Skipping/Stuttering on SD IPTV with 10.0.2

Hello!

I have a weird problem with my RPi4 since i updated to LE 10.0.2

I watch TV Streams via TV-Headend-Server and TV Headend Client. It worked fine with LE 10.0.1

Since 10.0.2, the 720x576@50 streams started to stutter and to skip frames. The 1280x720@50 streams work fine, so it doesn‘t seem to be a performance issue. I tested using force_turbo=1 and/or core_freq_min=500 in the config.txt though to no avail.

So, HD-Streams@50fps work fine, while SD-Streams@50fps don’t.

I turned off the new deinterlace option available on 10.0.2 , it reduced the stuttering but didn‘t remove it.

I have a sample 720x576@50 stream, it‘s only 9mb in size.

Greetings, Dominique

A sample Stream is located here (plays fine with 10.0.1, skipping/stutter with 10.0.2, always reproduceable):

https://file.io/1KVGjfojiB1U

shared with file.io - super simple file sharing

file.io

iptv-50fps-720x576-sample

www.mediafire.com

Thanks for investigating! I tried turning off the PRIME Decoder completely, which didn‘t cure the problem. The trick is to leave the PRIME Decoder activated but to turn off only PRIME HW acceleration. This way it‘s indeed working again as before

So the issue seems to be in „basic“ software decoding also.

when does the PRIME HW Acceleration kick in anyway?

Which parts of the decoding benefit?

I can't find a difference, other than the SD IPTV working again Maybe the HW Acceleration is only relevant for 4K? (i only use Full-HD)

is there a possibility to turn HW Acceleration on/off with a shortcut on the remote?

Is there a kodi-send command to toggle HW Acceleration?

Is there a possibility to turn on HW Acceleration only for HEVC content?

how should i install it? Via update folder?

OK, i‘ll test as soon as possible. Thanks.

OK, i installed via update folder and can confirm the fix is working

The problematic SDTV Streams are running fine now, the Prime HW decoder ist working again as with 10.0.1

Thanks! This fix will be in 10.0.3 then?

I will Thanks

Has the "plain" decoder (w/o PRIME) been fixed too? (i had the same issues when using the plain decoder w/o PRIME too)

The provided sample had the issue when PRIME was completely disabled.

Success also reported here:

Post

RE: LE10 & deinterlacing in RPi4

[…]

WOW! That is an amazing improvement HiassofT! The jerkiness in the panning scenery is totally gone when I stream the source *.TS file from the Pi3 TVHeadend server to the TVHeadend client on the Pi4. With the Pi4's video set to 1080 @ 50hz with no auto display rate adjusting, all the movement is smooth with the de-interlacing being nice and crisp too.

Excellent news that this will be going into LE10.0.03, and thanks for the help.

sunny

April 19, 2022 at 8:35 AM

sorry HiassofT , i have to warm up this topic. The stuttering bug is back with 11.0.1.

Once i updated to LE 11.0.1 i have problems with my SD TV Streams again. I hope you still have my provided sample or it's still available for download (see first post)

It's reproduceable once HW decoding is active. The streams work fine with software decoding.

It's not as heavy as it was in 10.0.2 but still very annoying.

Heres the sample (again)

https://www.swisstransfer.com/d/78b0aec1-327c-4682-a7bd-7655e41b9b12