I have installed a fresh new image of LibreElec in My RPi-4 and after few days it is not booting up properly. Please see the image:
OS: LibreElec 10.0.2
Hardware: RPi-4 8 GB
LibreElec not booting fail to start Setup machine-id
-
prakashpandey -
July 25, 2022 at 1:28 PM -
Thread is Resolved
-
Impossible to say without seeing the full earlier boot log (which will be challenging to collect). I'd guess a corrupted or failing SD card.
-
Read post #3 again.
-
Bus error (in your very first picture) could also mean an insufficient power supply (the official RPi PS is highly recommended, use that if possible).
so long,
Hias
-
- Remove the microSD card.
- Mount the STORAGE partition of the microSD on a Linux PC.
- Make hidden files visible on your file browser.
- Go to .kodi/userdata.
- Create the file advancedsettings.xml with this content:
Code<advancedsettings> <loglevel>2</loglevel> </advancedsettings>- Unmount the microSD, and put it into RPi.
- Start RPi, wait for kernel panic, and turn off RPi.
- Mount the STORAGE partition of the microSD on a Linux PC.
- Go to .kodi/temp.
- Upload the content of kodi.log to Pastebin.
- Post the resulting Pastebin link here.
-
Da Flex : So sorry. I formatted the SD Card before reading this comment.
OK. Everything fine now?
