Legacy v9.2 (LTS) builds for Amlogic S805/S8X2, S905/S912 and all WeTek boxes

Zaidikas · August 3, 2026 at 10:53 AM

Hello what release would be possible for Netxeon M82G V2.0 S812/2G/8GAP6330 Android TV Box

**dtech** · August 3, 2026 at 1:55 PM

Quote from Zaidikas

Hello what release would be possible for Netxeon M82G V2.0 S812/2G/8GAP6330 Android TV Box

You will probably need the Universal_n200_2G image from here: https://libreelec.dtech.hu/images/3rdParty/.

Zaidikas · August 3, 2026 at 7:18 PM

By the way good software. Should enlighten how to install into box internal memory, now it seems its always boots from SD card? If its boots only from SD its also okey. I'm happy with your job so far, just need to configure youtube API

**dtech** · August 4, 2026 at 4:59 AM

Quote from Zaidikas

Should enlighten how to install into box internal memory

You can find the answer to your question in three places:

In the opening post of this topic, here: Legacy v9.2 (LTS) builds for Amlogic S805/S8X2, S905/S912 and all WeTek boxes,
On LE-AML's own site, at the bottom of the page, in the description, here: https://libreelec.dtech.hu/,
In the readme of the LE-AML GitHub repository, here: https://github.com/dtechsrv/LibreELEC-AML.

Sorry, but I don't want to type it in more places than these. Please do some research, I didn't hide the basic information too much. Thanks.

Zaidikas · August 4, 2026 at 10:25 AM

Okey, I see. One more question is it worth to try install internally or its completely fine to boot every time from sd card?

**dtech** · August 4, 2026 at 11:51 AM

Quote from Zaidikas

Okey, I see. One more question is it worth to try install internally or its completely fine to boot every time from sd card?

Basically, this is a user decision. R/W operations on SD cards are fundamentally slower than running the system from the internal eMMC. In addition, in the case of some boxes, it is practical experience that even the real MAC address of the Ethernet cannot be determined if you boot from an SD card, it is only recognized correctly during internal boot.

However, if you still need the original (in most cases Android) system, then I do not recommend this step, because it will be overwritten, and then you can only restore it if you have the original ROM. In many cases, Android on the internal memory is no longer supported, so there is not much to lose there. But, as I said, this is a user decision.

kdem · September 7, 2026 at 3:24 PM

Hi, thanks for the builds.
I’m on a Minix Neo U9-H and installed your latest version.

I have some trouble with the remote configuration. I looked around on the wikis and the forums but to no avail. It’s the one pictured here. It comes out of the box but is not the Minix A2 or A3 (couldn’t find any reference about it).

ir-keytable does not return anything useful (stubbornly /sys/class/rc/: No such file or directory) but dmesg -c does return some stuff about a remote. Indeed, pressing some buttons does have an effect, but everything is garbled (pressing the power button on the remote acts as Vol+...)

If you find it useful i will link the result of dmesg -c over ssh (please not that I used an external Dell mouse to navigate, as the remote doesn’t work)

I’m fairly new at this, I’d appreciate any insight