Autorepeat problem with DVB-S2 tuner IR Remote Control

Hello everyone,

Sory to bump this issue again after 3 years but what happened at that time was the driver for my technotrend tt-4600 having alot of problems and I was not able to use it proparly and one of them was the autorepeat of the IR remote control as you can see in this thread, so I ended up all plans and projects for a media center at that time.

I decided to give it a try again now since I have found that the driver is working without any problems once crazycat drivers are activated. I would like to use the IR remote supplied with the tuner.

I know you have advised me to get an MCE USB remote control that will work OOTB but it seems that it is not available for online orders anymore and even if you find it, it will not be practical to buy it (under its current price) with international shipping cost in addition compared to the price of the raspberry pi for example.

So HiassofT solved in that thread most of the problem and he was nice enough to build an image and uploade it in the thread and explained what he did. Is there any way for some one like me without any skills in linux to repeat that again or at least find a way to learn what he did so I could do it myself (the kernel patch)?.

The idea is that I don't want to be a burden every time in fixing these issues and I would like to learn.

Best Regards

Hello again, anyone can help with this please?

Thank you CvH for your reply. It's more about the desire to learn what has been done and not to waste a piece of hardware that is laying around...that's it. I know that using a USB remote will be much better but it was the desire to learn something. I know this is not a forum to teach Linux but what really made me post this again is what I have told you above. I like to learn how to tune things to my preferences. One more thing to mention is that the remote works without any problem under windows using TTviewer as there is an option in the software to set "Antirepeat to 125ms", and that what made me believe that it should be achievable in libreelec that's why I was trying to tune it. But again I don't have the required coding skills.

I'm willing to learn. It will be a very nice experiment. I would really appreciate if someone tells me where to start.

Thanks to you all

I'm sorry to bother you HiassofT again after a long time but could you please take a look. Thank you in advance.

Regards

Quote from HiassofT

Code

LibreELEC:~ # evrepeat -d 1000 /dev/input/event0
Repeat delay = 500 ms, repeat period = 125 ms
Changed repeat delay to 1000 ms and repeat period to 125 ms

Thank you very much for your reply. But this is what I get when trying to apply evrepeat:

 mj:~ # ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event1) with:
        Name: TechnoTrend TT-connect S2-4600
        Driver: dw2102, table: rc-tt-1500
        lirc device: /dev/lirc0
        Supported protocols: rc-5
        Enabled protocols: rc-5
        bus: 3, vendor/product: 0b48:3011, version: 0x0000
        Repeat delay = 500 ms, repeat period = 125 ms
mj:~ # evrepeat -d 1000 /dev/input/event1
-sh: evrepeat: not found

Do I need to install something before trying to use evrepeat?

Regards

Quote from HiassofT

Which LE version are you using`? If you are still on LE9.x simply run "ir-keytable -D 1000".

so long,

Hias

Thank you very much. Indeed I'm still using 9.2.8 because this is the latest for RP3. ir-keytable worked. but it did not solve the problem and I give up now. Thank you very much for your help.

I was wondering in case it worked how would you make that change persistent? because every time you reboot the original values for D and P is modified again.

Thanks again for your time

Best Regards