tag#23 CDB: opcode=0x2a 2a 00 03 08 13 80 00 00 08 00

    [ 3143.305912] sd 0:0:0:0: [sda] tag#21 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD

    [ 3143.305918] sd 0:0:0:0: [sda] tag#21 CDB: opcode=0x2a 2a 00 02 37 eb 00 00 00 10 00

    [ 3143.305928] sd 0:0:0:0: [sda] tag#20 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD

    [ 3143.305933] sd 0:0:0:0: [sda] tag#20 CDB: opcode=0x2a 2a 00 03 02 0f 50 00 00 08 00

    [ 3143.702656] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3144.532893] sd 0:0:0:0: [sda] tag#8 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD

    [ 3144.532914] sd 0:0:0:0: [sda] tag#8 CDB: opcode=0x2a 2a 00 02 b8 31 60 00 00 70 00

    [ 3144.549566] scsi host0: uas_eh_device_reset_handler start

    [ 3144.609591] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3144.623310] usb 1-1.4: reset high-speed USB device number 5 using xhci_hcd

    [ 3144.699782] usb 1-1.4: device descriptor read/64, error -71

    [ 3144.879826] usb 1-1.4: device descriptor read/64, error -71

    [ 3145.059886] usb 1-1.4: reset high-speed USB device number 5 using xhci_hcd

    [ 3145.133242] usb 1-1.4: device descriptor read/64, error -71

    [ 3145.313291] usb 1-1.4: device descriptor read/64, error -71

    [ 3145.500030] usb 1-1.4: reset high-speed USB device number 5 using xhci_hcd

    [ 3145.500200] usb 1-1.4: Device not responding to setup address.

    [ 3145.516526] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3145.706728] usb 1-1.4: Device not responding to setup address.

    [ 3145.913300] usb 1-1.4: device not accepting address 5, error -71

    [ 3145.986657] usb 1-1.4: reset high-speed USB device number 5 using xhci_hcd

    [ 3145.986951] usb 1-1.4: Device not responding to setup address.

    [ 3146.193540] usb 1-1.4: Device not responding to setup address.

    [ 3146.400134] usb 1-1.4: device not accepting address 5, error -71

    [ 3146.400413] scsi host0: uas_eh_device_reset_handler FAILED err -19

    [ 3146.400426] sd 0:0:0:0: Device offlined - not ready after error recovery

    [ 3146.400433] sd 0:0:0:0: Device offlined - not ready after error recovery

    [ 3146.400439] sd 0:0:0:0: Device offlined - not ready after error recovery

    [ 3146.400444] sd 0:0:0:0: Device offlined - not ready after error recovery

    [ 3146.400471] sd 0:0:0:0: [sda] tag#8 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=31s

    [ 3146.400480] sd 0:0:0:0: [sda] tag#8 CDB: opcode=0x2a 2a 00 02 b8 31 60 00 00 70 00

    [ 3146.400486] I/O error, dev sda, sector 45625696 op 0x1:(WRITE) flags 0x800 phys_seg 14 prio class 2

    [ 3146.400534] sd 0:0:0:0: [sda] tag#20 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=33s

    [ 3146.400540] Aborting journal on device sda9-8.

    [ 3146.400542] sd 0:0:0:0: [sda] tag#20 CDB: opcode=0x2a 2a 00 03 02 0f 50 00 00 08 00

    [ 3146.400547] I/O error, dev sda, sector 50466640 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 2

    [ 3146.400555] EXT4-fs warning (device sda9): ext4_end_bio:343: I/O error 10 writing to inode 390927 starting block 6308330)

    [ 3146.400556] EXT4-fs error (device sda9): ext4_journal_check_start:83: comm VideoPlayer: Detected aborted journal

    [ 3146.400580] sd 0:0:0:0: [sda] tag#21 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=33s

    [ 3146.400582] sd 0:0:0:0: rejecting I/O to offline device

    [ 3146.400589] sd 0:0:0:0: [sda] tag#21 CDB: opcode=0x2a 2a 00 02 37 eb 00 00 00 10 00

    [ 3146.400590] I/O error, dev sda, sector 45596672 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 2

    [ 3146.400592] EXT4-fs error (device sda9) in ext4_reserve_inode_write:5836: Journal has aborted

    [ 3146.400595] I/O error, dev sda, sector 37219072 op 0x1:(WRITE) flags 0x0 phys_seg 2 prio class 2

    [ 3146.400600] I/O error, dev sda, sector 45596672 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 2

    [ 3146.400603] EXT4-fs warning (device sda9): ext4_end_bio:343: I/O error 10 writing to inode 390979 starting block 4652384)

    [ 3146.400605] EXT4-fs error (device sda9): ext4_dirty_inode:6040: inode #390927: comm tvh:log: mark_inode_dirty error

    [ 3146.400607] Buffer I/O error on dev sda9, logical block 1081344, lost sync page write

    [ 3146.400613] Buffer I/O error on device sda9, logical block 34144

    [ 3146.400617] EXT4-fs error (device sda9) in ext4_dirty_inode:6041: Journal has aborted

    [ 3146.400622] JBD2: I/O error when updating journal superblock for sda9-8.

    [ 3146.400628] EXT4-fs warning (device sda9): ext4_end_bio:343: I/O error 10 writing to inode 390979 starting block 4652385)

    [ 3146.400634] EXT4-fs error (device sda9): ext4_journal_check_start:83: comm tvh:log: Detected aborted journal

    [ 3146.400643] sd 0:0:0:0: [sda] tag#23 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=33s

    [ 3146.400650] sd 0:0:0:0: [sda] tag#23 CDB: opcode=0x2a 2a 00 03 08 13 80 00 00 08 00

    [ 3146.400655] I/O error, dev sda, sector 50860928 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 2

    [ 3146.400662] EXT4-fs warning (device sda9): ext4_end_bio:343: I/O error 10 writing to inode 390927 starting block 6357616)

    [ 3146.400666] I/O error, dev sda, sector 36945920 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 2

    [ 3146.400670] Buffer I/O error on device sda9, logical block 1739376

    [ 3146.400676] I/O error, dev sda, sector 36945920 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 2

    [ 3146.400681] Buffer I/O error on dev sda9, logical block 0, lost sync page write

    [ 3146.400694] EXT4-fs (sda9): I/O error while writing superblock

    [ 3146.400700] EXT4-fs (sda9): Remounting filesystem read-only

    [ 3146.400702] EXT4-fs error (device sda9): ext4_journal_check_start:83: comm kworker/u8:3: Detected aborted journal

    [ 3146.400730] I/O error, dev sda, sector 36945920 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 2

    [ 3146.400738] I/O error, dev sda, sector 36945920 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 2

    [ 3146.400743] Buffer I/O error on dev sda9, logical block 0, lost sync page write

    [ 3146.400757] EXT4-fs (sda9): I/O error while writing superblock

    [ 3146.400765] EXT4-fs (sda9): failed to convert unwritten extents to written extents -- potential data loss! (inode 390927, error -30)

    [ 3146.400813] Buffer I/O error on device sda9, logical block 1690090

    [ 3146.400826] EXT4-fs (sda9): failed to convert unwritten extents to written extents -- potential data loss! (inode 390979, error -30)

    [ 3146.400859] Buffer I/O error on device sda9, logical block 34145

    [ 3146.400916] Buffer I/O error on dev sda9, logical block 0, lost sync page write

    [ 3146.400933] EXT4-fs (sda9): previous I/O error to superblock detected

    [ 3146.400950] Buffer I/O error on dev sda9, logical block 0, lost sync page write

    [ 3146.400961] EXT4-fs (sda9): I/O error while writing superblock

    [ 3146.401644] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3146.401667] usb 1-1.2.3: dvb_usb_v2: streaming_ctrl() failed=-19

    [ 3146.405222] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3146.405244] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3146.405253] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-19

    [ 3146.405818] dvb_usb_v2: 'MyGica Mini DVB-(T/T2/C) USB Stick T230C:1-1.2.3' successfully deinitialized and disconnected

    [ 3146.412256] usb 1-1.2.4: USB disconnect, device number 7

    [ 3146.680976] rpivid feb10000.codec: rpivid_h265_stop

    [ 3146.696910] usb 1-1.2: new high-speed USB device number 8 using xhci_hcd

    [ 3146.770482] usb 1-1.2: device descriptor read/64, error -71

    [ 3146.960522] usb 1-1.2: device descriptor read/64, error -71

    [ 3147.140366] usb 1-1.2: new high-speed USB device number 9 using xhci_hcd

    [ 3147.217298] usb 1-1.2: device descriptor read/64, error -71

    [ 3147.400704] usb 1-1.2: device descriptor read/64, error -71

    [ 3147.510856] usb 1-1-port2: attempt power cycle

    [ 3148.103984] usb 1-1.2: new high-speed USB device number 10 using xhci_hcd

    [ 3148.104286] usb 1-1.2: Device not responding to setup address.

    [ 3148.311005] usb 1-1.2: Device not responding to setup address.

    [ 3148.517413] usb 1-1.2: device not accepting address 10, error -71

    [ 3148.597433] usb 1-1.2: new high-speed USB device number 11 using xhci_hcd

    [ 3148.597680] usb 1-1.2: Device not responding to setup address.

    [ 3148.807815] usb 1-1.2: Device not responding to setup address.

    [ 3149.017558] usb 1-1.2: device not accepting address 11, error -71

    [ 3149.017939] usb 1-1-port2: unable to enumerate USB device

    [ 3149.018911] usb 1-1.3: USB disconnect, device number 4

    [ 3149.100943] usb 1-1.3: new high-speed USB device number 12 using xhci_hcd

    [ 3149.177859] usb 1-1.3: device descriptor read/64, error -71

    [ 3149.364601] usb 1-1.3: device descriptor read/64, error -71

    [ 3149.544395] usb 1-1.3: new high-speed USB device number 13 using xhci_hcd

    [ 3149.617994] usb 1-1.3: device descriptor read/64, error -71

    [ 3149.801385] usb 1-1.3: device descriptor read/64, error -71

    [ 3149.908369] usb 1-1-port3: attempt power cycle

    [ 3150.501360] usb 1-1.3: new high-speed USB device number 14 using xhci_hcd

    [ 3150.501651] usb 1-1.3: Device not responding to setup address.

    [ 3150.708313] usb 1-1.3: Device not responding to setup address.

    [ 3150.914805] usb 1-1.3: device not accepting address 14, error -71

    [ 3150.991487] usb 1-1.3: new high-speed USB device number 15 using xhci_hcd

    [ 3150.991774] usb 1-1.3: Device not responding to setup address.

    [ 3151.198506] usb 1-1.3: Device not responding to setup address.

    [ 3151.404946] usb 1-1.3: device not accepting address 15, error -71

    [ 3151.405438] usb 1-1-port3: unable to enumerate USB device

    [ 3151.406387] usb 1-1.4: USB disconnect, device number 5

    [ 3151.407776] blk_print_req_error: 4 callbacks suppressed

    [ 3151.407788] device offline error, dev sda, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2

    [ 3151.520147] device offline error, dev sda, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2

    [ 3151.520539] EXT4-fs (sda7): unmounting filesystem.

    [ 3151.521018] device offline error, dev sda, sector 5578752 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 2

    [ 3151.521046] device offline error, dev sda, sector 5578752 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 2

    [ 3151.521053] Buffer I/O error on dev sda7, logical block 0, lost sync page write

    [ 3151.521077] EXT4-fs (sda7): I/O error while writing superblock

    [ 3151.630837] device offline error, dev sda, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2

    [ 3151.634135] device offline error, dev sda, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2

    [ 3151.635963] FAT-fs (sda11): Directory bread(block 513) failed

    [ 3151.635996] FAT-fs (sda11): Directory bread(block 514) failed

    [ 3151.636005] FAT-fs (sda11): Directory bread(block 515) failed

    [ 3151.636015] FAT-fs (sda11): Directory bread(block 516) failed

    [ 3151.636023] FAT-fs (sda11): Directory bread(block 517) failed

    [ 3151.636032] FAT-fs (sda11): Directory bread(block 518) failed

    [ 3151.636041] FAT-fs (sda11): Directory bread(block 519) failed

    [ 3151.636057] FAT-fs (sda11): Directory bread(block 520) failed

    [ 3151.636066] FAT-fs (sda11): Directory bread(block 521) failed

    [ 3151.636074] FAT-fs (sda11): Directory bread(block 522) failed

    [ 3151.636215] EXT4-fs error (device sda12): __ext4_find_entry:1663: inode #2: comm udevil: reading directory lblock 0

    [ 3151.636283] EXT4-fs error (device sda10): __ext4_find_entry:1663: inode #2: comm udevil: reading directory lblock 0

    [ 3151.636364] EXT4-fs error (device sda12): __ext4_find_entry:1663: inode #2: comm udevil: reading directory lblock 0

    [ 3151.636389] EXT4-fs error (device sda10): __ext4_find_entry:1663: inode #2: comm udevil: reading directory lblock 0

    [ 3151.639600] systemd-journald[308]: Data hash table of /run/log/journal/877ce4b44928576324bb64375caf6b34/system.journal has a fill level at 75.1 (1537 of 2047 items, 524288 file size, 341 bytes per hash table item), suggesting rotation.

    [ 3151.639623] systemd-journald[308]: /run/log/journal/877ce4b44928576324bb64375caf6b34/system.journal: Journal header limits reached or header out-of-date, rotating.

    [ 3151.665295] EXT4-fs error (device sda9): __ext4_find_entry:1663: inode #130305: comm samba-autoshare: reading directory lblock 0

    [ 3151.675095] sd 0:0:0:0: [sda] Synchronizing SCSI cache

    [ 3151.767498] EXT4-fs error (device sda9): __ext4_find_entry:1663: inode #390958: comm PVRManager: reading directory lblock 0

    [ 3151.801679] Buffer I/O error on dev sda10, logical block 139265, lost sync page write

    [ 3151.801793] JBD2: I/O error when updating journal superblock for sda10-8.

    [ 3151.801802] Aborting journal on device sda10-8.

    [ 3151.805634] Buffer I/O error on dev sda10, logical block 139265, lost sync page write

    [ 3151.805715] JBD2: I/O error when updating journal superblock for sda10-8.

    [ 3151.805770] EXT4-fs error (device sda12): __ext4_find_entry:1663: inode #2: comm udevil: reading directory lblock 0

    [ 3151.807002] EXT4-fs (sda10): unmounting filesystem.

    [ 3151.811904] EXT4-fs error (device sda12): __ext4_find_entry:1663: inode #2: comm udevil: reading directory lblock 0

    [ 3151.813877] EXT4-fs error (device sda12): __ext4_find_entry:1663: inode #2: comm udevil: reading directory lblock 0

    [ 3151.818735] EXT4-fs error (device sda12): __ext4_find_entry:1663: inode #2: comm udevil: reading directory lblock 0

    [ 3151.831817] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=0x07 driverbyte=DRIVER_OK

    [ 3151.850771] EXT4-fs error (device sda9): __ext4_find_entry:1663: inode #130305: comm samba-autoshare: reading directory lblock 0

    [ 3151.868088] EXT4-fs error (device sda9): __ext4_find_entry:1663: inode #130305: comm samba-autoshare: reading directory lblock 0

    [ 3151.868167] EXT4-fs error (device sda9): __ext4_find_entry:1663: inode #130305: comm samba-autoshare: reading directory lblock 0

    [ 3151.905122] usb 1-1.4: new high-speed USB device number 16 using xhci_hcd

    [ 3151.915207] EXT4-fs error (device sda9): __ext4_find_entry:1663: inode #130321: comm crond: reading directory lblock 0

    [ 3151.985345] usb 1-1.4: device descriptor read/64, error -71

    [ 3152.165401] usb 1-1.4: device descriptor read/64, error -71

    [ 3152.345253] usb 1-1.4: new high-speed USB device number 17 using xhci_hcd

    [ 3152.418811] usb 1-1.4: device descriptor read/64, error -71

    [ 3152.598862] usb 1-1.4: device descriptor read/64, error -71

    [ 3152.705784] usb 1-1-port4: attempt power cycle

    [ 3152.768393] EXT4-fs error (device sda9): __ext4_find_entry:1663: inode #390958: comm PVRManager: reading directory lblock 0

    [ 3153.305488] usb 1-1.4: new high-speed USB device number 18 using xhci_hcd

    [ 3153.305792] usb 1-1.4: Device not responding to setup address.

    [ 3153.512490] usb 1-1.4: Device not responding to setup address.

    [ 3153.718930] usb 1-1.4: device not accepting address 18, error -71

    [ 3153.769339] EXT4-fs error (device sda9): __ext4_find_entry:1663: inode #390958: comm PVRManager: reading directory lblock 0

    [ 3153.795624] usb 1-1.4: new high-speed USB device number 19 using xhci_hcd

    [ 3153.795898] usb 1-1.4: Device not responding to setup address.

    [ 3154.002571] usb 1-1.4: Device not responding to setup address.

    [ 3154.209075] usb 1-1.4: device not accepting address 19, error -71

    [ 3154.209474] usb 1-1-port4: unable to enumerate USB device

    [ 3154.770184] EXT4-fs error (device sda9): __ext4_find_entry:1663: inode #390958: comm PVRManager: reading directory lblock 0

    [ 3155.771015] EXT4-fs error (device sda9): __ext4_find_entry:1663: inode #390958: comm PVRManager: reading directory lblock 0

    [ 3156.771858] EXT4-fs error (device sda9): __ext4_find_entry:1663: inode #390958: comm PVRManager: reading directory lblock 0

    [ 3157.360005] Buffer I/O error on dev sda12, logical block 1081344, lost sync page write

    [ 3157.360034] JBD2: I/O error when updating journal superblock for sda12-8.

    [ 3157.360039] Aborting journal on device sda12-8.

    [ 3157.360046] Buffer I/O error on dev sda12, logical block 1081344, lost sync page write

    [ 3157.360053] JBD2: I/O error when updating journal superblock for sda12-8.

    [ 3157.772692] EXT4-fs error (device sda9): __ext4_find_entry:1663: inode #390958: comm PVRManager: reading directory lblock 0

    [ 3158.773753] EXT4-fs error (device sda9): __ext4_find_entry:1663: inode #390958: comm PVRManager: reading directory lblock 0

    [ 3159.774975] EXT4-fs error (device sda9): __ext4_find_entry:1663: inode #390958: comm PVRManager: reading directory lblock 0

    [ 3160.776314] EXT4-fs error (device sda9): __ext4_find_entry:1663: inode #390958: comm PVRManager: reading directory lblock 0

    [ 3161.324808] EXT4-fs error (device sda9): __ext4_find_entry:1663: inode #2: comm tvh:tasklet: reading directory lblock 0

    [ 3161.324961] EXT4-fs error (device sda9): __ext4_find_entry:1663: inode #2: comm tvh:tasklet: reading directory lblock 0

    [ 3161.777613] EXT4-fs error (device sda9): __ext4_find_entry:1663: inode #390958: comm PVRManager: reading directory lblock 0

    [ 3162.778658] EXT4-fs error (device sda9): __ext4_find_entry:1663: inode #390958: comm PVRManager: reading directory lblock 0

    [ 3163.779497] EXT4-fs error (device sda9): __ext4_find_entry:1663: inode #390958: comm PVRManager: reading directory lblock 0

    The same issue with:

    nightly-20230225-ef1ce97 (RPi4.arm)

    Linux LE 6.1.12 #1 SMP Sun Feb 26 01:05:07 UTC 2023 aarch64 GNU/Linux


    [ 2336.473419] rpivid feb10000.codec: PPS changed

    [ 2336.507158] rpivid feb10000.codec: PPS changed

    [ 2336.557833] rpivid feb10000.codec: PPS changed

    [ 2336.589999] rpivid feb10000.codec: PPS changed

    [ 2336.623415] rpivid feb10000.codec: PPS changed

    [ 2336.657970] rpivid feb10000.codec: PPS changed

    [ 2336.692130] rpivid feb10000.codec: PPS changed

    [ 2336.715026] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [ 2336.756830] rpivid feb10000.codec: PPS changed

    [ 2336.790121] rpivid feb10000.codec: PPS changed

    [ 2336.823444] rpivid feb10000.codec: PPS changed

    [ 2336.857484] rpivid feb10000.codec: PPS changed

    [ 2336.891210] rpivid feb10000.codec: PPS changed

    [ 2336.959178] rpivid feb10000.codec: PPS changed

    [ 2336.972596] rpivid feb10000.codec: PPS changed

    [ 2336.988454] rpivid feb10000.codec: PPS changed

    [ 2338.848351] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [ 2340.981671] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [ 2340.981697] usb 1-1.2.3: dvb_usb_v2: streaming_ctrl() failed=-110

    [ 2340.987204] rpivid feb10000.codec: rpivid_h265_stop

    [ 2343.115065] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [ 2345.248423] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [ 2347.381740] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [ 2349.515097] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [ 2351.648426] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [ 2353.781799] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [ 2355.915119] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [ 2358.048480] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [ 2360.181873] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [ 2362.315142] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [ 2364.448501] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [ 2366.581837] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [ 2368.715190] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    [ 2370.848522] usb 1-1.2.3: dvb_usb_v2: usb_bulk_msg() failed=-110

    Quote from jahutchi

    ...

    Personally, I worked around the issue by buying a usb hub and programmatically cycling the usb port power using uhubctl when the error is encountered (thus not requiring a full reboot), but this is obviously far from ideal.

    ...

    Hi jahutchi!

    I think I have the same problem with my setup (LibreELEC (official): 11.0.1 (RPi2.arm), kernel 6.1.19).

    I would like to implement your solution, e.g. power off and on the usb port to which the 'MyGica Mini DVB-(T/T2/C) USB Stick T230C v2" is connected.


    How can I install the uhubctl utility on LibreElec? Can you give me some directions?

    On my setup the problem blasts almost every day ;(

    Thank you!

    No idea how you'd install uhubctl on Libreelec I'm afraid. I have my tvheadend (server) setup on Arch Linux.