Getting LE to use a custom remote control map

Using the wiki, I figured out that LE was using the keymap for tanix_tx5max for my Android box, copied the file from /usr/lib/udev/rc_keymaps to /storage/.config/rc_keymaps, figured out the keycodes using ir-keytable and edited the keymap file. Everything works.

I copied this keymap to a file with the name of my box, changed the name field to match and created a simple /storage/.config/rc_maps.cfg with the single line "* * path-to-new-keymap" but LE still wants to use the tanix_tx5max keymap. I'm curious as to what else I need to change to get it to use the new file.

Thanks

It seems to still use the old keymap

# ir-keytable
Found /sys/class/rc/rc0/ with:
        Name: sunxi-ir
        Driver: sunxi-ir
        Default keymap: rc-tanix-tx5max
        Input device: /dev/input/event4
        LIRC device: /dev/lirc0
        Attached BPF protocols:
        Supported kernel protocols: lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp imon rc-mm
        Enabled kernel protocols: lirc nec
        bus: 25, vendor/product: 0001:0001, version: 0x0100
        Repeat delay = 500 ms, repeat period = 125 ms

Good point. Maybe I'm being misled by:

Default keymap: rc-tanix-tx5max

Where is LE getting the information to use that as the default?

Also, I have the modified rc-tanix-t5max keymap and the new keymap files (identical contents) in /storage/.config/rc_keymaps so it might very well be taking the keymap from the "new" file

I will try it out in the next few days and report back

I tried making the files different and LE is using the new file!

Thanks