My all scanned channels showing in kodi, but, not playing, I restore my backup for all settings, nothing works,
Did the tuner finally appear on the adapter page after you changed the driver?
Also, please confirm that you updated your box using WeTek_Play_2 update tar image and not Generic_S905.
I used arrowed file, asked u in previous post, is there any device tree issue ? , Its better to try fresh install rather update ?
I used arrowed file, asked u in previous post, is there any device tree issue ?
Okay, you used the correct file when updating. A device tree issue is not possible, because the dtb will also be updated.
However, you didn't answer my other question, which is also just as important:
Did the tuner finally appear on the adapter page after you changed the driver?
DVB driver change: Add-ons -> Program add-ons -> LibreELEC Module Drivers
And you could also send a link generated by pastekodi needs to be run on console, hopefully something will be revealed from the logs.
Okay, you used the correct file when updating. A device tree issue is not possible, because the dtb will also be updated.
However, you didn't answer my other question, which is also just as important:
DVB driver change: Add-ons -> Program add-ons -> LibreELEC Module Drivers
And you could also send a link generated by pastekodi needs to be run on console, hopefully something will be revealed from the logs.
Not change the driver, I go back again for 9.0.2, may again try tonight and follow your recommendation
However, you didn't answer my other question, which is also just as important:
DVB driver change: Add-ons -> Program add-ons -> LibreELEC Module Drivers
As your directions , its working now, Now I am able to select the UHD resolution 
any other advantage can I get now after this slight higher version
any other advantage can I get now after this slight higher version
If this was meant to be a question (because the question mark is missing), then it is quite difficult to summarize.
Quite a lot has been added since the last release of the official LE 9.2.6: several amlogic specific patches added, many built-in packages updated, certificates updated, quite a few addons also updated, external binary addons added (e.g. tvheadend v4.3), Leia-related Youtube addon repo added (this is also constantly updated), etc.
If you have the patience for it, you can read the changelog in the leading post.
Sometime UHD res showing whitelist and other time disappear, what is the reason for wp2 ?
Sometime UHD res showing whitelist and other time disappear, what is the reason for wp2 ?
Unfortunately, I have no idea, I haven't seen anything like it before.
First of all, I would recommend changing the HDMI cable, but since the S905 SoC (GXBB) in WP2 only meets the HDMI 1.4 specification, even the cable can't be the cause.
Unfortunately, I have no idea, I haven't seen anything like it before.
First of all, I would recommend changing the HDMI cable, but since the S905 SoC (GXBB) in WP2 only meets the HDMI 1.4 specification, even the cable can't be the cause.
Is there DVB drivers issue possible ?
Is there DVB drivers issue possible ?
I don't think so, but I still don't understand exactly what the error above means, because you still haven't sent a log.
Does it produce this between boots if connected to the same TV and same input?
A log would be good for both cases, when the relevant resolution appears and when it doesn't.
is there a way to assign key of my wp2 remote or some hot keys options
Updated statement of Docker support for LibreELEC-AML v9.2 (LTS)
The current version is now available via auto-update channel, as well as via the links in the leading post, and support extends to 3rdParty images as well.
The Docker binary has been added to the repository, but the LinuxServer.io repository addon was not added, because the 32-bit ARM images are no longer updated:
