Imon MCE Not working with LE 10.0b1 Generic Kodi19

polarrys · April 2, 2021 at 10:33 AM

Dear All,

I have upgraded LE with LE10.0b1 on Intel System. I'm using a Origen M10 case with a Harmony Remote Hub.

All is working for me except Harmony Remote. I installed LCDProc, XBMC LCDProc and Imon MCE. I choose Imon on configuration on LCDProc.

With LE 9, All worked. And now, with LE10, my Harmony Remote is not working (I chose Microsoft Media Center SE and Edition Keyboard).

Can someone help me on this problem ?

Regards.

polarrys · April 6, 2021 at 2:52 PM

Any help for this problem?

I am the only one

cw-kid · April 6, 2021 at 4:10 PM

I have the exact same HTPC case and setup as yours with a Harmony hub remote. I haven't updated LibreElec to version 10.x yet however. I will be watching this thread though. I hope you get some answers.

polarrys · April 6, 2021 at 4:56 PM

Dear cw-kid,

Thanks you for your answer.

I'm sure that LE 10 or add-on have a problem. When I use LE 9, all was ok.

May be I must return on LE9 unil a stable version of LE10 up

**HiassofT** · April 6, 2021 at 5:09 PM

polarrys can you check if you remote works if you run the following command?

Code

ir-keytable -c -w /usr/lib/udev/rc_keymaps/imon_mce.toml

so long,

Hias

polarrys · April 6, 2021 at 5:21 PM

Dear Hiassoft

This is the answer :

Code

Read imon_mce table
Old keytable cleared
Wrote 74 keycode(s) to driver
Protocols changed to rc-6

Edit : I test my Harmony Remote and It works !

Thanks Hiassoft !

**HiassofT** · April 6, 2021 at 5:37 PM

Thanks for testing!

In this case just uninstall the imon addon and create a /storage/.config/rc_maps.cfg file with the following content

Code

* * imon_mce.toml

This will make the configuration permanent and is basically what the addon tried to achieve (just in a slightly broken way).

so long,

Hias

polarrys · April 6, 2021 at 5:51 PM

Thanks HiassofT for your help.

cw-kid, you can now install LE10

fijalka · June 21, 2021 at 5:57 PM

Excuse me English

LibreELEC-ARMv8.arm-10.0-devel-20210621110449-8bd19d9-rk3328.img.gz

Good routing already works for me IR on MX10 RK3328 4Gb DDR4 / 32Gb emmc

Board: MXQ-RK3328-D4_A Ver: 1.2 DATE:20180725

\\LibreELEC\Configfiles\rc_maps.cfg

\\LibreELEC\Configfiles\rc_keymaps\MX10.toml

liberi · November 30, 2021 at 7:14 AM

Hello, hello developer, hello @HiassofT

where we have a LiebreELEC 10 documention to config ir-remote?

Every readme in LibreELEC 10.0.1 without letter.

IR-Remote isn't Add-on Support.

~~Please answer in this thread:~~ ~~LibreElec 10.0.1 with IR-Remote~~

Greetz

liberie

**Da Flex** · November 30, 2021 at 8:37 AM

liberi There is no need for such thread advertising. Don't do this again.

liberi · November 30, 2021 at 8:47 AM

Hello Da Flex , what is the right way to get a answer in the right thread?

My problem isn't an Add-on Support problem.

I have edit my posting.

**Da Flex** · November 30, 2021 at 10:12 AM

liberi Wait at least one week for an answer. If you don't get any reply, you can "bump" the thread on top again by writing about your current state of research.

Imon MCE Not working with LE 10.0b1 Generic Kodi19

Similar Threads

LibreELEC 9.2.6 Raspberry 4 and IrDA Dongle